1. Introduktion
This manual provides essential information for the safe and effective use of your JUWEL KOMBIFRANK 4945 Wall Safe. Please read it thoroughly before installation and operation. Keep this manual for future reference.
Figur 1: JUWEL KOMBIFRANK 4945 Wall Safe with its door open, revealing the internal shelf and the mechanical combination dial on the door.
2. Sikkerhedsinstruktioner
- Ensure the safe is securely mounted to a wall according to installation instructions to prevent tipping or removal.
- Do not store flammable liquids or explosives inside the safe.
- Keep the combination confidential and do not write it down where it can be easily found.
- Regularly check the safe for any signs of damage or tampering.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- JUWEL KOMBIFRANK 4945 Wall Safe Unit
- Brugervejledning (dette dokument)
- Mounting Hardware (screws, anchors - may vary based on wall type)
4. Opsætning og installation
The JUWEL KOMBIFRANK 4945 is designed for wall mounting. Proper installation is crucial for security.
4.1 Valg af placering
- Select a discreet and secure location within a solid wall structure.
- Ensure there are no electrical wires, plumbing, or other obstructions behind the chosen wall section.
- Consider accessibility for daily use but also for concealment.
4.2 Installationstrin
- Forbered vægåbningen: Carefully cut an opening in the wall that matches the dimensions of the safe's body, ensuring a snug fit. Refer to the safe's external dimensions (265mm x 415mm x 242mm) for precise cutting.
- Indsæt pengeskabet: Slide the safe into the prepared wall opening. Ensure the front flange sits flush against the wall surface.
- Sikr pengeskabet: Use appropriate mounting hardware (not always included, may need to be purchased separately based on wall material) to secure the safe to the wall studs or masonry. Utilize all available mounting points inside the safe.
- Concealment (Optional): Once installed, the safe can be concealed behind a picture, mirror, or other wall decor for added discretion.
5. Operating the Combination Lock
The JUWEL KOMBIFRANK 4945 features a 2-digit mechanical combination lock. The factory default combination is typically provided with the safe or can be found on a sticker inside the safe door upon first opening.
5.1 Åbning af pengeskabet
- Ryd opkaldet: Turn the dial several full rotations clockwise to clear any previous settings.
- Enter First Number: Turn the dial clockwise, passing the first number of your combination three times, and stop precisely on the first number on the fourth pass.
- Enter Second Number: Turn the dial counter-clockwise, passing the second number of your combination once, and stop precisely on the second number on the second pass.
- Åben døren: Once the combination is entered correctly, turn the handle (if present) or pull the door open.
Note: Precision is key when dialing mechanical combinations. If the safe does not open, repeat the steps carefully.
5.2 Ændring af kombinationen
Specific instructions for changing the combination are usually provided on a separate sheet or sticker inside the safe. This process often involves a reset button or lever that is only accessible when the safe door is open. If no instructions are found, contact JUWEL customer support.
6. Vedligeholdelse
- Rensning: Rengør ydersiden af pengeskabet med en blød, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Smøring: The mechanical lock mechanism generally requires no user lubrication. If the dial becomes stiff, consult a professional locksmith or JUWEL support.
- Dørhængsler: Periodically check door hinges for smooth operation. If they squeak, a small amount of light lubricant can be applied.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Safe door will not open after dialing combination. | Incorrect dialing procedure or incorrect combination. | Ensure you are following the dialing instructions precisely. Verify the correct combination. Try clearing the dial and re-entering the combination carefully. |
| Skiven føles stiv eller svær at dreje. | Dust accumulation or lack of lubrication. | Do not attempt to lubricate the internal mechanism yourself. Contact a qualified locksmith or JUWEL customer support. |
| Safe is not securely mounted. | Improper installation or insufficient mounting hardware. | Re-evaluate the installation. Ensure appropriate anchors and screws are used for your wall type and that all mounting points are utilized. Consult a professional if unsure. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Model | KOMBIFRANK 4945 |
| Type | Vægsikker |
| Låsetype | Mechanical Combination (2-digit) |
| Materiale | Legeret stål |
| Dørtykkelse | 8 mm |
| Udvendige mål (H x B x D) | 265 mm x 415 mm x 242 mm |
| Vægt | Approximately 1 kg (Note: This weight seems unusually low for a safe of this type and material. Please verify actual product weight upon receipt.) |
9. Garanti og support
Specific warranty information for your JUWEL KOMBIFRANK 4945 Wall Safe is typically provided with the product packaging or can be found on the official JUWEL webwebsted. Gem venligst din købsbevis til garantikrav.
For technical support, parts, or service inquiries, please contact JUWEL customer service. Contact details can usually be found on the manufacturer's webwebsted eller produktdokumentation.
Fabrikant: Juwel
Modelnummer: 4945
