Jamara 061263 2.4 GHz modtager FCX 6 Pro Tel Sensor brugsanvisning

Indledning

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Jamara 061263 2.4 GHz Receiver FCX 6 Pro Tel Sensor. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• This product is not a toy. It is intended for use with remote-controlled models and should be handled by individuals aged 14 years and up.
• Ensure correct polarity when connecting power to the receiver. Incorrect connections can cause permanent damage.
• Do not expose the receiver to moisture, extreme temperatures, or direct sunlight.
• Avoid strong impacts or vibrations, which can damage internal components.
• Always perform a range check before operating your model to ensure reliable signal reception.
• Disconnect power from the receiver when not in use or during maintenance.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1x Jamara 061263 2.4 GHz Receiver FCX 6 Pro Tel Sensor
• Instruktionsmanual (dette dokument)

Produkt overview

The Jamara 061263 receiver is a 6-channel 2.4 GHz receiver designed for use with Jamara FCX-6Pro Tel transmitters. It features an automatic frequency hopping digital system for reliable communication.

Figure 1: Jamara 061263 2.4 GHz Receiver
This image displays the Jamara 061263 2.4 GHz receiver. Key features visible include the "LED" indicator, "UPDATE" port, "ProTel" branding, "JAMARA GERMANY" logo, "6 CHANNELS" and "2.4GHZ RECEIVER" labels. On the right side, connection ports are labeled: "B/VCC" (Battery/Voltage Common Collector), "I-BUS", "SENS" (Sensor), and individual channels "CH1" through "CH6". The receiver also indicates "AUTOMATIC FREQUENCY HOPPING DIGITAL SYSTEM". Two grey antenna wires extend from the left side of the unit.

Nøglekomponenter:

• LED-indikator: Provides status feedback (e.g., power, binding status).
• UPDATE Port: Bruges til firmwareopdateringer.
• Channel Ports (CH1-CH6): Connect servos, ESCs, and other control devices.
• B/VCC Port: Power input for the receiver.
• I-BUS Port: For digital serial bus communication.
• SENS Port: For connecting telemetry sensors.
• Antenner: Two antenna wires for optimal signal reception.

Opsætning

Follow these steps to set up your Jamara 061263 receiver:

1. Montering: Securely mount the receiver in your model, ensuring the antennas are positioned away from metal parts and carbon fiber, ideally at a 90-degree angle to each other for best reception.
2. Strømtilslutning: Connect a suitable power source (4.0-6.5V DC) to the B/VCC port. Ensure correct polarity.
3. Servo/ESC-forbindelser: Connect your servos and Electronic Speed Controllers (ESCs) to the appropriate channel ports (CH1-CH6) as per your model's requirements and transmitter setup.
4. Bindende procedure:
   • Ensure your Jamara FCX-6Pro Tel transmitter is turned off.
   • Power on the receiver. The LED indicator will typically flash, indicating it's in binding mode or waiting for a signal.
   • Refer to your Jamara FCX-6Pro Tel transmitter manual for its specific binding procedure. Generally, this involves holding a bind button on the transmitter while powering it on, or selecting a bind function from the transmitter's menu.
   • Once bound, the receiver's LED should turn solid, indicating a successful connection.
   • Turn off both the transmitter and receiver, then power them on again in the correct sequence (transmitter first, then receiver) to confirm the binding.
5. Telemetry Sensor Connection (Optional): If using telemetry sensors, connect them to the SENS port. Refer to the sensor's manual for specific connection details.

Operation

Once the receiver is successfully bound to your transmitter and all components are connected, you can begin operating your model. Always ensure the transmitter is powered on before the receiver to prevent unintended control inputs.

• Tænd sekvens: Always turn on your transmitter first, then power on the model (and thus the receiver).
• Tjek før flyvning: Before each use, verify that all control surfaces and functions respond correctly to transmitter inputs. Check battery levels of both the transmitter and the model.
• Områdekontrol: Perform a range check in an open area to ensure reliable signal reception at a safe distance.
• Sluk-sekvens: Always power off the model (receiver) first, then turn off your transmitter.

Opretholdelse

Korrekt vedligeholdelse sikrer din modtagers levetid og pålidelighed:

• Rensning: Keep the receiver clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
• Opbevaring: Opbevar modtageren et tørt, køligt sted væk fra direkte sollys og ekstreme temperaturer, når den ikke er i brug.
• Antennepleje: Do not bend or crimp the antenna wires excessively. Ensure they are not cut or damaged.
• Firmwareopdateringer: Periodically check the Jamara website for any available firmware updates for your receiver. Use the UPDATE port and follow the manufacturer's instructions for updating.

Fejlfinding

Hvis du støder på problemer med din modtager, kan du se følgende almindelige problemer og løsninger:

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please contact Jamara directly through their official webwebstedet eller autoriserede distributører. Behold din købskvittering som købsbevis.

For further assistance, visit the official Jamara webwebsted: www.jamara.com