ASHCROFT 1009AWL Pressure Gauge User Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your ASHCROFT 1009AWL Pressure Gauge. This general-purpose pressure gauge is designed for reliable measurement within a 0 to 400 psi range, featuring a 2-1/2 inch dial and liquid-filled construction for enhanced performance and durability.

Læs venligst denne manual grundigt, inden du bruger produktet, for at sikre sikker og effektiv drift.

2. Sikkerhedsoplysninger

• Trykgrænser: Do not exceed the maximum rated pressure of 400 psi. Over-pressurization can cause gauge failure and potential injury.
• Installation: Ensure the gauge is installed by qualified personnel using appropriate tools and sealing methods.
• Systemkompatibilitet: Verify that the gauge's wetted parts (Brass/Bronze) are compatible with the process media to prevent corrosion or damage.
• Temperaturgrænser: Operate the gauge within the specified temperature range of -20°F to 150°F. Extreme temperatures can affect accuracy and lifespan.
• Håndtering: Avoid dropping or subjecting the gauge to severe impact, as this can damage internal components.

3. Produktet er slutview og komponenter

The ASHCROFT 1009AWL Pressure Gauge is constructed for durability and accurate readings. Key components include:

• Urskive: 2-1/2 inch diameter, clearly marked with 0-400 psi scale.
• Pointer: Indicates the measured pressure.
• Sag: Made from 304 Stainless Steel for corrosion resistance.
• Linse: Polycarbonate material for visibility and protection.
• Forbindelse: 1/4 inch MNPT (Male National Pipe Taper) located at the bottom of the gauge.
• Befugtede dele: Brass/Bronze construction ensures compatibility with various media.
• Liquid Filling: Glycerin-filled for dampening pulsation and vibration, enhancing pointer stability and extending gauge life.

Figur 1: ASHCROFT 1009AWL Pressure Gauge. This image displays the front view of the pressure gauge, showing the 0-400 psi dial, the ASHCROFT brand logo, and the bottom-mounted 1/4 inch MNPT connection.

4. Installation og opsætning

1. Inspect Gauge: Before installation, visually inspect the gauge for any signs of damage. Do not install a damaged gauge.
2. Forbered forbindelse: Sørg for, at systemets tilslutningspunkt er rent og fri for snavs.
3. Påfør tætningsmiddel: Apply an appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1/4 inch MNPT threads of the gauge connection. Ensure sealant does not enter the gauge or system.
4. Thread Gauge: Carefully thread the gauge into the system connection by hand until finger-tight.
5. Stramme: Using a wrench on the wrench flats of the gauge connection (not the case), tighten the gauge until secure. Avoid over-tightening, which can damage the threads or the gauge.
6. Bekræft orientering: Ensure the gauge dial is oriented for easy reading.
7. Systemtryk: Slowly pressurize the system and check for leaks at the connection point.

5. Betjening

The ASHCROFT 1009AWL Pressure Gauge is designed for straightforward operation. Once properly installed, the gauge will continuously display the system pressure.

• Aflæsning af måleren: Observe the pointer's position on the dial. The primary scale is in psi (pounds per square inch), ranging from 0 to 400. The smallest graduation is 10 psi.
• Driftsbetingelser: Ensure the operating environment and process media remain within the gauge's specified temperature range of -20°F to 150°F.
• Nøjagtighed: The gauge provides readings with an accuracy of +/-1.50% of full scale.
• Pulsering: The glycerin filling helps to dampen pointer fluctuation in systems with pulsation or vibration, providing a more stable reading.

6. Vedligeholdelse

Regular maintenance ensures the longevity and accuracy of your pressure gauge.

• Rutinemæssig inspektion: Periodically inspect the gauge for any physical damage, such as a cracked lens, bent pointer, or corroded case.
• Renhed: Keep the gauge lens clean to ensure clear visibility of the dial. Use a soft, damp klud til rengøring; undgå slibende rengøringsmidler.
• Genkalibrering: While ASHCROFT gauges are built for accuracy, prolonged use or exposure to harsh conditions may necessitate recalibration. Consult a qualified technician for recalibration services if accuracy is critical and suspected to be compromised.
• Liquid Fill: The glycerin fill is sealed. If the liquid level appears significantly low or cloudy, the gauge may require replacement or professional servicing.

7. Fejlfinding

Below are common issues and potential solutions for the ASHCROFT 1009AWL Pressure Gauge:

• No Reading / Pointer Stuck:
  • Verify that the system is pressurized.
  • Check for blockages in the connection line to the gauge.
  • Inspect for physical damage to the gauge.
• Unøjagtig aflæsning:
  • Ensure the gauge is operating within its specified temperature range.
  • Confirm the gauge's range is appropriate for the system pressure.
  • Consider professional recalibration if accuracy is critical and other factors are ruled out.
• Lækage ved tilslutning:
  • Aflast systemet.
  • Re-apply thread sealant and re-tighten the connection.
  • Inspect threads for damage.
• Liquid Fill Discoloration/Loss:
  • This may indicate a seal compromise or internal issue. The gauge may need replacement.

8. Tekniske specifikationer

9. Garantioplysninger

The ASHCROFT 1009AWL Pressure Gauge comes with a 5 års producentgaranti. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the official ASHCROFT warranty statement or contact ASHCROFT customer support.

10. Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ASHCROFT customer support directly. Visit the official ASHCROFT webwebsted for kontaktoplysninger og yderligere ressourcer.

ASHCROFT Official Webwebsted: www.ashcroft.com