Philips Meranti 2-Spot Metal Lamp Instruktionsmanual

1. Introduktion

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Philips Meranti 2-Spot Metal Lamp. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for indoor use only and requires two GU10 LED bulbs (not included).

Figure 1: Philips Meranti 2-Spot Metal Lamp, visasing its bronze metal finish and two adjustable spotlights.

2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: Always disconnect the power supply at the main circuit breaker before installation, maintenance, or bulb replacement.
• Professionel installation: Installation should be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations.
• Voltage: Sørg for, at forsyningen voltage matches the fixture's requirements (220-240V).
• Pære type: Use only GU10 LED bulbs. Do not exceed the maximum wattage of 35W per spot.
• Varme: Bulbs can become hot during operation. Allow them to cool before handling.
• Miljø: This fixture is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in damp eller våde steder.

3. Pakkens indhold

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, do not attempt to install the fixture and contact your retailer.

• Philips Meranti 2-Spot Metal Lamp fixture (1 unit)
• Monteringsbeslag
• Monteringsudstyr (skruer, vægdyvler)
• Instruktionsmanual

Note: GU10 LED bulbs are ikke inkluderet og skal købes separat.

4. Opsætning og installation

4.1 Nødvendigt værktøj

• Skruetrækker (Phillips hoved)
• Boremaskine og borehoveder (egnet til vægdyvler)
• Afisoleringstænger
• Voltage tester
• Blyant

4.2 Forinstallation

1. Afbryd strømmen: Turn off the electricity at the main circuit breaker for the area where the lamp will be installed. Verify power is off using a voltage tester.
2. Vælg placering: Select a suitable mounting location on a ceiling or wall. Ensure the surface can safely support the fixture's weight and that there are no hidden electrical wires or pipes.

4.3 Montering af armaturet

1. Fastgør monteringsbeslag: Use the provided mounting bracket as a template to mark the drill holes on the ceiling or wall.
2. Bore huller: Drill holes at the marked positions. Insert the provided wall plugs if installing into drywall or masonry.
3. Sikkert beslag: Fastgør monteringsbeslaget til overfladen med de medfølgende skruer.
4. Ledningsføring: Tilslut husholdningsledningerne til stikkontakten.amp's terminals. Typically, connect the live (L) wire to the terminal marked 'L', the neutral (N) wire to the terminal marked 'N', and the ground (E) wire to the terminal marked with the ground symbol. Ensure all connections are tight and secure.
5. Fastgør armatur: Juster forsigtigt lamp fixture with the mounting bracket and secure it using the screws provided.

4.4 Montering af pære

1. Indsæt pærer: Gently insert two GU10 LED bulbs (not included) into the lamp holders. Align the two pins of the bulb with the slots in the lamp holder.
2. Sikre pærer: Push the bulb in and twist clockwise until it is securely seated.

Figure 2: Technical drawing showing the dimensions of the Philips Meranti 2-Spot Metal Lamp (dimensions in mm).

5. Betjeningsvejledning

1. Gendan strøm: Når installationen er færdig, skal strømmen genoprettes ved hovedafbryderen.
2. Tænd/sluk: Betjen lamp using your standard wall switch.
3. Dæmpningsfunktion: If you have installed compatible dimmable GU10 LED bulbs and connected the fixture to a compatible dimmer switch, you can adjust the light intensity.
4. Adjust Spotlights: The two spotlights are adjustable. Gently pivot each spot to direct the light beam to your desired area.

6. Vedligeholdelse

6.1 Rengøring

1. Afbryd strømmen: Always disconnect the power supply before cleaning the fixture.
2. Rengøring: Wipe the fixture with a soft, dry, lint-free cloth.
3. Undgå kemikalier: Do not use abrasive cleaners, solvents, or polishing agents, as these can damage the finish.

6.2 Udskiftning af pære

1. Afbryd strømmen: Turn off the electricity at the main circuit breaker.
2. Lad afkøle: Lad den gamle pære køle helt af, før du rører ved den.
3. Fjern gammel pære: Gently push the GU10 bulb in and twist counter-clockwise to remove it from the lamp holder.
4. Indsæt ny pære: Insert a new GU10 LED bulb (max 35W) by aligning the pins with the slots, pushing in, and twisting clockwise until secure.
5. Gendan strøm: Genopret strømmen ved hovedafbryderen.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

Philips products are designed and manufactured to high-quality standards. For detailed warranty information, technical support, or to find authorized service centers, please visit the official Philips webwebsted (www.philips.com) or contact your local Philips customer service representative. Please have your model number (915005222201) available when seeking support.