Project Source loftarmatur brugsanvisning

1. Produktet er slutview

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.

Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.

2. Sikkerhedsoplysninger

Læs og forstå alle instruktioner, før du påbegynder installationen. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer, der kan forårsage personskade eller materielle skader.

• ADVARSEL: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
• Alle elektriske forbindelser skal være i overensstemmelse med lokale forskrifter, forordninger eller National Electric Code (NEC). Kontakt en kvalificeret elektriker, hvis du ikke er bekendt med elektriske ledninger.
• Installer ikke denne armatur i våde eller dråber.amp steder.
• Håndter glaskomponenter forsigtigt for at forhindre brud og skader.
• Sørg for, at armaturet er sikkert monteret på et strukturelt element i loftet.
• Use only the type and wattage of bulbs specified for this fixture.

3. Pakkens indhold

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Semi-Flushmount Ceiling Fixture Body (1)
• Etched Frosted Glass Shade (1)
• Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
• Decorative Finial (1)
• Brugsanvisning (dette dokument) (1)

4. Opsætning og installation

Nødvendige værktøjer (medfølger ikke): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

1. Sluk for strømmen: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage tester.
2. Forbered montering: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
3. Ledningsforbindelser:
   • Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut grønt eller bart kobber ground wire from the fixture to the jord ledningen fra samledåsen (eller til den grønne jordskrue på monteringsbeslaget) ved hjælp af en trådmøtrik.
   • Stik forsigtigt alle ledninger ind i samledåsen.
4. Fastgør armaturhus: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
5. Installer pærer: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage angivet på armaturet.
6. Fastgør glasskærm: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
7. Gendan strøm: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.

5. Betjeningsvejledning

This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.

The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.

6. Vedligeholdelse

Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.

• Rensning: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
• Udskiftning af pære: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.

7. Fejlfinding

Hvis du støder på problemer med dit armatur, kan du se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.

For yderligere assistance kan du besøge producentens website or contact their support line. Contact details are typically found on the product packaging or the manufacturer's official webwebsted.