Mr Beams MB360XT Wireless Motion Sensing LED Spotlight

1. Introduktion

The Mr Beams MB360XT Wireless Motion Sensing LED Spotlight provides bright, reliable, and convenient outdoor lighting. Designed for ease of use and durability, this battery-operated spotlight enhances security and visibility around your home or property without the need for complex wiring.

Figure 1.1: Two Mr Beams MB360XT Wireless Motion Sensing LED Spotlights.

Nøglefunktioner:

• 200 Lumen lysstyrke: Delivers powerful illumination for outdoor security.
• Bred dækning: Unique reflective face spreads light for a broader area.
• Weatherproof Design (IPX6): Built to withstand various outdoor conditions.
• Bevægelse aktiveret: Automatically turns on when motion is detected within a 120° angle and up to 30 feet.
• Automatisk slukning: Conserves battery life by turning off after 20 seconds of no motion.
• Lyssensor: Prevents activation during daylight hours, further extending battery life.
• Trådløs og nem installation: No wiring required, allowing for quick setup in under 5 minutes.

2. Opsætning og installation

2.1 Udpakning og indhold

Before beginning installation, ensure all components are present. Your package should include:

• Mr Beams MB360XT LED Spotlight(s)
• Monteringsudstyr (skruer og ankre)
• Brugermanual

2.2 Batteriinstallation

The MB360XT spotlight requires 3 D-cell batteries (not included). For optimal performance and battery life, use high-quality alkaline batteries.

1. Locate the battery compartment on the back of the spotlight unit.
2. Twist the battery cover counter-clockwise to unlock and remove it.
3. Isæt 3 D-cellebatterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
4. Replace the battery cover and twist clockwise to lock it securely.

Figur 2.1: Forside view of the spotlight, showing the LED and motion sensor.

2.3 Valg af monteringssted

Choose a mounting location that provides the desired coverage area and allows the motion sensor to detect activity effectively. Ideal locations include walls, eaves, or other flat surfaces. Consider the following:

• Højde: Mount the spotlight at a height that allows for optimal motion detection and light spread.
• Forhindringer: Ensure there are no large obstructions (trees, bushes, walls) that could block the motion sensor's field of view or the light beam.
• Vejrbeskyttelse: While weatherproof, mounting under an eave or overhang can offer additional protection and prolong product life.

2.4 Montering af spotlighten

Installation is quick and requires no electrical wiring. You will need a drill and a screwdriver.

1. Separate the spotlight unit from its mounting base by loosening the small screw at the base and sliding the unit off.
2. Hold the mounting base against the desired surface and mark the three screw hole locations.
3. Drill pilot holes at the marked locations. If mounting into drywall or masonry, insert the provided wall anchors.
4. Fastgør monteringsbasen til overfladen med de medfølgende skruer.
5. Align the spotlight unit with the mounted base and slide it back into place. Tighten the small screw to secure the unit to the base.
6. Adjust the angle of the spotlight to direct the light beam as needed.

Figure 2.2: Attaching the spotlight unit to the mounted base.

3. Betjeningsvejledning

The Mr Beams MB360XT spotlight is designed for automatic operation. Once batteries are installed and the unit is mounted, it will function without further intervention.

3.1 Automatisk drift

• Bevægelsesdetektion: The integrated motion sensor will detect movement within its 120° detection angle and up to 30 feet away.
• Lyssensor: The spotlight will only activate when it detects motion AND the ambient light levels are low (e.g., at dusk or night). It will not turn on during daylight hours, conserving battery power.
• Automatisk sluk: Once activated, the light will remain on for approximately 20 seconds. If no further motion is detected within this period, the light will automatically turn off. If motion continues, the light will remain on until motion ceases.

Figure 3.1: Spotlight illuminating an outdoor area at night.

Figure 3.2: Spotlight providing illumination for entryways.

3.2 Battery Life Expectancy

With average use of 8-10 activations per day, you can expect approximately 1 year of light from each set of batteries. Battery life may vary based on usage frequency, battery quality, and environmental conditions (e.g., extreme temperatures).

4. Vedligeholdelse

4.1 Udskiftning af batteri

When the light output becomes dim or the spotlight stops activating, it is time to replace the batteries. Follow the steps outlined in Section 2.2 Battery Installation to replace the 3 D-cell batteries.

4.2 Rengøring

To maintain optimal performance, periodically clean the lens and motion sensor window with a soft, damp klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige enheden.

4.3 Vejrbestandighed

The MB360XT spotlight is rated IPX6 weatherproof, meaning it is protected against powerful jets of water. While designed for outdoor use, extreme weather conditions (e.g., prolonged heavy rain, snow, or ice accumulation) may temporarily affect performance or reduce battery life. Ensure the battery compartment is always securely sealed.

5. Fejlfinding

6. Specifikationer

7. Garanti og support

7.1 Produktgaranti

All Mr Beams products are guaranteed against defects in workmanship and materials for 1 år fra købsdatoen. This warranty covers normal use and service. For full terms and conditions, please refer to the official Mr Beams warranty policy, typically found on their website or included with your product documentation.

7.2 Kundesupport

For additional information, technical assistance, or warranty claims, please visit the official Mr Beams product support page. You can often find FAQs, troubleshooting guides, and contact information for customer service there.

Online support: Visit Mr Beams Support Page