Mcbazel SW-102

Mcbazel Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter

Brugermanual

Indledning

The Mcbazel Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter is a compact and versatile instrument designed for radio enthusiasts and professionals. It provides direct digital readout of forward and reflected power, along with Standing Wave Ratio (SWR), without the need for calibration. This meter is essential for optimizing antenna systems within the VHF (144-148MHz) and UHF (430-450MHz) amateur radio bands, supporting frequencies from 125MHz to 525MHz. It features a low insertion loss design, allowing for permanent connection, and comes with N-Type base connectors, including adapters for SO239.

Mcbazel Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter

Figure 1: Mcbazel Surecom SW-102 Digital VHF/UHF Antenna Power & SWR Meter.

Produktegenskaber

Key features of the Surecom SW-102 meter including low insertion loss, frequency range, battery, max power, and impedance.

Figur 2: Visuel repræsentation af produktets vigtigste funktioner.

Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle nedenstående varer er til stede og i god stand:

Contents of the Surecom SW-102 package including the meter, adapters, USB cable, plug, and manual.

Figur 3: Inkluderede varer i produktpakken.

Opsætning

  1. Indledende opladning: Before first use, connect the provided USB charging cable to the meter's 5V Micro USB port and plug it into the power adapter.
    The LED indicator will be red while charging and turn green when fully charged.
    Surecom SW-102 meter showing the Micro USB charging port.

    Figure 4: Connecting the USB charging cable to the meter.

  2. Connecting to Radio and Antenna:
    • Identify the "TX" port on the meter (for connection to your radio) and the "ANT" port (for connection to your antenna or dummy load).
    • Connect your radio's antenna output to the "TX" port of the SW-102 meter.
    • Connect your antenna or a dummy load to the "ANT" port of the SW-102 meter.
    • Use the provided N-Type to SO239 adapters if your radio or antenna uses SO239 connectors. For other connector types (e.g., BNC, SMA, PL-259, TNC), additional third-party adapters are required and not included.
    Diagram showing the TX and ANT ports, LCD display, and control buttons on the Surecom SW-102 meter.

    Figure 5: Port identification and connections.

  3. Optimal Measurement Conditions: For the best SWR measurement results, it is recommended to use a metal sheet (not included) as a ground plane, especially with certain antenna types. Avoid placing objects nearby or horizontally during testing, as this can affect the accuracy of the measurements.
    Illustrations demonstrating correct and incorrect SWR measurement setups, highlighting the use of a metal sheet and avoiding nearby objects.

    Figure 6: Guidelines for accurate SWR measurement.

Betjeningsvejledning

  1. Tænd/sluk: Press and hold the red "POWER" button for 2 seconds to turn the device on or off.
  2. Displayfunktioner: The LCD display shows various parameters including Battery Level, RF Power, Frequency Counter, VSWR Level, and VSWR.
    Detailed diagram of the Surecom SW-102 LCD display, labeling battery level, RF power, frequency counter, VSWR, and key functions.

    Figure 7: Understanding the LCD display.

  3. Measuring SWR and Power:
    • Ensure the meter is properly connected between your radio and antenna/dummy load.
    • Power on the SW-102 meter.
    • Activate the transmit function on your radio. The meter will automatically display the forward power, reflected power, and SWR.
    • The meter measures CW, AM, and FM signals. It is not designed to measure RTTY or SSB signals.
  4. Knap funktioner:
    • Red Button (POWER/ENTER): Long press for power on/off. Short press for Enter/Confirm.
    • Blue Button (MENU/-): Used to navigate menus or decrease values.
    • Yellow Button (CLEAR/+): Used to clear readings or increase values.

Specifikationer

FeatureVærdi
MærkeMcbazel
Modelnummer4336324474 (SW-102)
Frekvensområde125 - 525 MHz
Measurable Power Range1 - 120W (+-0.5%)
Impedans50 Ohm
Batteri600 mAh litiumpolymer (inkluderet)
StikN-Type Base Connectors
Varens vægt12 ounces (ca. 340 g)
Produktdimensioner7.17 x 1.81 x 4.8 tommer (ca. 18.2 x 4.6 x 12.2 cm)
FarveSort
Dimensions of the Surecom SW-102 meter: 7.5cm width, 7.5cm height, 3.5cm depth.

Figur 8: Produktdimensioner.

Opretholdelse

Fejlfinding

ProblemMulig årsag/løsning
Ingen skærm / Enhed tænder ikke
  • Battery is low or depleted. Recharge the device using the provided USB cable and power adapter.
  • Power button not held long enough. Press and hold the red POWER button for 2 seconds.
Inaccurate SWR Readings
  • Incorrect connection. Ensure the radio is connected to "TX" and the antenna/dummy load to "ANT".
  • Interference from nearby objects. Ensure the meter is clear of obstructions during measurement.
  • Antenna tuning issue. The SWR reading indicates the antenna itself may need tuning.
  • Operating outside specified frequency range (125-525MHz).
  • Attempting to measure Digital Radio (DMR), RTTY, or SSB signals. This meter is not compatible with these modes.
Opladnings-LED lyser ikke
  • USB cable or power adapter is faulty. Try a different cable or adapter.
  • Charging port is damaged. Contact customer support.

Vigtige kompatibilitetsnoter:

Garanti og support

Mcbazel stands behind the quality of its products. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Mcbazel webwebsted.

If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your Surecom SW-102 meter, please contact Mcbazel customer support. Our dedicated team is available to assist you.

You can find contact information for support on the product packaging or through the retailer where you purchased the device.

Relaterede dokumenter - SW-102

Preview Nissei SWR/Wattmåler TX-101A, TX-102, TX-402, TX-502 Brugermanual
Brugermanual til Nissei SWR/Watt-målere, modellerne TX-101A, TX-102, TX-402 og TX-502. Detaljer om produktfunktioner, specifikationer, betjening og installation af disse radiofrekvensmålere.
Preview EL-ERTK-A2 ERRTS felttestsæt brugermanual | ELPRO Technologies
Denne brugermanual giver omfattende vejledning til ELPRO Technologies EL-ERTK-A2 felttestsættet, der er designet til test af feltstationer og Store & Forward-repeatere til hændelsesrapporteringsradiotelemetrisystemer (ERRTS). Den dækker opsætning, betjening med Surecom SW-102 VSWR wattmeteret og brugen af ​​ERRTS Ranger-software til dataanalyse.
Preview Brugermanual til mQuvée vinkøleskab
Omfattende brugermanual til mQuvée vinkøleskabe, der dækker installation, betjening, temperaturindstillinger, opbevaring, vedligeholdelse og fejlfinding. Indeholder modeloplysninger for SW-12 til SW-215.
Preview Brugermanual til lydniveaumålere i SNDWAY SW-525A-G-serien
Denne brugermanual indeholder omfattende oplysninger om betjening, funktioner, tekniske specifikationer og vedligeholdelse af SNDWAY SW-525A, SW-525B, SW-525C, SW-525D og SW-525G vægmonterede lydniveaumålere.
Preview Nissei RS-102, RS-402, RS-502 SWR/Power Meter brugsanvisning
Omfattende instruktionsmanual til Nissei RS-102, RS-402 og RS-502 SWR/Power Meters, med detaljerede oplysninger om funktioner, specifikationer, installation, betjening og sikkerhedsforanstaltninger for måling af RF-effekt og VSWR.
Preview EL-ERTK-A2 ERRTS testsæt og Ranger-software brugermanual
Omfattende brugermanual til ELPRO EL-ERTK-A2 ERRTS testsættet og Ranger-softwaren. Lær om funktioner, opsætning, betjening og dataafkodning til VHF-radiotelemetrisystemer.