PDP

PDP Gaming Universal Media Remote Brugermanual

Model: 051-038-D1

1. Introduktion

The PDP Gaming Universal Media Remote for PlayStation 4 provides a convenient way to navigate and control your PS4 system and up to three additional devices. This remote utilizes Bluetooth for PS4 control and Infrared (IR) for other devices such as your TV, cable box, and audio receiver. This manual will guide you through the setup, operation, and maintenance of your new universal media remote.

2. Opsætning

2.1 Batteriinstallation

Fjernbetjeningen kræver to AAA-batterier (medfølger ikke). Følg disse trin for at installere dem:

  1. Find batteridækslet på bagsiden af ​​fjernbetjeningen.
  2. Tryk ned på tappen, og skub dækslet af.
  3. Isæt to AAA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med indikatorerne i batterirummet.
  4. Skub batteridækslet tilbage på plads, indtil det klikker sikkert.
Steps for installing AAA batteries into the remote control

Image: Visual guide for battery installation, showing opening the cover, inserting batteries, and closing the cover.

2.2 Pairing with PlayStation 4 (Bluetooth)

To control your PlayStation 4 system, the remote must be paired via Bluetooth:

  1. Sørg for, at dit PS4-system er tændt.
  2. On the PS4 system, navigate to Indstillinger > Enheder > Bluetooth-enheder.
  3. On the Universal Media Remote, press the PS4 button (located at the top left of the device buttons section). The remote's indicator light will begin to flash.
  4. The PS4 system should detect the "PDP Universal Media Remote". Select it from the list of Bluetooth devices.
  5. Follow any on-screen prompts to complete the pairing process. Once paired, the remote's indicator light will stop flashing and remain solid for a few seconds, then turn off.

2.3 Programming for Other Devices (IR)

The remote can control up to three additional devices (TV, AV Amplifier, Cable/Satellite Set-Top Box) using Infrared (IR) signals. Programming typically involves entering a code specific to your device's brand. Refer to the original manual of your TV, amplifier, or cable box for compatible IR codes, or use the remote's learning function if available.

The device buttons at the top of the remote (TV, AMP, CBL) are used to switch control to the respective device. The PWR button is a universal power button.

Diagram showing device buttons and their functions on the universal remote

Image: A diagram illustrating the device buttons (PS4, TV, AMP, CBL, PWR) and their corresponding functions for operating the PS4 system, TV, AV amplifier, or cable/satellite set-top box.

Note: Some functions of your original remote may not be controlled by this universal remote. Use the original remote, if available, to control such functions. Sometimes buttons other than described in these instructions may actually perform the function. Experiment with the remote to identify if such situations apply to your equipment.

3. Betjening

The PDP Gaming Universal Media Remote is designed for intuitive control of your entertainment system. Below is an overview of its key features and button functions.

Front view of the PDP Gaming Universal Media Remote

Image: The full layout of the PDP Gaming Universal Media Remote, showing all buttons and their positions.

3.1 Knapfunktioner ovenforview

The remote features dedicated buttons for PlayStation 4 navigation and media control, as well as universal controls for other devices.

Labeled diagram of the PDP Gaming Universal Media Remote buttons

Image: A detailed diagram highlighting the Device Buttons (PS4, TV, AMP, CBL, PWR), Soft Keys (Programmable), and SHARE & PS buttons on the remote.

3.2 Skift mellem enheder

To control a specific device, press the corresponding device button (PS4, TV, AMP, CBL) at the top of the remote. The remote will then send commands to that device until another device button is pressed.

3.3 Power Saving Feature

The remote features a power-saving mode. The PS4 Bluetooth functionality will enter a sleep state after 30 minutes of inactivity to conserve battery life. To wake the remote and re-establish connection with the PS4, simply press the PS button. The IR functionality for other devices remains active.

4. Vedligeholdelse

4.1 Udskiftning af batteri

When the remote's performance degrades or it stops responding, it's likely time to replace the batteries. Follow the battery installation steps outlined in Section 2.1. Always use fresh AAA alkaline batteries for optimal performance.

4.2 Rengøring

To clean the remote, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

5. Fejlfinding

ProblemMulig årsag/løsning
Remote not responding to PS4.
  • Batteries are low or dead. Replace with fresh AAA batteries.
  • Remote is in power-saving mode. Press the PS knappen for at vække den.
  • Remote is not paired with PS4. Re-pair the remote following steps in Section 2.2.
  • Ensure no obstructions are between the remote and the PS4.
Remote not controlling TV/AMP/CBL.
  • Ensure the correct device button (TV, AMP, CBL) is selected.
  • Remote is not programmed for the device. Re-program using the correct IR code.
  • Ensure no obstructions are between the remote and the device's IR receiver.
  • Some functions may not be compatible. Use the original remote for those specific functions.
Buttons not working as expected in certain apps.
  • Some applications may map functions to different buttons. Experiment with various buttons on the remote to find the correct function.
  • Consider using the remote's learning function for specific commands if supported.

6. Specifikationer

Dimensions of the PDP Gaming Universal Media Remote

Image: The remote shown with its approximate dimensions in inches and centimeters.

7. Garanti og support

For warranty information or technical support regarding your PDP Gaming Universal Media Remote, please visit the official PDP webwebstedet eller kontakt deres kundesupport direkte. Gem dit købsbevis til eventuelle garantikrav.

Official PDP Webwebsted: www.pdp.com

Relaterede dokumenter -

Preview PDP LVL50 trådløst stereo gamingheadset til PlayStation 5 & 4 - Lynstartguide
Officiel hurtigstartguide til PDP LVL50 trådløst stereogamingheadset. Lær, hvordan du konfigurerer, parrer, oplader og bruger lyd- og mikrofonindstillinger til PlayStation 5 og PlayStation 4. Indeholder oplysninger om garanti og overholdelse af regler.
Preview PDP LVL40 Kablet Stereo Gaming Headset til PlayStation Lynstartguide
Lynstartguide og information om begrænset garanti til PDP LVL40 Wired Stereo Gaming Headset, kompatibelt med PlayStation 5 og PlayStation 4.
Preview PDP Afterglow Wave Dual Charger – hurtigstartguide til PlayStation 5 og 4
Denne hurtigstartguide indeholder instruktioner til opsætning og brug af PDP Afterglow Wave Dual Charger til PlayStation 5- og PlayStation 4-konsoller, herunder samling, opladning, belysningsfunktioner og fejlfinding.
Preview RIFFMASTER Trådløs Guitar Controller – Lynstartguide til PlayStation 5 og 4
Kom hurtigt i gang med PDP RIFFMASTER trådløs guitarcontroller til PlayStation 5 og PlayStation 4. Denne vejledning dækker samling, tilslutning, funktioner og opladning.
Preview PDP LVL50 Kablet Stereo Gaming Headset Lynstartguide
Kom godt i gang med dit PDP LVL50 Wired Stereo Gaming Headset til PlayStation 4 & 5. Denne vejledning dækker opsætning, lydstyring, mikrofonlydafbrydelse og garantioplysninger.
Preview PDP AIRLITE kablet headset til Nintendo Switch: Hurtigstartguide
Kom hurtigt i gang med PDP AIRLITE Wired Headset til Nintendo Switch. Denne guide dækker den indledende opsætning, tilslutning af headsettet, mikrofon-mute, lydkontroller og garantioplysninger.