Indledning
The Dennerle Trocal LED Control is a sophisticated 4-channel dimming controller designed for Dennerle Trocal LED aquarium lights. It allows for precise control over light intensity and color, enabling realistic simulations of natural light cycles such as sunrise, sunset, and moon phases. This manual provides detailed instructions for the setup, operation, and maintenance of your device.
Produkt overview
Figure 1: Dennerle Trocal LED Control with its packaging, showing the device and its primary features.
Figur 2: En detaljeret view of the Dennerle Trocal LED Control, highlighting the connection ports for power and LED lights.
Nøglefunktioner:
- 4-channel dimming control for Dennerle Trocal LED lights.
- Controls 1-2 Trocal LED lights, each with 2 separately controllable channels (Warm white and Cool white).
- Enables realistic sunrise and sunset scenarios with gradual color transitions.
- Individual dimming curve adjustable per channel with up to 8 dimming points per daily program.
- Adjustable moon phase simulation, ideal for nocturnal aquatic animals.
Hvad er der i æsken:
- Dennerle Trocal LED Control Unit
Opsætning
1. Udpakning og inspektion:
Carefully remove the Dennerle Trocal LED Control from its packaging. Inspect the device for any signs of damage. If any damage is found, do not proceed with setup and contact customer support.
2. Placering:
Place the control unit in a dry, well-ventilated area, away from direct sunlight and excessive moisture. Ensure it is easily accessible for programming and adjustments.
3. Connecting LED Lights:
- Ensure both the Dennerle Trocal LED Control and your LED lights are powered off.
- Connect the output cables from your Dennerle Trocal LED lights to the corresponding input ports on the control unit. The device supports up to two Trocal LED lights, each utilizing two separate channels.
- Sørg for, at alle forbindelser er sikre.
4. Strømtilslutning:
Connect the power adapter to the Dennerle Trocal LED Control unit, then plug the adapter into a suitable power outlet. The device will power on and display its initial screen.
Betjeningsvejledning
1. Initial Power-On and Display:
Upon powering on, the display will show the current date, time, and the status of the connected LED channels (e.g., "Beleucht. 1 100%", "Beleucht. 2 100%").
2. Navigation and Programming:
The control unit features a set of buttons for navigation and programming. Refer to the on-screen menus for specific programming options.
- Indstilling af tid og dato: Access the system settings menu to adjust the current time and date.
- Programming Dimming Curves:
- Navigate to the "Program" or "Dimming Curve" section.
- Select the channel you wish to program (e.g., Channel 1 for Warm White, Channel 2 for Cool White).
- Set up to 8 dimming points per channel for your daily program. Each point defines a specific time and light intensity percentage.
- Utilize this feature to create custom sunrise and sunset effects, gradually increasing eller decreasing lysintensitet.
- Moon Phase Simulation:
Access the "Moon Phase" setting to enable and configure the nocturnal lighting cycle. This feature is designed to simulate natural moonlight, beneficial for nocturnal aquatic life.
- Manuel kontrol: The device may offer options for temporary manual override of programmed settings, allowing you to adjust light intensity instantly.
3. Saving Settings:
After making any changes to the programming, ensure you save your settings as prompted by the device's interface to prevent loss of configuration.
Opretholdelse
1. Rengøring:
Regularly wipe the exterior of the control unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing and display. Ensure the device is unplugged before cleaning.
2. Miljøforhold:
Keep the device in a dry environment. Avoid exposing it to water splashes or high humidity, which can lead to internal damage.
3. Firmwareopdateringer:
Check the official Dennerle website periodically for any available firmware updates. Updates can improve performance, add new features, or resolve known issues. Follow the manufacturer's instructions carefully when performing updates.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Ingen strømforsyning; defekt strømadapter; løs forbindelse. | Check power outlet. Ensure power adapter is securely connected to the device and outlet. Try a different outlet. |
| LED lights do not respond to control. | Incorrect wiring; lights not compatible; programming error. | Verify all LED light connections are secure and correctly plugged into the control unit. Ensure lights are compatible Dennerle Trocal LEDs. Review your programmed settings for errors. |
| Light intensity is not as programmed. | Incorrect dimming points; unsaved settings; firmware issue. | Re-check and adjust dimming points in your program. Ensure settings are saved. Consider checking for and applying firmware updates. |
| Displayet viser fejlmeddelelse. | Internal error; connection issue. | Note the error code or message. Try restarting the device by unplugging and re-plugging it. If the error persists, consult the Dennerle support webwebsted eller kontakt kundeservice. |
If the problem persists after attempting these solutions, please contact Dennerle customer support for further assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 5564 |
| Dimensioner (L x B x H) | 6 x 15.5 x 23 cm (ca. 2.36 x 6.1 x 9.06 tommer) |
| Vægt | 481 g (ca. 1.06 lbs) |
| Maks. Wattage | 120 watt |
| Kontrolkanaler | 4 (controlling 1-2 Trocal LED lights with 2 channels each) |
| Særlige funktioner | Dimmable, Sunrise/Sunset Simulation, Moon Phase Simulation |
| Anvendelsesområde | Aquarium Lighting Control |
Garanti og support
For warranty information and technical support, please refer to the official Dennerle webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.
Dennerle Official Webwebsted: www.dennerle.com
