Indledning
The Poly Voyager 5200 is a single-ear Bluetooth headset designed for mobile professionals who require clear communication on the go. It features advanced noise-canceling technology and an ergonomic design for all-day comfort. This manual provides essential information for setting up, operating, and maintaining your headset.
Nøglefunktioner omfatter:
- Crystal clear Bluetooth audio quality with triple-mic active Digital Signal Processing (DSP) and wind canceling.
- Up to 7 hours of talk time and a roaming range of up to 98 feet (30 meters).
- Ergonomic design rigorously tested for stability and comfort on a wide range of ear shapes.
- Voice controls for answering/ignoring calls and activating virtual assistants like Siri, Google Assistant, or Cortana.
- Moisture-resistant P2i coating for durability.
Hvad er der i æsken
Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede:
- Poly Voyager 5200 Mono Bluetooth Headset
- Micro USB to USB-A Charging Cable
- Ørepropper (små, mellemstore, store)
Produkt overview
Familiarize yourself with the components of your Poly Voyager 5200 headset:
Billede: Forside view of the Poly Voyager 5200 Wireless Headset, showcasing its ergonomic design and control buttons.
Billede: Side view of the Poly Voyager 5200 Wireless Headset, highlighting its over-ear wearing style and comfortable fit.
Headsetkomponenter:
- Afbryderen: Located on the main body, used to turn the headset on or off.
- Opkaldsknap: Typically on the side, used to answer, end, or reject calls.
- Lydstyrkeknapper: Usually two distinct buttons for increasing og decreasing audio volume.
- Mute-knap: A dedicated button to mute or unmute the microphone during calls.
- Mikrofonbom: Extends from the main body to position the microphones closer to your mouth for clear voice pickup.
- Opladningsport: Micro USB port for connecting the charging cable.
- Øreprop: Replaceable silicone tip that fits into your ear canal for comfort and sound delivery.
Opsætning
1. Opladning af headsettet
Before first use, fully charge your headset. Connect the micro USB end of the charging cable to the headset's charging port and the USB-A end to a USB wall charger or a computer's USB port. The charging indicator light will show the charging status. A full charge takes approximately 1.5 hours and provides up to 7 hours of talk time.
2. Pairing with a Mobile Device
To connect your headset to your mobile phone or tablet via Bluetooth:
- Turn on your headset by sliding the power switch.
- Aktiver Bluetooth på din mobilenhed.
- Put the headset into pairing mode. This is usually done by pressing and holding the Call button until the indicator light flashes red and blue, or a voice prompt says "pairing."
- On your mobile device, search for new Bluetooth devices. Select "Poly Voyager 5200" from the list of available devices.
- If prompted, enter the passcode "0000" (four zeros).
- Once paired, the headset indicator light will stop flashing and a voice prompt will confirm the connection.
3. Fitting the Headset
The Voyager 5200 comes with small, medium, and large ear tips to ensure a comfortable and secure fit. Experiment with different sizes to find the one that best suits your ear. The headset is designed to be worn over the ear, with the microphone boom positioned towards your mouth for optimal voice clarity.
Betjeningsvejledning
Opkaldsstyring
- Besvar/afslut opkald: Tryk én gang på opkaldsknappen.
- Afvis opkald: Tryk og hold opkaldsknappen nede i 2 sekunder.
- Slå lyden fra/til: Tryk på knappen Lydløs under et aktivt opkald.
- Transfer Audio: During a call, press and hold the Call button for 2 seconds to transfer audio between your phone and headset.
Voice Controls and Assistant
The headset supports voice commands and integration with your phone's virtual assistant:
- When an incoming call rings, you can say "Answer" or "Ignore" to manage the call hands-free.
- Press the dedicated voice control button to activate Siri, Google Assistant, or Cortana on your connected smartphone.
Audio Streaming
The Voyager 5200 can stream audio from your mobile device, including music, podcasts, and GPS directions. Use your phone's media controls to play, pause, or skip tracks.
Multipunktsforbindelse
Your headset can connect to two mobile devices simultaneously. This allows you to seamlessly switch between calls or audio from different devices without re-pairing.
Opretholdelse
Rensning
Regularly clean your headset to ensure optimal performance and hygiene. Use a soft, dry cloth to wipe down the headset. For the ear tip, you may gently remove it and clean with a damp cloth and mild soap, ensuring it is completely dry before reattaching.
Opbevaring
When not in use, store your headset in a cool, dry place away from extreme temperatures and direct sunlight. Avoid storing it with sharp objects that could scratch or damage the device.
Fejlfinding
Ingen lyd eller dårlig lydkvalitet
- Sørg for, at headsettet er opladet og tændt.
- Check that the headset is properly paired and connected to your device.
- Skru op for lydstyrken på både headsettet og din tilsluttede enhed.
- Move closer to your device; the maximum range is 98 feet (30 meters).
- Ensure there are no obstructions or strong interference sources (e.g., Wi-Fi routers, other Bluetooth devices) between the headset and your device.
- Try re-pairing the headset with your device.
Cannot Pair Headset
- Sørg for, at headsettet er i parringstilstand (indikatorlampen blinker rødt og blåt).
- Turn off and then on your mobile device's Bluetooth.
- Delete the headset from your device's Bluetooth list and try pairing again.
- Ensure the headset is not already connected to another device (due to multi-point feature).
Voice Commands Not Responding
- Ensure your phone's voice assistant is enabled and configured correctly.
- Tal tydeligt og direkte ind i mikrofonen.
- Check for firmware updates for your headset via the Poly app (if available).
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | Voyager 5200 |
| Forbindelsesteknologi | Bluetooth 5.0 |
| Trådløs kommunikationsteknologi | Bluetooth |
| Inkluderede komponenter | Mono Bluetooth headset, micro USB to USB-A charging cable, and ear tips (Small, Medium, Large). |
| Materiale | Plast |
| Opladningstid | 1.5 timer |
| Kompatible enheder | Mobiltelefoner |
| Kontroltype | Stemmestyring, berøring |
| Varens vægt | 1 ounce |
| Vandmodstandsniveau | Vandtæt |
| Frekvensområde | 20Hz-20KHz |
| Batterilevetid | 7 time |
| Audio driver type | Dynamisk Driver |
| Ørestykke form | Rund |
| UPC | 196337577824 |
| Fabrikant | Poly |
| Produktdimensioner | 1 x 1 x 1 tommer |
| Varemodelnummer | 203500-101 |
| Batterier | 1 Lithium Metal batteri påkrævet (inkluderet) |
| Særlige funktioner | Noise Cancellation, Microphone Included |
| Formfaktor | On Ear, Over Ear |
| Farve | Sort |
| Øreplacering | In Ear |
| Støjkontrol | Aktiv støjreduktion |
Produktvideoer
Plantronics Voyager 5200 - Bluetooth Headset Overview
Denne video giver et generelt overblikview of the Plantronics Voyager 5200 Bluetooth Headset, demonstrating its key features and design.
Plantronics Voyager 5200 Wireless Bluetooth Headset Demonstration
Watch this video for a detailed demonstration of the Plantronics Voyager 5200 Wireless Bluetooth Headset in action, showcasing its functionality and user experience.
Garanti og support
Garantioplysninger
The Poly Voyager 5200 Wireless Headset comes with a 1-year limited warranty in the U.S. For global warranty information and details, please visit the official Poly website kl Poly.com.
Kundesupport
For further assistance, technical support, or to access additional resources such as FAQs and software downloads, please visit the Poly support webwebstedet eller se kontaktoplysningerne på din produktemballage.
