Indledning
This manual provides essential instructions for the safe installation, operation, and maintenance of your Philips 49022 Embrace Wall LampLæs venligst denne manual grundigt inden installation, og gem den til senere brug.
The Philips 49022 Embrace Wall Lamp is designed for indoor use, offering a modern lighting solution for various rooms such as homes, offices, studies, living rooms, and bedrooms. It features a synthetic white finish and a convenient on-base switch.
Vigtige sikkerhedsinstruktioner
- Always disconnect power before installation, cleaning, or servicing.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter.
- Sørg for, at monteringsfladen kan bære armaturets vægt.
- Overskrid ikke den angivne voltage (240 volt).
- Use only the specified light source type (Incandescent).
- Keep away from water and moisture. This product is for indoor use only.
- Forsøg ikke at ændre armaturet.
Opsætning og installation
The Philips 49022 Embrace Wall Lamp is designed for flush mount installation. Ensure you have the necessary tools and follow these steps carefully.
Pakkeindhold:
- 1 x Philips 49022 Embrace Wall Lamp
Nødvendige værktøjer (ikke inkluderet):
- Skruetrækker
- Afisoleringstænger
- Drill (if required for mounting)
- Blyant
- Målebånd
Installationstrin:
- Sluk for strømmen: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker.
- Forbered monteringsoverfladen: Identify the desired location for the wall lamp. Ensure it is a stable surface capable of supporting the lamp's weight (approximately 500 grams).
- Montering af monteringsbeslag: Fastgør lamp's mounting bracket to the wall using appropriate screws and anchors (not included, typically supplied with the lamp or purchased separately).
- Elektrisk tilslutning: Tilslut husholdningsledningerne til stikkontakten.amp's wires. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Ensure all connections are secure and insulated with wire nuts.
- Fastgør Lamp: Fastgør forsigtigt l'enamp fixture to the mounting bracket, ensuring all wires are tucked safely inside the junction box or fixture base.
- Installer lyskilde: Insert the appropriate incandescent light bulb (not included) into the lamp stikkontakt.
- Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.
- Test funktionalitet: Use the on-base switch to turn the lamp on and off to confirm proper operation.
Betjeningsvejledning
The Philips 49022 Embrace Wall Lamp er designet til enkel betjening.
- Tænd/sluk: Locate the convenient on-base switch on the lamp stativ.
- Vippekontakt: Tryk på kontakten for at tænde for lamp ON. Press it again to turn the lamp SLUKKET.
No complex controls or settings are required for this fixture.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your Philips 49022 Embrace Wall Lamp.
- Rensning:
- Afbryd altid strømmen før rengøring.
- Tør lamp med en blød, tør klud.
- Brug ikke slibende rengøringsmidler, opløsningsmidler eller polermidler, da de kan beskadige finishen.
- Udskiftning af pære:
- Sørg for at lamp is turned off and cool before attempting to replace the bulb.
- Unscrew the old bulb counter-clockwise.
- Screw in a new incandescent bulb of the correct wattage and type (as specified for the fixture) clockwise until snug.
- Inspektion: Efterse lamp for any signs of damage to the wiring or fixture. If damage is found, discontinue use and consult a qualified electrician.
Fejlfinding
If you encounter issues with your Philips 49022 Embrace Wall Lamp, se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp tændes ikke. |
|
|
| Lamp flimrer. |
|
|
| Lamp laver en summende lyd. |
|
|
Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte Philips kundesupport eller en kvalificeret elektriker.
Produktspecifikationer
| Feature | Detalje |
|---|---|
| Mærke | PHILIPS |
| Modelnummer | 49022 Embrace |
| ASIN | B01GE0FDH4 |
| Farve | Hvid |
| Materiale | Syntetisk |
| Stil | Moderne |
| Lysarmatur Form | Væg |
| Værelsestype | Home, Office, Study, Living, Bedroom |
| Indendørs/Udendørs brug | Indendørs |
| Strømkilde | Elektrisk med ledning |
| Installationstype | Flush Mount |
| Lyskildetype | Glødelampe |
| Voltage | 240 volt |
| Inkluderede komponenter | 1 Wall Lamp |
| Varens vægt | 500 gram |
| Controller type | Push Button (On-base switch) |
| Dimensioner (LxBxH) | 11.3 cm x 16.3 cm x 21.3 cm |
Garanti og support
Garanti: The Philips 49022 Embrace Wall Lamp comes with a 1-year warranty on the product from the date of invoice. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or further assistance, please contact Philips customer service through their official webwebstedet eller de kontaktoplysninger, der følger med din købsdokumentation.
