Broadlink RM Mini3 Universal Remote Control Hub Brugsanvisning

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your Broadlink RM Mini3 Universal Remote Control Hub. The RM Mini3 is designed to integrate and control various infrared (IR) appliances in your home, transforming them into smart devices accessible via your smartphone or voice assistants.

2. Sikkerhedsoplysninger

Ensure the device is powered by a stable 5V power source.
Udsæt ikke enheden for vand eller ekstreme temperaturer.
Hold enheden væk fra børn.
Do not attempt to disassemble or repair the device yourself. Contact support if needed.
The device operates on a 2.4 GHz Wi-Fi network only. Ensure your router supports this frequency.

3. Pakkens indhold

Broadlink RM Mini3 Universal Remote Control Hub
USB-strømkabel (Bemærk: Strømadapter medfølger ikke)
Instruktionsmanual

4. Produktet er slutview

The Broadlink RM Mini3 is a compact, cylindrical device designed to blend seamlessly into your home environment. It features a single LED indicator and a reset button.

Broadlink RM Mini3 Universal Remote Control Hub

Figure 1: Broadlink RM Mini3 device with blue LED indicator.

Figure 2: Dimensions of the Broadlink RM Mini3 (64.5mm height, 55mm width).

LED-indikatorstatus:

Blue LED (Flashing Intermittently): AP Setup mode.
Blue LED (Flashing Quickly): Smart Setup mode.
Hvid LED: IR signal learning or emitting.

5. Opsætningsvejledning

5.1 Indledende enhedsopsætning

Tænd: Connect the RM Mini3 to a 5V USB power source using the provided cable. The LED indicator will light up.
Download app: Download and install the free BroadLink IHC App from the App Store (iOS) or Google Play Store (Android).
Nulstil enhed (hvis nødvendigt): If the LED is not flashing quickly (Smart Setup mode), press and hold the tiny pin-hole reset button with a slim needle for at least 6 seconds until the blue Wi-Fi LED flashes quickly.
Tilføj enhed i appen:
- Open the IHC App.
- Tap "+" (Add device) on the top right corner.
- Tap "Allow Only While In Use" to grant location permission.
- Select "Add a New Device".
- Choose "Universal Remote" from the device list.
- Select "RM mini 3".
- Tap "Next" and confirm your phone is connected to a 2.4 GHz Wi-Fi network.
- Tap "Done".
- Choose your home 2.4 GHz Wi-Fi network and input your password.
- Wait for the device to connect (up to 60 seconds). The LED will flash slowly, then turn off upon successful setup.
- Select the newly added device and choose a room for it, then name the device to complete the setup.

Figure 3: Visual guide for the 3-step setup process.

5.2 Opsætningsvideoguide

Video 1: Detailed guide on setting up the Broadlink RM Mini3, including LED indications and app navigation.

6. Betjeningsvejledning

6.1 Adding IR Appliances (TV, AC, etc.)

The RM Mini3 supports over 80,000 IR-controlled devices. Only IR (38KHz) remotes are supported; Bluetooth remotes are not compatible.

Enter Device Page: From the app's home screen, tap on your "Universal Remote" device.
Add Appliance: Tap "Add appliances" at the bottom.
Choose Category: Select the category of your appliance (e.g., TV, AC Remote Full Display).

Pair IR Device:

Choose the brand of your target device from the list (e.g., Sony TV, Gree Air Conditioner). If your brand is not listed, you can tap "Can't find my brand" and enter the model number.
The app will present multiple IR options. Test each option by pressing buttons on the virtual remote and observing if your appliance responds correctly.
If an option works, confirm all buttons function as expected.

If no pre-defined options work, proceed to

Relaterede dokumenter - RMmini3

	BroadLink Wi-Fi Smart Remote Hub med Sensorkabel - Brugermanual og funktioner Oplev BroadLink Wi-Fi Smart Remote Hub, en alsidig enhed til styring af IR- og RF-apparater. Funktionerne omfatter stemmestyring med Alexa og Google Assistant, fjernstyring af apps, temperatur-/fugtighedsregistrering og brugerdefineret planlægning for en smartere hjemmeoplevelse.
	BroadLink Mini-Hub GW4C: Brugermanual og opsætningsvejledning Officiel brugermanual til BroadLink Mini-Hub GW4C. Denne vejledning indeholder trinvise instruktioner til installation, app-opsætning, parring med Alexa og Google Home samt stemmestyringsfunktioner. Lær, hvordan du forbedrer din smart home-oplevelse med BroadLink.
	BroadLink RM mini 3 universalfjernbetjening opsætning og brugervejledning Omfattende guide til opsætning og brug af BroadLink RM mini 3 universalfjernbetjeningen. Lær om pakkens indhold, LED-indikatorer, Wi-Fi-opsætning, tilføjelse af enheder og styring af dine smarte husholdningsapparater.
	BroadLink RM4 Pro universalfjernbetjening hurtigstartguide Lynstartguide til BroadLink RM4 Pro universalfjernbetjeningen, detaljeret opsætning, app-forberedelse, tilføjelse af enheder, integrationer med Google/Alexa/IFTTT, ofte stillede spørgsmål og vigtige noter.
	BroadLink hurtigstartguide: Opsætning og konfiguration Omfattende guide til opsætning af BroadLink-smart-enheder, der dækker appinstallation, enhedsforbindelse, IR/RF-programmering og integration med Google Assistant og Amazon Alexa.
	BroadLink Universal Remote Quick Setup Guide Comprehensive guide to setting up your BroadLink Universal Remote. Learn to connect to Wi-Fi, add IR and RF appliances, and integrate with voice assistants like Amazon Alexa and Google Assistant.