RCF Sub 8006-AS

RCF Sub 8006-AS Aktiv Dual 18-tommer Subwoofer Brugsanvisning

Model: Sub 8006-AS

1. Introduktion

Thank you for choosing the RCF Sub 8006-AS Active Dual 18-inch Subwoofer. This professional-grade subwoofer is designed to deliver powerful and accurate low-frequency reproduction for various sound reinforcement applications. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your RCF Sub 8006-AS. Please read this manual thoroughly before using the product.

2. Sikkerhedsoplysninger

ADVARSEL: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

3. Pakkens indhold

Verify that all items are present and in good condition upon unpacking. If any items are missing or damaged, contact your dealer immediately.

4. Produktet er slutview

The RCF Sub 8006-AS is a high-performance active subwoofer featuring dual 18-inch woofers with 4-inch voice coils, designed for robust and extended low-frequency output.

Nøglefunktioner:

Komponentidentifikation:

Front view of the RCF Sub 8006-AS subwoofer

Figur 4.1: Front view of the RCF Sub 8006-AS subwoofer, showcasing the protective grille and RCF logo. This image displays the overall robust design of the unit.

Front view of the RCF Sub 8006-AS showing dual 18-inch woofers

Figur 4.2: Front view with grille removed, revealing the dual 18-inch woofers. This illustrates the powerful speaker configuration responsible for deep bass.

Rear panel of the RCF Sub 8006-AS with controls and connections

Figur 4.3: Rear panel of the subwoofer, showing the amplifier module, input/output connectors (XLR, Powercon), and control knobs. This is where all audio and power connections are made, and settings are adjusted.

Top view of the RCF Sub 8006-AS showing handles and pole mount socket

Figur 4.4: Top view of the subwoofer, highlighting the integrated handles for transport and the pole mount socket for attaching a satellite speaker.

5. Opsætning

5.1 Placering

Proper placement is crucial for optimal sound performance and safety.

5.2 Forbindelser

Always ensure the subwoofer is powered off before making any connections.

  1. Audio Input (XLR): Connect your audio source (e.g., mixer, audio interface) to the XLR input(s) on the rear panel using high-quality XLR cables. The Sub 8006-AS supports both stereo and mono input configurations.
  2. Audio Output (XLR): Use the XLR output(s) to send the processed audio signal to full-range speakers or other subwoofers.
  3. Power Connection (Powercon): Connect the provided Powercon power cable to the Powercon inlet on the rear panel, then plug the other end into a grounded AC power outlet. Ensure the power source matches the voltage requirements specified on the unit.
  4. Bluetooth (valgfrit): For wireless audio streaming, activate Bluetooth on your source device and pair it with the Sub 8006-AS. Refer to the operating section for detailed Bluetooth pairing instructions.

5.3 Indledende tænding

Once all connections are secure:

  1. Ensure the volume/gain control on the subwoofer is set to its minimum position.
  2. Power on your audio source devices first.
  3. Flip the power switch on the RCF Sub 8006-AS to the "ON" position.
  4. Slowly increase the volume/gain on the subwoofer to the desired listening level.

6. Betjeningsvejledning

6.1 Indbyggede kontroller

The rear panel features various controls to fine-tune the subwoofer's performance. (Refer to Figure 4.3 for visual reference).

6.2 Bluetooth-forbindelse

Sådan tilslutter du en Bluetooth-enhed:

  1. Sørg for, at subwooferen er tændt.
  2. Activate Bluetooth on your source device (smartphone, tablet, etc.).
  3. Søg efter available Bluetooth devices. The subwoofer should appear as "RCF Sub 8006-AS" or similar.
  4. Select the subwoofer to pair. A confirmation sound or indicator light may signal a successful connection.
  5. Once paired, you can stream audio wirelessly to the subwoofer.

Note: Bluetooth is primarily for convenience and may not be suitable for critical professional audio applications where wired connections are preferred for stability and audio quality.

7. Vedligeholdelse

8. Fejlfinding

ProblemMulig årsagLøsning
Ingen strøm
  • Strømkabel ikke tilsluttet
  • Strømudtag ikke aktivt
  • Strømafbryder slukket
  • Ensure Powercon cable is securely connected to both subwoofer and outlet.
  • Test stikkontakten med en anden enhed.
  • Flip the power switch to "ON".
Ingen lydudgang
  • Audio input cable not connected or faulty
  • Kildeenheden afspiller ikke, eller lydstyrken er for lav
  • Subwoofer gain/volume set too low
  • Forkerte delefilterindstillinger
  • Check XLR input connections and cables.
  • Verify audio is playing from the source and its volume is adequate.
  • Increase the subwoofer's gain/volume control.
  • Adjust crossover frequency to an appropriate range (e.g., 80-120 Hz).
Forvrænget lyd
  • Indgangssignalet er for højt (clipping)
  • Subwoofer gain set too high
  • Forkert faseindstilling
  • Reducer udgangsniveauet fra din lydkilde.
  • Lower the subwoofer's gain/volume control.
  • Toggle the phase switch (0°/180°) to find the setting that provides the fullest bass.
Problemer med Bluetooth-forbindelse
  • Enheden er uden for rækkevidde
  • Subwoofer not in pairing mode
  • Interferens
  • Move the Bluetooth device closer to the subwoofer.
  • Ensure Bluetooth is active on the subwoofer (if applicable) and your device.
  • Prøv at parre enheden igen.

If the problem persists after trying these solutions, please contact RCF customer support or a qualified service technician.

9. Specifikationer

FeatureDetalje
ModelnavnSub 8006-AS
Højttaler typeAktiv subwoofer
Bashøjttaler diameterDobbelt 18 tommer
Stemmespole4 tommer
Højttaler AmplifikationstypeAktiv
Højttaler Maksimal udgangseffekt2500 watt
ForbindelsesteknologiPowercon, XLR
Trådløs kommunikationsteknologiBluetooth
LydudgangstilstandStereo, mono
KontrolmetodeTouch (Onboard Controls)
MonteringstypeTabletop Mount (with pole mount socket)
Varens vægt120 pund (ca. 54.4 kg)
Er vandtætFALSE (Not waterproof)
FabrikantRCF
ASINB01HNASAG0
Dato først tilgængelig16. januar 2015

Bemærk: Specifikationerne kan ændres uden varsel.

10. Garanti og support

10.1 Begrænset garanti

The RCF Sub 8006-AS is covered by a Begrænset garanti. The terms and conditions of this warranty are provided separately with your purchase or can be found on the official RCF website. Please retain your proof of purchase for warranty claims. This warranty typically covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

10.2 Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact RCF customer support through their official website or your authorized dealer.

Relaterede dokumenter - Sub 8006-AS

Preview RCF HDL15-AS Aktiv Flyvbar Højtydende Subwoofer Brugermanual
Denne brugermanual indeholder detaljerede oplysninger om RCF HDL15-AS Active Flyable High Power Subwoofer. Den dækker sikkerhedsforanstaltninger, produktfunktioner, tekniske specifikationer, installation, rigning og array-design til professionel lyd og touring-applikationer.
Preview RCF SUB 15-AS & SUB 18-AS Professionelle Subwoofere - Brugermanual
Brugermanual til professionelle aktive subwoofere RCF SUB 15-AS og SUB 18-AS. Indeholder detaljerede oplysninger om sikkerhedsforanstaltninger, produktbeskrivelse, betjeningselementer på bagpanelet, tilslutninger, fejlfinding, dimensioner og tekniske specifikationer.
Preview RCF HDL 6-A og HDL 12-AS brugermanual
Omfattende brugermanual til RCF HDL 6-A aktivt line array-modul og HDL 12-AS aktivt subwoofer-array-modul, der dækker opsætning, sikkerhed, rigning, software og specifikationer.
Preview RCF SUB 15-AX og SUB 18-AX Professionelle Subwoofere Brugermanual
This manual provides detailed information on the RCF SUB 15-AX and SUB 18-AX professional subwoofers, covering safety precautions, product description, rear panel features, display operation, connections, troubleshooting, and specifications. It includes guidance on proper usage, maintenance, and installation for these high-power active subwoofers.
Preview RCF HDL 30-A og HDL 38-AS brugermanual
Omfattende brugermanual til RCF HDL 30-A aktivt tovejs line array-modul og HDL 38-AS aktivt subwoofer array-modul, der dækker sikkerhed, installation, rigning, software og specifikationer for professionel lydforstærkning.
Preview RCF EVOX 12 Professional Aktiv Two-Way Array Brugermanual
Omfattende brugermanual til det bærbare aktive lydsystem RCF EVOX 12 med detaljerede sikkerhedsforanstaltninger, produktbeskrivelse, installationsvejledning, bagpaneltilslutninger, tekniske specifikationer og dimensioner.