Produkt overview
The CORNING GOSSELIN LC150A-05 Square HDPE Storage Bottle is designed for efficient sampling and storage of various substances. Made from High-Density Polyethylene (HDPE), these bottles offer durability and chemical resistance. Their square design optimizes shelf space, providing 13% to 20% more storage efficiency compared to traditional round bottles. This particular model comes with a 37mm red screw cap and is sterile, ensuring suitability for sensitive applications.
Image: A clear, square-shaped HDPE storage bottle with a red screw cap. The bottle features volume graduations on its side, indicating measurements up to 1.5 liters.
Nøglefunktioner
- Materiale: High-Density Polyethylene (HDPE) for bottle, Polypropylene (PP) for cap.
- Kapacitet: 150 ml.
- Kasket: 37mm Red Screw Cap, ensuring a secure seal.
- Sterilitet: Sterile SAL 10-3, suitable for sensitive laboratory applications.
- Design: Square shape for optimized storage space.
- Tilgængelighed: Large neck opening for easier liquid transfer.
- Graderinger: This 150 mL model is not graduated.
Note: While other sizes in this bottle series may be graduated, the 150 mL model (LC150A-05) is typically not graduated according to product specifications.
Opsætning og forberedelse
- Inspektion: Upon receiving the bottles, inspect the packaging and individual bottles for any signs of damage or compromise to sterility. Do not use if the packaging is damaged or the seal is broken.
- Opbevaring: Store bottles in a clean, dry environment away from direct sunlight and extreme temperatures.
- Tjek før brug: Before use, ensure the bottle and cap are free from any particulate matter or defects.
- Sterilitet: These bottles are supplied sterile. Do not re-sterilize or reuse if sterility is critical for your application, as this may compromise the material integrity or sterility level.
Betjeningsvejledning
- Fyldning: Carefully pour the liquid, semi-liquid, or solid substance into the bottle. The large neck opening facilitates easy filling.
- Capping: Securely screw on the red cap until hand-tight. Avoid overtightening, which can damage the cap or bottle threads.
- Opbevaring: Place the filled bottle in the desired storage location. The square design allows for efficient use of space.
- Håndtering: Always handle bottles with care, especially when containing hazardous materials.
- Temperaturområde: Ensure the contents and storage environment are within the recommended temperature range for HDPE, typically -80°C to 120°C, though specific application temperatures may vary. Consult material compatibility charts if unsure.
Vedligeholdelse og pleje
These bottles are designed for single-use applications, especially when sterility is paramount. Therefore, routine maintenance and cleaning for reuse are generally not recommended.
- Bortskaffelse: Dispose of bottles and their contents according to local regulations and laboratory safety protocols after use.
- Cleaning (if applicable for non-sterile, non-critical use): If bottles are used for non-critical applications where reuse is considered, they can be cleaned with mild detergents and rinsed thoroughly with distilled water. However, this may compromise the original sterility and material integrity over time.
- Inspection for Reuse: Before any potential reuse, thoroughly inspect the bottle for cracks, discoloration, or any signs of degradation. Do not reuse if any damage is observed.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Leaking from cap | Cap not tightened sufficiently, damaged cap/bottle threads, or incompatible contents. | Ensure cap is hand-tight. Inspect cap and bottle threads for damage; replace if necessary. Verify chemical compatibility with HDPE. |
| Bottle deformation/cracking | Exposure to extreme temperatures, incompatible chemicals, or physical stress. | Ensure contents and storage conditions are within HDPE's temperature and chemical compatibility limits. Avoid dropping or applying excessive pressure. Dispose of damaged bottles. |
| Sterility compromised | Packaging seal broken, improper handling, or reuse after initial sterile use. | Do not use bottles if packaging is compromised. Handle with aseptic technique if maintaining sterility. Do not reuse for sterile applications. |
Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | Corning / Gosselin |
| Produkt model | LC150A-05 |
| Varemodelnummer | 1185L49CS |
| Flaske materiale | Højdensitetspolyethylen (HDPE) |
| Hættemateriale | Polypropylen (PP) |
| Kapacitet | 150 ml |
| Hættestørrelse | 37mm Screw Cap |
| Farve | Natural (bottle), Red (cap) |
| Sterilitet | Sterile SAL 10-3 |
| Flaske type | Square, Disposable |
| Pakkemængde | Pakke med 300 |
| Pakkedimensioner | 3.94 x 3.94 x 3.94 tommer (ca.) |
