1. Introduktion
The Xilence Performance C CPU Cooler XC032 is engineered to provide efficient and quiet cooling for high-performance Intel CPUs. Featuring a 92mm PWM fan with fluid bearing, it ensures optimal airflow while maintaining low noise levels. This cooler is designed for compatibility with various Intel sockets and includes a stable mounting backplate for secure installation.
2. Sikkerhedsoplysninger
- Always disconnect power from your computer before installing or performing maintenance on any internal components.
- Handle the CPU cooler and other components with care to avoid damage to sensitive parts.
- Ensure proper grounding to prevent electrostatic discharge (ESD) which can damage electronic components.
- Opbevares utilgængeligt for børn.
- Bloker ikke ventilatorens luftstrøm under drift.
- Refer to your motherboard's manual for specific CPU cooler installation guidelines.
3. Pakkens indhold
Bekræft, at alle nedenstående komponenter er til stede i din pakke:
- I250PWM Intel CPU Cooler
- 92 mm PWM Fan (integrated)
- Ventilator skruer
- Termopasta (påført på forhånd eller i tube)
- Bagplade
Figure 3.1: All components included in the Xilence Performance C CPU Cooler XC032 package.
4. Opsætning og installation
Follow these general steps for installing your Xilence Performance C CPU Cooler. Specific steps may vary slightly depending on your motherboard and PC case.
- Forbered bundkortet: Place the motherboard on a non-conductive surface. If a CPU is already installed, ensure it is properly seated in the socket.
- Monter bagpladen: Position the included backplate on the rear side of the motherboard, aligning its holes with the CPU cooler mounting holes around the CPU socket. This cooler is compatible with Intel sockets 1150, 1151, 1155, and 1156.
Figure 4.1: CPU Cooler with separate backplate.
- Apply Thermal Paste (if not pre-applied): If your cooler does not have thermal paste pre-applied to its base, apply a small amount (pea-sized dot) to the center of the CPU's integrated heat spreader (IHS).
- Monter køleren: Carefully place the CPU cooler onto the CPU, aligning the mounting screws with the holes in the backplate. Press down gently and evenly.
- Fastgør køleren: Tighten the four spring-loaded screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they are finger-tight. Do not overtighten. The spring mechanism ensures even pressure.
Figur 4.2: Vinklet view of the cooler showing the fan and heatsink.
- Tilslut ventilatorkablet: Locate the 4-pin PWM fan header on your motherboard (usually labeled "CPU_FAN") and connect the cooler's 4-pin cable to it. Ensure the connector is fully seated.
- Endelig kontrol: Double-check all connections and ensure the cooler is securely mounted and not obstructing any other components.
5. Betjeningsvejledning
The Xilence Performance C CPU Cooler XC032 operates automatically via its PWM (Pulse Width Modulation) control. The motherboard's BIOS/UEFI or operating system software will regulate the fan speed based on the CPU temperature, ensuring optimal cooling performance and noise levels.
- Automatic Fan Control: The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed (RPM) according to the CPU's thermal load. This results in quieter operation during low-load tasks and increased cooling power when needed.
- Overvågning: You can monitor CPU temperatures and fan speeds using motherboard monitoring software or utilities provided by your operating system.
- Støjniveau: The fan is designed for quiet operation, with a typical noise level of 26.4 dB.
Figur 5.1: Øverst view of the CPU cooler fan.
6. Vedligeholdelse
Regelmæssig vedligeholdelse er med til at sikre din CPU-kølers levetid og optimale ydeevne.
- Fjernelse af støv: Periodically (e.g., every 3-6 months), use compressed air to gently blow dust out of the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during this process to prevent damage to the bearings.
- Rengøring af ventilator: If dust accumulates on the fan blades, carefully wipe them with a soft, dry cloth.
- Termisk pasta: The thermal paste typically lasts for several years. If you notice significantly higher CPU temperatures over time, consider reapplying fresh thermal paste after carefully cleaning the old paste from both the CPU and cooler base.
- Inspektion: Regularly inspect the mounting screws to ensure they remain secure.
7. Fejlfinding
Hvis du støder på problemer med din CPU-køler, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ventilatoren roterer ikke | Fan cable disconnected; Faulty fan header; Fan failure | Check fan cable connection to motherboard; Try a different fan header; Replace cooler if fan is faulty. |
| Høje CPU-temperaturer | Improper cooler mounting; Insufficient thermal paste; Dust accumulation; Poor case airflow | Re-seat cooler, ensuring even pressure; Reapply thermal paste; Clean heatsink and fan; Improve case ventilation. |
| For meget støj fra ventilatoren | Dust in fan bearings; Fan hitting cables; High fan speed due to high CPU load | Clean fan; Ensure no cables are obstructing fan blades; Check CPU load and temperatures; Adjust fan curve in BIOS/UEFI if desired. |
8. Specifikationer
Key technical specifications for the Xilence Performance C CPU Cooler XC032:
| Feature | Specifikation |
|---|---|
| Modelnummer | XC032 |
| Produktdimensioner | 3.94 x 3.94 x 3.15 tommer (10 x 10 x 8 cm) |
| Vægt | 11.46 ounce (325 gram) |
| Kompatible stikkontakter | Intel LGA 1150, 1151, 1155, 1156 |
| Kompatible enheder | Core i7/i5/i3, Pentium G9650 |
| Afkølingsmetode | Luft |
| Ventilatorens diameter | 92 mm |
| Fan Connector | 4-Pin PWM |
| Maksimal rotationshastighed | 2500 RPM |
| Luftmængde kapacitet | 44.25 CFM (75.2 M³/H) |
| Støjniveau | 26.4 dB |
| TDP (termisk designeffekt) | Op til 95 watt |
| Voltage | 12 volt |
| Materiale | Aluminium |
9. Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Xilence products typically come with a manufacturer's warranty covering defects in materials and workmanship.
- Fabrikant Webwebsted: Visit the official Xilence webwebstedet for de mest opdaterede supportressourcer, ofte stillede spørgsmål og kontaktoplysninger.
- Købsbevis: Retain your proof of purchase (receipt or invoice) as it may be required for warranty claims.
