NETGEAR ReadyNAS RR3312G0 2U 12-Bay rackmonteret NAS brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, configuration, operation, and maintenance of your NETGEAR ReadyNAS RR3312G0 2U 12-Bay Rack Mount NAS. Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its performance and longevity.

The ReadyNAS RR3312G0 is a high-performance network-attached storage system designed for business environments, featuring a 5th generation Intel Xeon Enterprise Server Processor, 16GB DDR4 ECC RAM, and advanced data protection capabilities.

2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: Ensure the device is connected to a grounded power outlet. Do not overload power strips or extension cords.
• Ventilation: Maintain adequate airflow around the NAS. Do not block ventilation openings. Install in a well-ventilated rack.
• Miljøforhold: Operate the device within specified temperature and humidity ranges. Avoid direct sunlight, heat sources, and excessive moisture.
• Service: Overlad al service til kvalificeret servicepersonale. Forsøg ikke selv at åbne eller reparere enheden.
• Rack montering: When rack mounting, ensure the rack is stable and properly secured. Install the heaviest equipment at the bottom of the rack.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• NETGEAR ReadyNAS RR3312G0 Unit
• Rack mounting rails and hardware
• Ethernet kabler
• Power cords (x2 for redundant power supplies)
• Hurtig installationsvejledning

4. Hardware overview

4.1 Frontpanel

• Drive Bays (1-12): Hot-swappable bays for 3.5-inch or 2.5-inch hard drives or solid-state drives.
• Power knap: Press to power on or off the NAS.
• LED-indikatorer: Provide status information for power, network activity, and drive health.

4.2 Bagpanel

• Power Supply Units (PSU1, PSU2): Two redundant, hot-swappable power supplies.
• LAN-porte (1-4): Four Gigabit Ethernet ports for network connectivity, supporting link aggregation and failover.
• USB 3.0-porte: Two ports for connecting external USB devices.
• eSATA Ports: Two ports for connecting eSATA expansion enclosures.
• Konsolport: For direct console access (if applicable).

5. Opsætning

5.1 Rackinstallation

1. Attach the provided rack rails to your standard 19-inch server rack.
2. Carefully slide the ReadyNAS RR3312G0 unit onto the installed rails until it clicks into place.
3. Secure the unit to the rack using the front mounting screws.

5.2 Installation af drev

The ReadyNAS RR3312G0 supports up to twelve 3.5-inch or 2.5-inch SATA hard drives or SSDs. Drives are not included and must be purchased separately.

1. Open the latch on an empty drive tray.
2. Mount your hard drive or SSD into the drive tray using the provided screws.
3. Slide the drive tray into an empty drive bay until it clicks securely into place.
4. Gentag for alle ønskede drev.

For optimal performance and data protection, it is recommended to use drives of the same capacity and type.

5.3 Første opstart og netværksforbindelse

1. Connect one or more Ethernet cables from the LAN ports on the rear panel to your network switch or router.
2. Connect the power cords from the power supply units to grounded electrical outlets.
3. Press the power button on the front panel. The system will begin its boot sequence.

5.4 Initial Configuration (ReadyCLOUD)

The ReadyNAS RR3312G0 is managed via the NETGEAR ReadyCLOUD portal or the local web interface.

1. From a computer connected to the same network, open a web browser og naviger til readycloud.netgear.com.
2. Follow the on-screen instructions to discover and set up your ReadyNAS. This typically involves creating a ReadyCLOUD account (if you don't have one) and assigning a name to your NAS.
3. The setup wizard will guide you through creating your initial storage volume, which will automatically configure X-RAID for data protection.
4. Once the initial setup is complete, you can access the full ReadyNAS OS web administration interface for advanced settings.

6. Operating the ReadyNAS

6.1 Adgang til Web Administrationsgrænseflade

After initial setup, you can access the ReadyNAS OS web interface directly by entering the NAS's IP address in your web browser, or through the ReadyCLOUD portal.

• Dashboard: Giver en overview of system status, volume health, and network activity.
• Aktier: Manage network shares (SMB/CIFS, NFS, AFP, FTP) for file adgang.
• Mængder: Monitor and manage storage volumes, including X-RAID configuration and capacity.
• Users & Groups: Create and manage user accounts and access permissions.
• Netværk: Configure network settings, including IP addresses, link aggregation, and VLANs.

6.2 Data Protection Features

• X-RAID: NETGEAR's patented automatic volume expansion technology, providing data redundancy and simplified storage management.
• Unlimited Snapshots: Create point-in-time copies of your data for easy recovery from accidental deletions or ransomware attacks.
• Bit Rot Protection: Automatically detects and repairs silent data corruption using the Btrfs file system.
• Anti-virus: Integrated anti-virus scanning to protect against malware.
• Offsite Replication: Replicate data to another ReadyNAS or cloud service for disaster recovery.

6.3 Netværkskonfiguration

The four Gigabit Ethernet ports can be configured for various network setups:

• Standard: Each port operates independently.
• Link Aggregation (LAG): Combine multiple ports for increased bandwidth and failover. Supports 802.3ad (LACP) and other modes.
• Failover: Provides redundancy by automatically switching to a secondary port if the primary fails.
• VLAN'er: Segment your network for improved security and management.

7. Vedligeholdelse

7.1 firmwareopdateringer

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Updates can be managed through the ReadyNAS OS web interface.

1. Naviger til System > Update i web interface.
2. Se efter tilgængelige opdateringer, og følg vejledningen for at installere dem.
3. The system will reboot after a successful update.

7.2 Udskiftning af drev

The ReadyNAS RR3312G0 supports hot-swapping of drives. If a drive fails, the X-RAID volume will enter a degraded state. Replace the failed drive as soon as possible.

1. Identify the failed drive via the LED indicator on the drive bay or through the ReadyNAS OS web interface.
2. Carefully pull the failed drive tray out of the bay.
3. Remove the failed drive from the tray and install a new, compatible drive.
4. Slide the new drive tray into the empty bay until it clicks into place.
5. The ReadyNAS will automatically begin rebuilding the volume with the new drive. Monitor the progress through the web interface.

7.3 Rengøring

Periodically clean the exterior of the NAS with a soft, dry cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners directly on the device.

8. Fejlfinding

• NAS Not Powering On:
  • Verify power cords are securely connected to both the NAS and the power outlets.
  • Ensure power outlets are functional.
  • Check if the power supply units are properly seated.
• NAS Not Accessible on Network:
  • Confirm Ethernet cables are securely connected to the NAS and the network switch/router.
  • Kontroller status for netværksswitch/router.
  • Ensure the computer is on the same network segment as the NAS.
  • Try accessing via IP address instead of hostname.
  • Restart the NAS and network equipment.
• Drive Failure Indication:
  • A blinking or red LED on a drive bay indicates a failed or failing drive.
  • Replace the drive as described in Section 7.2.
  • The system will automatically rebuild the volume.
• Langsom ydeevne:
  • Check network cable quality and switch speed.
  • Monitor CPU and memory usage through the ReadyNAS OS web interface.
  • Ensure sufficient free space on the volume.
  • Verify that no intensive background tasks (e.g., volume scrub, anti-virus scan) are running.

For further assistance, refer to the NETGEAR support webwebstedet eller kontakt teknisk support.

9. Specifikationer

10. Garanti og support

For detailed warranty information, please refer to the warranty card included with your product or visit the official NETGEAR website. NETGEAR provides technical support and resources to assist you with your ReadyNAS RR3312G0.

• Online support: Besøg www.netgear.com/support til dokumentation, ofte stillede spørgsmål og fællesskabsfora.
• Teknisk support: Contact NETGEAR technical support for assistance with product issues. Contact details are available on the support webwebsted.
• Produktregistrering: Registrer dit produkt på www.netgear.com/mynetgear to receive product updates and support notifications.