Produkt overview
The KFD 29V Recliner Power Supply Adapter is designed to provide reliable power to various electric recliners and lift chairs. This adapter serves as a direct replacement for original power supplies, ensuring your furniture operates smoothly.
It is compatible with a wide range of brands and models, including those from Changzhou Kaidi Electrical, OKIN, IKOCO, Tranquil Ease Limoss, Lazy boy, Flexsteel Lift Chair, and Pride Mobility. The adapter features robust safety protections to ensure safe and efficient operation.

Image: The KFD 29V Recliner Power Supply Adapter, showing the main unit and connected power cords.
Opsætningsinstruktioner
- Bekræft kompatibilitet: Before connecting, ensure the output voltage (29V) and current (2A) of this adapter match the requirements of your recliner or lift chair. Also, confirm the connector type (2-pin) is compatible with your device's motor.
- Connect to Recliner: Locate the power input port on your recliner's motor. This is typically a 2-pin connector. Carefully align and insert the adapter's output plug into the recliner's input port. Ensure a secure connection.
- Tilslut til stikkontakten: Plug the AC power cord into the adapter's input port. Then, insert the other end of the AC power cord into a standard 100-240V wall outlet.
- Test drift: Once connected, test your recliner's functions to ensure it operates correctly.
Note: For some Flexsteel furniture, the two plastic bumps on the side of the adapter's plug may need to be carefully removed for a proper fit. This can be done with a utility knife if necessary.

Image: The KFD power adapter positioned next to a recliner, demonstrating a typical setup.
Betjeningsvejledning
The KFD 29V Recliner Power Supply Adapter operates automatically once connected to a power source and your recliner. There are no user-adjustable settings on the adapter itself.
- Ensure all connections are firm before operating your recliner.
- The adapter is designed with built-in safety protections including Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your device and the power supply.

Image: Diagram illustrating the built-in safety protections of the power adapter, including surge protection, current stabilization, temperature control, and short circuit prevention.
Opretholdelse
To ensure the longevity and optimal performance of your KFD power adapter, follow these simple maintenance guidelines:
- Hold tør: Avoid exposing the adapter to moisture or liquids. Do not use it in damp miljøer.
- Rengør forsigtigt: Disconnect the adapter from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use harsh chemicals or abrasive cleaners.
- Korrekt opbevaring: Når adapteren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Kabelpleje: Avoid bending or crimping the cables excessively. Do not place heavy objects on the cables, as this can cause damage.
Fejlfinding
If you encounter issues with your KFD 29V Recliner Power Supply Adapter, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Recliner does not power on. |
|
|
| Adapteren føles varm under brug. | Normal drift. | A slight warmth is normal. If the adapter becomes excessively hot or emits a burning smell, disconnect it immediately and contact support. Ensure adequate ventilation around the adapter. |
| Adapter plug does not fit into Flexsteel furniture. | Plastic bumps on the plug. | Carefully remove the two small plastic bumps on the sides of the adapter's plug using a utility knife. This modification is sometimes necessary for Flexsteel furniture to allow the plug to seat properly. |

Image: A visual guide on how to select the correct AC adapter by verifying output power (voltage og amperage) and the DC connector type, shown with a recliner and adapter specifications.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | LAC-731-US1 |
| Input bindtage | 100-240V AC, 50/60Hz |
| Udgang Voltage | 29V DC |
| Udgangsstrøm | 2A |
| Wattage | 58W |
| Produktdimensioner | 6.2 x 4.1 x 1.8 tommer |
| Varens vægt | 12.8 ounce |
| Connector Type | 2-benet |
| Kompatible enheder | IKOCO, Kaidi, Limoss, Okin, Pride Mobility, Southern Motion, Flexsteel, Rooms To Go |
| Særlige funktioner | Over Voltage-beskyttelse (OVP), overstrømsbeskyttelse (OCP), kortslutningsbeskyttelse (SCP) |
| Inkluderede komponenter | Strømledning |
| Certificeringer | CE / FCC / RoHS certified |
Garanti og support
KFD stands behind the quality of its products. This power adapter comes with the following warranty and support:
- Garanti: 30 days free exchange and a 36-month warranty from the date of purchase.
- Kundesupport: For any questions, technical assistance, or warranty claims, please contact KFD customer support. Refer to the product packaging or the KFD official webwebsted for kontaktoplysninger.

Image: A graphic indicating a 3-year warranty and encouraging users to contact customer support.





