Yaheetech Barbord YT-1580 Brugsanvisning

Indledning

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Bar Table, model YT-1580. This multifunctional round table features a gas lift for height adjustment and a 360° swivel tabletop, designed for versatile use in various settings.

Image: The Yaheetech Bar Table, featuring a black round top and a chrome-finished adjustable base.

Sikkerhedsoplysninger

Læs og forstå venligst alle sikkerhedsadvarsler inden montering og brug.

• ADVARSEL: To avoid injury, do not place your fingers between the tabletop and the base when adjusting the height.
• Always ensure the table is on a stable, level surface.
• Do not exceed the maximum weight limit of 40 kg (88 lb) to prevent tipping or damage.

Reservedelsliste

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included assembly guide for a complete list and diagrams.

• Bordplade (1)
• Gasløftecylinder (1)
• Bundplade (1)
• Connecting Plate (for tabletop) (1)
• Height Adjustment Lever (1)
• Screws and Allen Wrench (for assembly)

Opsætning og montering

The Yaheetech Bar Table is designed for straightforward assembly. Follow these steps for proper setup:

1. Pak alle komponenter ud, og verificer dem i forhold til styklisten.
2. Attach the connecting plate to the underside of the tabletop using the provided screws. Ensure it is centered and securely fastened.
3. Insert the gas lift cylinder into the center hole of the base plate. Ensure the black protective cap is removed from the top of the gas lift cylinder before proceeding.
4. Carefully place the tabletop (with the connecting plate attached) onto the top of the gas lift cylinder. The connecting plate should fit securely over the cylinder.
5. Attach the height adjustment lever to the mechanism on the underside of the tabletop, near the gas lift cylinder.
6. Kontroller, at alle forbindelser er tætte, og at bordet er stabilt, før brug.

For a visual guide, please refer to the official product video below:

Betjeningsvejledning

Højdejustering

The table features a gas lift mechanism for easy height adjustment. To adjust the table height:

1. To raise the table: Lift the height adjustment lever while applying slight upward pressure on the tabletop. The table will automatically extend. Release the lever at the desired height.
2. To lower the table: Lift the height adjustment lever and apply downward pressure on the tabletop. The table will retract. Release the lever at the desired height. Note that significant downward pressure may be required to lower the table.

Image: Illustration showing the upward and downward movement for height adjustment of the bar table.

Billede: Nærbillede view of the height adjustment lever located beneath the tabletop.

360° Swivel Tabletop

The tabletop is designed to swivel 360 degrees, providing convenient access from any angle. Simply rotate the tabletop manually to your desired position.

Image: Illustration depicting the 360-degree swivel functionality of the bar table's top.

Opretholdelse

To ensure the longevity and appearance of your Yaheetech Bar Table, follow these maintenance guidelines:

• Rensning: Wipe the tabletop and base with a damp klæde. Undgå slibende rengøringsmidler eller skrappe kemikalier, der kan beskadige finishen.
• Opbevaring: For convenient storage, the table can be disassembled into its main components. Store in a dry, cool place.
• Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Efterspænd om nødvendigt.

Fejlfinding

If you encounter any issues with your Yaheetech Bar Table, refer to the following common solutions:

• Table does not adjust height:
  • Ensure the black protective cap has been removed from the top of the gas lift cylinder during assembly.
  • Verify the height adjustment lever is correctly installed and engaged with the gas lift mechanism.
  • For lowering, apply firm downward pressure on the tabletop while lifting the lever.
• Table feels unstable or wobbly:
  • Check that all screws connecting the tabletop to the connecting plate are securely tightened.
  • Ensure the gas lift cylinder is fully seated in the base plate.
  • Verify the table is placed on a flat, level surface.
• Tabletop spins too easily or cannot be locked:
  • The tabletop is designed for 360-degree swivel and does not feature a locking mechanism for rotation. This is a standard design feature.

Specifikationer

Image: Diagram illustrating the dimensions of the Yaheetech Bar Table, including height and tabletop diameter.

Garanti og support

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the manufacturer's official webwebsted for disse oplysninger.