Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Kwikset CL101105 Standard Duty Commercial Passage Lever. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This passage lever is designed for light to medium traffic flow areas and is suitable for hallway or closet doors where no locking mechanism is required.
Image: Kwikset CL101105 Standard Duty Commercial Passage Lever. This image displays the complete lever assembly, including the cylindrical chassis, the passage lever handle, and the latch mechanism, all in a satin chrome finish.
Sikkerhedsoplysninger
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Sørg for, at alle komponenter er forsvarligt fastgjort før brug.
- Do not modify the product in any way, as this may void the warranty and compromise safety.
- Hold små dele væk fra børn.
Hvad er der i æsken
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Lever Handles (2)
- Cylindrical Chassis
- Låsemekanisme
- Slagplade
- Monteringsskruer
Opsætning og installation
This section outlines the steps for installing the Kwikset CL101105 Passage Lever. Ensure your door is prepared with standard bore holes (typically 2-1/8 inches for the main bore and 1 inch for the latch bore) and a backset of 2-3/8 inches or 2-3/4 inches.
Nødvendige værktøjer:
- Phillips hovedskruetrækker
- Målebånd
- Blyant
- Chisel (optional, for strike plate mortise)
Installationstrin:
- Forbered døren: Ensure the door has the correct bore holes and backset. The backset is the distance from the edge of the door to the center of the main bore hole. This lever supports adjustable backsets of 2-3/8 inches to 2-3/4 inches.
- Installer låsen: Insert the latch mechanism into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure it with the provided screws.
- Install the Exterior Lever Assembly: Place the exterior lever assembly through the main bore hole, ensuring the spindle engages with the latch mechanism.
- Install the Interior Lever Assembly: Align the interior lever assembly with the exterior assembly and the spindle. Secure both assemblies together using the through-bolts or mounting screws. The through-bolt can be removed for easier installation if preferred.
- Installer låsepladen: Mark the position of the latch bolt on the door frame. Chisel out a shallow mortise if necessary, and then secure the strike plate to the door frame with screws.
- Test drift: Close the door and test the lever operation. The lever should retract the latch bolt smoothly.
Betjeningsvejledning
The Kwikset CL101105 is a passage lever, meaning it does not have a locking function. It is designed for doors that require a latching mechanism but no security.
- To open the door, simply depress the lever handle. This will retract the latch bolt, allowing the door to open.
- To close the door, push the door shut. The latch bolt will automatically retract and extend as it meets the strike plate, securing the door in the closed position.
Opretholdelse
Regular maintenance ensures the smooth operation and extends the lifespan of your passage lever.
- Rensning: Rengør håndtaget med en blød,amp klud. Undgå slibende rengøringsmidler, opløsningsmidler eller barske kemikalier, da disse kan beskadige overfladen.
- Smøring: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal mechanisms if operation becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Tilspændingsskruer: Check and tighten all mounting screws periodically to ensure the lever remains securely attached to the door.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lever is stiff or hard to turn. | Ophobning af snavs eller manglende smøring. | Clean the lever and apply a silicone-based lubricant to the latch bolt and internal mechanisms. |
| Latch bolt does not retract fully. | Misalignment of components or debris. | Check for obstructions. Ensure the lever assemblies are properly aligned and screws are tightened. Re-lubricate if necessary. |
| Lever feels loose on the door. | Monteringsskruerne er løse. | Tighten all mounting screws securely. |
| Door does not latch properly. | Strike plate misalignment or incorrect backset. | Adjust the strike plate position on the door frame. Verify the backset setting during installation. |
Specifikationer
- Model: CL101105
- Mærke: Kwikset
- Type: Standard Duty Commercial Passage Lever
- ANSI Rating: A156.2 Grade 2 (Tested to over 400,000 cycles)
- UL-vurdering: 3 Hour (Suitable for fire doors)
- ADA-overholdelse: Ja
- backset: Adjustable 2-3/8 inches to 2-3/4 inches
- Materiale: Cylindrical Steel Coated with Zinc Dichromate (Corrosion Resistance)
- Slutte: Chrome
- Produktdimensioner: 7.76 x 9.02 x 4.37 tommer
- Vægt: 2 pund
Garantioplysninger
This Kwikset CL101105 Standard Duty Commercial Passage Lever comes with a limited lifetime warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Kwikset webwebsted.
Kundesupport
If you encounter any issues or have questions regarding your Kwikset CL101105 Passage Lever, please contact Kwikset customer support. Contact information can typically be found on the product packaging or the official Kwikset webwebsted.
For mere information, besøg Kwikset-butik på Amazon.
