Vigtige sikkerhedsoplysninger
Please read this manual carefully before operating the Ingco hldd0401 Laser Distance Meter. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.
- Lasersikkerhed: This device emits a Class 2 laser. Do not stare directly into the laser beam or direct it at other people. Avoid direct eye exposure.
- Batterisikkerhed: Use only the specified battery type (Alkaline). Do not mix old and new batteries. Remove batteries if the device will not be used for an extended period.
- Miljøforhold: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
- Opretholdelse: Forsøg ikke at modificere eller skille enheden ad. Reparationer bør kun udføres af autoriseret servicepersonale.
- Børn: Opbevar enheden utilgængeligt for børn.
Produkt overview
The Ingco hldd0401 is a compact and reliable laser distance meter designed for accurate distance measurements. It features a clear display and intuitive controls for various measurement functions.
This image displays the Ingco hldd0401 Laser Distance Meter. It features a black body with yellow accents, a clear digital display showing measurement values, and a control panel with buttons for power (ON/OFF), function (FUNC), unit conversion (UNIT), and clear/off (C/OFF). A red button with an asterisk and 'ON' is prominent for laser activation.
Komponenter
- Laser Emission Aperture: Where the laser beam exits.
- Lasermodtagerlinse: Registrerer den reflekterede laserstråle.
- Skærm: Viser måleresultater og enhedens status.
- Kontrolknapper: For various functions and operations.
- Batterirum: Placeret bagpå til montering af batteri.
- Reference Edge: The point from which measurements are taken (typically the rear of the device).
Opsætning
Installation af batteri
- Find batteridækslet på bagsiden af enheden.
- Skub eller afklips dækslet for at åbne rummet.
- Insert the required Alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment. (Note: Batteries are not included with the product).
- Luk batterirummets dæksel forsvarligt.
Betjeningsvejledning
Tænd/sluk
- For at tænde: Tryk på ON button (often red with an asterisk symbol). The display will illuminate.
- For at slukke: Tryk og hold på C/OFF -knappen i et par sekunder. Enheden slukker også automatisk efter en periode med inaktivitet for at spare på batteriet.
Grundlæggende afstandsmåling
- Tænd for enheden.
- Point the laser aperture towards the target surface.
- Tryk på ON button once to activate the laser pointer.
- Tryk på ON button again to take a measurement. The measured distance will appear on the display.
Måletilstande
The device typically supports various measurement modes. Press the FUNK knap til at gennemgå tilgængelige tilstande:
- Enkeltafstandsmåling: Measures the distance between the device and a single target point.
- Kontinuerlig måling (sporing): Continuously measures and displays the distance as you move the device, showing minimum and maximum values.
- Områdemåling: Measures two sides (length and width) to calculate the area.
- Volumenmåling: Measures three sides (length, width, height) to calculate the volume.
- (Other modes may include Pythagorean theorem for indirect measurements, addition/subtraction, etc. Refer to on-screen icons for specific mode identification.)
Enhedskonvertering
To change the measurement unit (e.g., meters, feet, inches), press the ENHED knappen. Displayet vil skifte mellem de tilgængelige enheder.
Justering af referencepunkt
The device can measure from its front edge or its rear edge. Press the reference point button (often combined with another function or a dedicated button) to switch between these reference points. An icon on the display will indicate the current reference point.
Opretholdelse
- Rensning: Brug en blød, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
- Opbevaring: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries.
- Batteripleje: Replace batteries when the low battery indicator appears on the display. Dispose of used batteries responsibly according to local regulations.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Lave eller døde batterier; forkert batteriinstallation. | Udskift batterierne; kontroller batteripolariteten. |
| Upræcise målinger. | Laser lens is dirty; unstable measurement surface; strong light interference; incorrect reference point. | Clean laser lens; ensure stable measurement; avoid strong light; verify reference point setting. |
| Laserstrålen er ikke synlig. | Device not powered on; laser not activated; strong ambient light. | Power on device; press ON button to activate laser; operate in lower light conditions if possible. |
| Fejlmeddelelse på displayet. | Måling uden for område; intern fejl. | Ensure target is within measurement range; power cycle the device. If error persists, contact support. |
Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Model | hldd0401 |
| Mærke | Ingco |
| Laser klasse | Klasse 2 |
| International beskyttelsesklassificering (IP) | IP54 (støvbeskyttet, stænksikker) |
| Batteritype | Alkalisk (ikke inkluderet) |
| Fabrikant | Ingco |
| ASIN | B01LFDXE5I |
Garanti og support
Specific warranty information for the Ingco hldd0401 Laser Distance Meter is not provided in this manual. For details regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact your retailer or the manufacturer directly.
For technical support or service inquiries, please visit the official Ingco webwebsted eller kontakt deres kundeserviceafdeling.
