BENINCA Bull 424R skydeportsåbner brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your BENINCA Bull 424R Sliding Gate Opener. The Bull 424R is a silent, powerful, and reliable 24VDC operator designed for intensive use with sliding gates. It features an LCD display for easy programming, internal limit-switches, and multiple electronic settings for torque and timing adjustments.

Please read this manual thoroughly before beginning installation or operation to ensure safe and correct use of the product.

2. Sikkerhedsoplysninger

ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i alvorlig personskade eller materielle skader.

• Installation must be performed by qualified personnel in compliance with local safety regulations.
• Sørg for, at strømforsyningen er afbrudt, før du udfører installations-, vedligeholdelses- eller reparationsarbejde.
• Hold hænder, fødder og tøj væk fra porten og åbnermekanismen under drift.
• Lad ikke børn lege med eller betjene portåbnerens betjeningselementer.
• Inspicer regelmæssigt porten og åbneren for tegn på slid, skader eller forkert justering.
• Sørg for, at alle sikkerhedsanordninger (f.eks. fotoceller, sikkerhedskanter) er korrekt installeret og fungerer korrekt.

3. Pakkens indhold

Bekræft, at alle nedenstående komponenter er til stede i din pakke:

• BENINCA Bull 424R Sliding Gate Opener Unit
• Control Panel (integrated)
• Modtagerenhed
• To (2) fjernbetjeninger
• Five (5) sections of 39-inch Rack Gear
• Installation Hardware (bolts, nuts, washers - specific quantities may vary)
• Brugervejledning (dette dokument)

Figure 3.1: Complete BENINCA Bull 424R Sliding Gate Opener kit components.

4. Opsætning og installation

4.1 Mekanisk installation

1. Montering af åbneren: Securely mount the BENINCA Bull 424R motor unit on a stable, level concrete base next to the gate, ensuring proper alignment with the gate's movement path.
2. Installing the Rack Gear: Attach the rack gear sections along the bottom edge of the sliding gate. Ensure the rack meshes correctly with the opener's pinion gear, maintaining a small clearance (approximately 1-2mm) to prevent binding.
3. Justering af grænsekontakt: Adjust the internal limit switches to define the gate's fully open and fully closed positions. Refer to the control panel's specific instructions for precise adjustment.

4.2 Elektriske forbindelser

Alle elektriske tilslutninger skal udføres af en kvalificeret elektriker.

1. Strømforsyning: Connect the 24VDC power supply to the designated terminals on the control board. Ensure correct polarity.
2. Sikkerhedsanordninger: Connect any external safety devices, such as photocells or safety edges, to their respective terminals on the control board.
3. Modtagerenhed: Connect the included receiver unit to the control board. This unit allows the remote controls to operate the gate.

Figure 4.1: BENINCA Receiver and Remote Control Kit.

4.3 Programming the Control Panel and Remotes

The BENINCA Bull 424R features an LCD display for easy programming and digital adjustment of torque and timing.

1. Indledende opstart: After all electrical connections are made, apply power to the unit. The LCD display will illuminate.
2. Adgang til menuen: Use the control panel buttons (usually labeled MENU, UP, DOWN, ENTER) to navigate the programming menu.
3. Learning Remote Controls: Follow the on-screen instructions to program the remote controls. Typically, this involves selecting a "Learn Remote" option and pressing a button on each remote control.
4. Justering af parametre: Utilize the menu to set parameters such as motor torque, gate speed, automatic closing time, and obstacle detection sensitivity.

Figure 4.2: BENINCA Remote Control.

5. Betjeningsvejledning

Once installed and programmed, operating your BENINCA Bull 424R gate opener is straightforward.

5.1 Brug af fjernbetjeningen

• Press the designated button on your remote control once to open the gate.
• Press the button again while the gate is moving to stop it.
• Press the button a third time to reverse the gate's direction (if stopped mid-cycle) or to close it (if fully open).

5.2 Manuel udløsning

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the motor unit (refer to the specific diagram in your product's quick start guide for exact location). Engage the release mechanism to disengage the motor, allowing the gate to be moved by hand.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din portåbner's lange levetid og pålidelige drift.

• Månedlig: Inspect the gate's movement for any obstructions. Check the rack gear for debris and ensure it is securely fastened.
• Kvartalsvis: Lubricate the gate's wheels, hinges, and any moving parts as recommended by the gate manufacturer. Check the condition of the power cable and all electrical connections.
• Årligt: Have a qualified technician inspect the entire system, including the motor, control board, safety devices, and gate structure, for wear or damage.

CAUTION: Always disconnect power to the unit before performing any maintenance.

7. Fejlfinding

This section addresses common issues you might encounter with your BENINCA Bull 424R gate opener.

8. Specifikationer

Key technical specifications for the BENINCA Bull 424R Sliding Gate Opener:

• Model: BENINCA Bull 424R
• Fabrikant: Beninca
• Motortype: 24VDC
• Kontrolpanel: Integreret med LCD-display
• Grænsekontakter: Indre
• Programmering: Digital adjustment for torque and timing
• ASIN: B01FG7NE18
• Dato først tilgængelig: 22. april 2018

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BENINCA dealer. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official BENINCA webwebsted eller kontakt deres kundeserviceafdeling.