Indledning
The Polaris P825 Robotic Cleaner is designed to efficiently clean all surfaces of in-ground pools up to 40 feet. It features advanced navigation, wall climbing capabilities, and tile line scrubbing for comprehensive pool maintenance. The patented Cyclonic Vacuum Technology ensures consistent suction, effectively capturing debris. Its user-friendly design includes a Push'N'Go™ filter canister for easy debris removal and a transparent lid for quick visual inspection.
Image: The Polaris P825 Robotic Pool Cleaner operating underwater, demonstrating its cleaning action.
Nøglefunktioner
- Automatic Pool Cleaning: Deftly navigates all pool surfaces, climbs walls, and scrubs to the tile line for thorough cleaning.
- In-Ground Pool Compatibility: Suitable for in-ground swimming pools up to 40 ft.
- Cyclonic Vacuum Technology: Patented technology ensures powerful cleaning action that captures debris without losing suction.
- Easy Access Filter Canister: Push'N'Go™ filter canister with a large transparent viewing window allows for easy debris removal. Simply shake and spray to clean.
- Surface Control System™: Adjusts pool surface settings for optimal wall climbing performance.
- Dual-Cleaning Cycle: Offers one-touch, on-demand cleaning cycles.
- Durable Caddy: Includes a premium caddy for easy transport and storage.
- Langt kabel: Equipped with a 50ft cable for extensive reach.
Image: The Polaris P825 Robotic Pool Cleaner shown with its included premium caddy, highlighting ease of transport.
Opsætning
- Pakker ud: Carefully remove the Polaris P825 and its components from the packaging.
- Assemble Caddy: If not pre-assembled, follow the instructions to assemble the premium caddy.
- Place Cleaner on Caddy: Secure the robotic cleaner onto the caddy for easy movement to the pool.
- Tilslut strøm: Ensure the power supply is connected to a grounded outlet.
- Submerge Cleaner: Gently lower the cleaner into the pool. Allow it to sink to the bottom and release any trapped air bubbles.
- Uncoil Cable: Ensure the 50ft cable is fully uncoiled and spread out in the pool to prevent tangling during operation.
Video: An official product video demonstrating the Polaris P825 Premium Robotic Pool Cleaner, including initial setup and placement in the pool.
Operation
- Tænd: Once the cleaner is submerged and the cable is uncoiled, turn on the power supply.
- Select Cleaning Cycle: Use the control panel on the caddy to select your desired cleaning cycle. The dual-cleaning cycle offers one-touch, on-demand cleaning.
- Surface Control System: Adjust the Surface Control System™ settings if necessary to optimize wall climbing performance based on your pool's surface type.
- Overvåg fremskridt: The cleaner will automatically navigate and clean the pool. The transparent lid allows you to monitor the debris level in the filter canister.
- Færdiggørelse: The cleaner will automatically shut off upon completion of the cleaning cycle.
Video: En officiel produktvideoasing the Polaris P825 Pool Cleaner in operation, demonstrating its movement and cleaning patterns.
Image: The control panel of the Polaris P825, mounted on its caddy, showing the user interface for selecting cleaning modes.
Opretholdelse
- Remove from Pool: After the cleaning cycle, gently pull the cleaner out of the pool using the handle.
- Empty Filter Canister: Open the transparent lid and remove the Push'N'Go™ filter canister.
- Rens filter: Shake the canister to dislodge large debris, then spray it thoroughly with a garden hose to remove fine particles.
- Genindsæt filter: Place the clean filter canister back into the cleaner and close the lid securely.
- Store Cleaner: Store the cleaner on its caddy in a cool, dry place away from direct sunlight.
Image: The Polaris P825 with its transparent lid open, revealing a full debris canister, illustrating the Push'N'Go™ feature.
Fejlfinding
- Cleaner Not Moving: Ensure the power supply is connected and turned on. Check for any obstructions in the cleaner's brushes or wheels.
- Dårlig rengøringsevne: Clean the filter canister thoroughly. Check if the pool water chemistry is balanced. Ensure the cleaner is operating for the full cycle duration.
- Cleaner Not Climbing Walls: Verify the Surface Control System™ settings are appropriate for your pool surface. Check for excessive algae or slick spots on pool walls.
- Cable Tangling: Ensure the cable is fully uncoiled before placing the cleaner in the pool. The swivel cable is designed to minimize tangling, but manual untangling may occasionally be required.
- Cleaner Stuck: If the cleaner gets stuck on a drain or obstacle, gently reposition it.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | Polaris P825 Robotic Pool Cleaner |
| Mærke | Polaris |
| Varemodelnummer | P825 |
| Produktdimensioner | 22 x 22 x 18.5 tommer |
| Varens vægt | 39.1 pund |
| Strømkilde | AC |
| Slange længde | 50 fod |
| Kapacitet | 4 Liters (debris canister) |
| Kontrolmetode | Røre |
| Installationstype | Enkel opsætning |
| Effektivitet | Meget effektiv |
| Farve | Flerfarvet |
Garanti og support
The Polaris P825 Robotic Pool Cleaner comes with a Begrænset garanti. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Polaris webwebsted.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Polaris customer service. Contact information can typically be found in your product packaging or on the Polaris brand webwebsted.
