FORA Painless Design Adjustable Lancing Device User Manual

1. Introduktion

Thank you for choosing the FORA Painless Design Adjustable Lancing Device. This device is designed to assist in obtaining blood samples for glucose monitoring with enhanced comfort and safety. Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

Nøglefunktioner:

• Adjustable Depth Settings: Offers 6 dial-in-click depth settings for personalized comfort based on skin type.
• Safe Lancet Ejection: Features a built-in ejector mechanism for hygienic removal of used lancets without direct contact.
• Alternativt webstedstest: Includes a clear end cap for testing on alternative sites such as the forearm or palm.
• Kompatibilitet: Compatible with most standard lancets (lancets sold separately).

2. Sikkerhedsoplysninger

Always follow basic safety precautions when using this lancing device to reduce the risk of injury or infection.

• For Single Patient Use Only: This lancing device is intended for use by a single individual. Sharing the device can lead to the transmission of bloodborne pathogens.
• Use New Lancets: Always use a new, sterile lancet for each test. Reusing lancets can cause infection and dull the tip, leading to increased pain.
• Korrekt bortskaffelse: Dispose of used lancets in an approved sharps container immediately after use.
• Opbevares utilgængeligt for børn: Store the lancing device and lancets safely away from children.
• Consult Healthcare Professional: Udsagn vedrørende kosttilskud er ikke blevet evalueret af FDA og er ikke beregnet til at diagnosticere, behandle, helbrede eller forebygge nogen sygdom eller helbredstilstand. Rådfør dig altid med en sundhedsperson for lægehjælp.

3. Produktet er slutview

Familiarize yourself with the components of your FORA Lancing Device:

Figur 3.1: Components of the FORA Lancing Device. This diagram illustrates the main parts: the protective cap, the depth indicator for setting penetration level, the ejector mechanism for safe lancet removal, and the release button to activate the lancing action.

• Kasket: The protective cover that twists off to access the lancet chamber.
• Dybdeindikator: A dial with 6 settings to adjust the lancet penetration depth.
• Udkaster: A mechanism to safely remove used lancets without direct handling.
• Udløser knap: The button pressed to activate the lancing action.
• Lancing Device Body: The main housing of the device.

4. Opsætning

4.1 Inserting a Lancet

1. Unscrew the cap from the lancing device.
2. Insert a new, sterile lancet firmly into the lancet holder.
3. Twist off the protective cap from the lancet. Retain this cap for safe disposal later.
4. Replace the lancing device cap by screwing it back on.

4.2 Adjusting Penetration Depth

The lancing device features 6 adjustable depth settings. Rotate the cap to select the desired depth. A higher number indicates a deeper penetration.

• Indstillinger 1-2: For soft or thin skin.
• Indstillinger 3-4: For average skin.
• Indstillinger 5-6: For thick or calloused skin.

Figur 4.1: Steps for preparing and using the lancing device. This image demonstrates selecting the penetration depth, cocking the device, and performing a finger prick.

5. Betjeningsvejledning

5.1 Performing a Blood Sample (Fingerstick)

1. Wash your hands thoroughly with soap and warm water, then dry them completely.
2. Ensure a new lancet is inserted and the depth setting is appropriate for your skin type (refer to Section 4.2).
3. Pull the cocking control back until it clicks. The device is now armed.
4. Placer fingerprikkeren fast mod siden af ​​din fingerspids.
5. Press the release button to activate the lancet.
6. Gently massage your finger from the base towards the tip to form a blood drop. Do not squeeze excessively.
7. Apply the blood drop to your glucose meter test strip as instructed by your meter's manual.

5.2 Alternative Site Testing (AST)

The FORA Lancing Device includes a clear alternate site end cap for testing on areas other than the fingertip, such as the forearm or palm. Consult your healthcare professional before performing AST, as results from alternative sites may differ from fingertip results, especially during periods of rapid glucose change.

1. Remove the standard cap and replace it with the clear AST cap.
2. Select a suitable depth setting (AST generally requires a deeper setting due to thicker skin).
3. Pull the cocking control back until it clicks.
4. Press the clear AST cap firmly against the chosen alternative site (e.g., forearm or palm) and hold for a few seconds to create a vacuum.
5. Tryk på udløserknappen.
6. Gently massage the area to form a blood drop.
7. Apply the blood drop to your glucose meter test strip.

5.3 Safely Disposing of a Used Lancet

Proper disposal of used lancets is crucial to prevent accidental needle sticks and the spread of infection.

Figur 5.1: Steps for safe lancet disposal. This image shows how to cap the lancet and then use the ejector mechanism to remove it from the device.

1. Skru hætten til fingerprikkeren af.
2. Carefully place the protective cap (removed in Section 4.1) back onto the used lancet, ensuring the needle is fully covered. Alternatively, if your lancets come with a protective disk, push the exposed tip into the disk on a hard surface.
3. Slide the ejector forward to release the capped lancet into an approved sharps container.
4. Replace the lancing device cap.

6. Vedligeholdelse

6.1 Cleaning the Lancing Device

• Clean the exterior of the lancing device regularly with a soft cloth dampafsluttes med mild sæbe og vand.
• Do not immerse the device in water or any cleaning solution.
• Sørg for, at enheden er helt tør før opbevaring eller næste brug.

6.2 Opbevaring

• Store the lancing device in a clean, dry place at room temperature.
• Avoid extreme temperatures, direct sunlight, and high humidity.
• Keep the device and all accessories out of reach of children and pets.

7. Fejlfinding

If you encounter issues with your lancing device, refer to the table below for common problems and solutions.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or to purchase accessories, please contact FORA customer service or visit the official FORA webwebsted.

You can find more information about FORA products and support at the FORA Store on Amazon.