Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECCO LED Beacon, Model 6267R. This medium profile beacon is designed for industrial and safety applications, operating within a 12-80VDC range and featuring PULSE8 flash patterns. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Sikkerhedsoplysninger
ADVARSEL: Dette produkt kan udsætte dig for kemikalier, herunder bly, som staten Californien ved kan forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.
- Afbryd altid strømmen før installation, vedligeholdelse eller fejlfinding.
- Sørg for korrekt voltage (12-80VDC) is supplied to the beacon. Incorrect voltage kan beskadige enheden.
- Mount the beacon securely to prevent vibration or detachment during operation.
- Do not look directly into the LED light source when operating, as it may cause eye strain or temporary vision impairment.
- This product is intended for professional installation and use.
Pakkens indhold
Kontroller, at alle varer er til stede og ubeskadigede, når du åbner pakken:
- ECCO LED Beacon (Model 6267R)
- Monteringsudstyr (skruer, skiver, møtrikker)
- Instruktionsmanual (dette dokument)
Opsætning og installation
The ECCO 6267R beacon is designed for permanent mounting. Follow these steps for secure installation:
- Vælg monteringssted: Select a flat, stable surface capable of supporting the beacon's weight and resisting vibration. Ensure the location provides clear visibility of the beacon.
- Bor monteringshuller: Use the beacon's base as a template to mark and drill appropriate holes for the mounting hardware. Ensure holes are sized correctly for the provided screws.
- Secure the Beacon: Place the beacon over the drilled holes. Insert the mounting screws through the base and secure with washers and nuts from underneath. Tighten firmly but do not overtighten.
- Ledningsføring:
- Tilslut rød ledning to the positive (+) 12-80VDC power source.
- Tilslut sort ledning to the negative (-) ground.
- Sørg for, at alle forbindelser er sikre og isolerede for at forhindre kortslutninger.
- Test funktionalitet: Once wired, apply power to the beacon to verify proper operation.
Image: The ECCO LED Beacon (Model 6267R) showing its compact, medium profile design, typically mounted on a flat surface. This image illustrates the beacon's physical appearance and size.
Betjeningsvejledning
The ECCO 6267R beacon operates automatically once power is supplied. It features a single, fixed PULSE8 flash pattern.
- Tænd: Apply 12-80VDC power to the beacon. The beacon will immediately begin flashing its PULSE8 pattern.
- Sluk: Disconnect power to turn off the beacon.
- There are no user-adjustable settings or flash pattern selections on this model.
Opretholdelse
The ECCO LED Beacon 6267R requires minimal maintenance due to its durable LED design.
- Rensning: Periodically clean the outer lens with a soft, damp cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the lens.
- Inspektion: Regularly inspect the mounting hardware and wiring for any signs of loosening, corrosion, or damage. Tighten connections as needed.
- LED-levetid: LEDs have a long lifespan and typically do not require replacement. If the beacon fails to illuminate, refer to the Troubleshooting section.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Beacon does not illuminate. | Ingen strøm eller forkert voltage. Løs eller korroderet ledningsforbindelse. Beskadigede interne komponenter. | Verify power supply (12-80VDC) is active. Kontrollér alle ledningsforbindelser for tæthed og korrosion. If power and connections are good, the unit may require replacement. |
| Beacon flashes erratically or dimly. | Insufficient or fluctuating voltage. Delvis kortslutning. | Ensure stable power supply within the specified voltage rækkevidde. Inspect wiring for any damage or exposed wires that could cause a partial short. |
| Beacon makes unusual noise. | Løs montering. Problem med intern komponent. | Kontroller og spænd alt monteringsudstyr. If noise persists, the unit may have an internal fault and require replacement. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 6267R |
| Mærke | ECCO |
| Lyskildetype | Lysdiode (LED) |
| VoltagRækkevidde | 12-80VDC |
| Flashmønster | PULSE8 (Fixed) |
| Profile | Medium |
| Varens vægt | 1 pund |
| Stil | Moderne |
| Batterier medfølger | Ingen |
Garanti og support
For warranty information and technical support, please contact ECCO customer service or visit the official ECCO webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
- Fabrikant: Ecco
- Dato først tilgængelig: 10. maj 2017
- Kontakte: Refer to ECCO's official webwebstedet for de seneste kontaktoplysninger og supportressourcer.
