Mitel 80E00011AAA-A

Mitel Aastra 612D håndsæt med opladerbase brugermanual

Model: 80E00011AAA-A

1. Introduktion

This manual provides essential instructions for the proper setup, operation, and maintenance of your Mitel Aastra 612D Handset with Charger Base. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

2. Produktet er slutview

The Mitel Aastra 612D is a robust cordless DECT handset designed for professional communication environments. It features a clear display, intuitive keypad, and comes with a dedicated charger base for convenient power management.

Mitel Aastra 612D Handset in its charger base

Figure 1: Mitel Aastra 612D Handset and Charger Base. The image displays the Aastra 612D cordless handset docked in its black charger base. The handset features a monochrome display showing 'AASTRA', '567', 'Aara', '22-Jan-2012', and '15:52'. Below the screen is a navigation cluster, function keys, and a standard numeric keypad with '0' through '9', '*', and '#' keys. The handset is primarily dark gray with a silver faceplate.

3. Opsætning

3.1 Udpakning

  • Fjern forsigtigt alle komponenter fra emballagen.
  • Kontroller, at alle de varer, der er anført i pakkens indhold, er til stede.
  • Gem emballagen til senere transport eller opbevaring.

3.2 Opladning af håndsættet

  1. Connect the power adapter to the charger base and plug it into a power outlet.
  2. Place the handset firmly into the charger base. Ensure the charging contacts align.
  3. The handset display or an indicator light will confirm charging status.
  4. Allow the handset to charge for at least 8-12 hours before initial use to ensure full battery capacity.

3.3 Indledende tænding

  1. After charging, remove the handset from the base.
  2. Press and hold the power button (if applicable) or a designated key to turn on the handset.
  3. Følg alle instruktioner på skærmen for den første opsætning, f.eks. valg af sprog eller indstillinger for dato/tid.

4. Betjeningsvejledning

4.1 Foretage et opkald

  1. Ensure the handset is powered on and registered to your system.
  2. Indtast det ønskede telefonnummer ved hjælp af tastaturet.
  3. Press the green call key (often marked with a phone icon) to initiate the call.
  4. Tryk på den røde afsluttast for at afslutte et opkald.

4.2 Besvarelse af et opkald

  1. When the handset rings, press the green call key to answer.
  2. Alternatively, if the auto-answer feature is enabled, simply lifting the handset from the charger base may answer the call.

4.3 Menunavigation

  • Use the navigation keys (up, down, left, right) to scroll through menu options on the display.
  • Press the 'OK' or 'Select' key (often the center key of the navigation cluster) to confirm a selection.
  • Press the 'Back' or 'Cancel' key to return to the previous menu or exit a function.

5. Vedligeholdelse

5.1 Rengøring

To clean the handset and charger base, use a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals, cleaning solvents, or abrasive materials, as these can damage the device. Ensure no moisture enters openings.

5.2 Pleje af batterier

To prolong battery life, avoid exposing the handset to extreme temperatures. If the handset will not be used for an extended period, store it in a cool, dry place. Replace the battery when its performance significantly degrades.

6. Fejlfinding

This section addresses common issues you might encounter with your Mitel Aastra 612D Handset.

ProblemLøsning
Håndsættet tænder ikke.Ensure the battery is correctly inserted and fully charged. Place the handset on the charger base for several minutes.
Ingen klartone.Verify the handset is registered to the base station. Check the connection of the charger base to the power outlet and the telephone system.
Dårlig opkaldskvalitet eller støj.Move closer to the base station to improve signal strength. Check for sources of interference (e.g., other electronic devices).
Håndsættet oplader ikke.Ensure the charger base power adapter is securely connected. Clean the charging contacts on both the handset and the base with a dry cloth.

7. Specifikationer

FeatureDetalje
Modelnummer80E00011AAA-A
Produktdimensioner10 x 10 x 6 tommer
Varens vægt4 pund
ASINB01DJT69CG
FabrikantAastra
Dato først tilgængelig1. november 2013

8. Garantioplysninger

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your vendor for specific terms and conditions. Keep your proof of purchase for warranty claims.

9. Support

For technical assistance, further information, or if you encounter issues not covered in this manual, please contact your product supplier or Mitel customer support. You may find additional resources, FAQs, and software updates on the official Mitel webwebsted.

Relaterede dokumenter - 80E00011AAA-A

Preview Mitel EX Controller, GX Gateway, AG4100, TA7100 Installations- og konfigurationsvejledning
Dette dokument indeholder detaljerede instruktioner til installation og konfiguration af Mitel EX Controller, GX Gateway, AG4100 Analog Gateways og TA7100-serienheder i MiVoice 5000-løsningen.
Preview Mitel EX Controller, GX Gateway, AG4100, TA7100: Installations- og konfigurationsvejledning
Denne vejledning indeholder detaljerede instruktioner til installation og konfiguration af Mitel EX Controller, GX Gateway, AG4100 Analog Gateways og TA7100-serienheder i MiVoice 5000-løsningen.
Preview Mitel 7x2 DECT Telefon: Schnelle Bedienungsanleitung für 712DT, 722DT, 732D, 742D
Denne Schnellbedienungsanleitung bietet detaillierte Informationen zur Bedienung der Mitel 7x2 DECT Telefone (Modelle 712DT, 722DT, 732D, 742D), individuelle Tastenfunktioner, Anzeige-Symbolen, LED-Indikatorer og grundlegende Gesprogsfunktioner. Zusätzliche Benutzerdokumentation er tilgængelig på www.mitel.com.
Preview Konfigurationsmanual til Mitel DT4x3 trådløse telefoner
En omfattende vejledning til installation, konfiguration og vedligeholdelse af Mitel DT4x3 DECT trådløse telefoner. Dækker opsætning med WinPDM og CPDM3, systemintegration og fejlfinding af virksomhedskommunikationssystemer.
Preview Mitel CX 1.1: Nyheder i dokumentationen til version 1.1
Detaljer om opdateringer og ny dokumentation til Mitel CX version 1.1, inklusive understøttelse af Windows 2025, grundlæggende opkaldsoptagelse og europæisk portugisisk.
Preview Installations- og konfigurationsvejledning til Mitel EX Controller, GX Gateway, AG4100 og TA7100
Ce guide détaille les procedures d'installation and the configuration des system de communication Mitel, inklusive l'EX Controller, GX Gateway, serie AG4100 og TA7100, i cadre de la løsning MiVoice 5000. system.