Apera Instruments MP511 Benchtop pH Meter

1. Introduktion

This manual provides instructions for the proper setup, operation, and maintenance of the Apera Instruments MP511 Benchtop pH Meter. The MP511 is designed for accurate pH measurements with a range of -2.00 to 19.99 pH and an accuracy of ±0.01 pH. It features automatic temperature compensation (ATC), auto-calibration with buffer recognition, and advanced digital filtering technology for improved response time and accuracy. The meter also includes GLP standard data management, storage for 500 data sets, and RS232 data output.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede ved udpakning:

• MP511 Benchtop pH Meter Unit
• 3-in-1 Combination pH Electrode
• Flexible Electrode Holder
• RS232 Software (typically on a CD or available for download)
• Strømadapter
• pH Buffer Solutions (e.g., pH 4.00, 7.00, 10.01)
• Instruktionsmanual

3. Opsætning

1. Assemble the Electrode Holder: Attach the flexible electrode holder to the meter base. Ensure it is securely fastened to provide stable support for the electrode.
2. Connect the Electrode: Plug the BNC connector of the 3-in-1 combination pH electrode into the pH/mV input port on the back of the meter. If a separate temperature probe is used, connect it to the TEMP port.
3. Tilslut strøm: Plug the DC 9V power adapter into the DC 9V port on the back of the meter and then into a standard electrical outlet.
4. Indledende placering: Place the electrode in its storage solution or a beaker of distilled water when not in use.

Figur 3.1: The Apera Instruments MP511 Benchtop pH Meter with its electrode immersed in a sample solution within a beaker, demonstrating a typical setup for pH measurement. The flexible electrode holder is visible, supporting the electrode.

4. Betjening

1. Tænd/sluk: Tryk på ON/OFF knappen til at tænde eller slukke måleren.
2. Valg af tilstand: Tryk på MODE button to cycle through different measurement modes (pH, mV, temperature).
3. Enhedsvalg: Tryk på ENHED button to change temperature units between °C and °F.
4. Data Storage/Recall: Brug M+/RM button to store current readings or recall previously stored data.
5. Confirm/Enter: De ENTER button is used to confirm selections or enter calibration mode.

Figur 4.1: En detaljeret view of the MP511 meter's LCD display and control panel, showing the CAL, ON/OFF, M+/RM, MODE, ENTER, and UNIT buttons. The display shows pH and temperature readings.

5. Kalibrering

Regular calibration is essential for accurate pH measurements. The MP511 features automatic calibration with buffer recognition.

1. Forbered buffere: Ensure you have fresh pH buffer solutions (e.g., pH 4.00, 7.00, 10.01) at room temperature.
2. Skyl elektroden: Rinse the electrode thoroughly with distilled water and gently blot dry with a lint-free tissue.
3. Gå ind i kalibreringstilstand: With the meter powered on and in pH mode, press the CAL button. The display will indicate calibration mode.
4. First Buffer Calibration: Immerse the electrode into the first buffer solution (e.g., pH 7.00). The meter will automatically recognize the buffer and stabilize. Press ENTER for at bekræfte.
5. Subsequent Buffer Calibration: Rinse the electrode again. Immerse it into the next buffer solution (e.g., pH 4.00 or pH 10.01). The meter will recognize and stabilize. Press ENTER to confirm. Repeat for additional buffer points as needed.
6. Afslut kalibrering: After completing all desired calibration points, the meter will automatically return to measurement mode or prompt to save calibration.

6. Måletilstande

The MP511 offers three distinct measurement modes:

• Stable Measurement Display Mode: Displays the pH reading once it has stabilized. This is the standard mode for most measurements.
• Timing Measuring Mode: Allows for measurements at set intervals, useful for monitoring changes over time.
• Kontinuerlig måletilstand: Provides real-time, continuous pH readings, suitable for dynamic processes.

Refer to the detailed instructions in the full manual for specific steps on how to select and configure each measurement mode.

7. Datastyring

The MP511 incorporates GLP (Good Laboratory Practice) standard data management features:

• Datalagring: The meter can store up to 500 sets of measurement data.
• Opbevaringsmetoder: Data can be stored manually or automatically at user-defined timing intervals.
• Dataoutput: An RS232 port is provided for connecting the meter to a computer to transfer stored data using the included software.

Figur 7.1: The rear panel of the MP511 meter, displaying the REF, pH/mV, TEMP, RS232, and DC 9V input ports. The RS232 port facilitates data transfer to a computer.

8. Vedligeholdelse

Proper maintenance ensures the longevity and accuracy of your pH meter.

• Elektrodepleje:
  • Always keep the electrode bulb immersed in storage solution when not in use. Never store it dry.
  • Skyl elektroden med destilleret vand før og efter hver måling.
  • Clean the electrode regularly according to the electrode's specific cleaning instructions, especially if readings become sluggish or inaccurate.
• Målerrengøring: The MP511 meter unit meets IP54 waterproof and dustproof standards. Clean the exterior with a damp klæde. Undgå at bruge skrappe kemikalier eller slibende materialer.
• Strømkilde: The meter is battery-powered (though also uses a DC 9V adapter). Ensure the power adapter is used correctly. If using internal batteries, replace them as needed.

9. Fejlfinding

10. Specifikationer

11. Garanti og support

For warranty information, technical support, or service inquiries, please contact Apera Instruments directly through their official webwebstedet eller kundeservicekanaler. Behold din købskvittering som købsbevis.