Amazon Basics GF-50201M Rolling Desk Chair Instruction Manual

Indledning

This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics GF-50201M Rolling Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Sikkerhedsoplysninger

Vigtig: Adhere to all safety guidelines to prevent injury or damage.

• Overskrid ikke den maksimale vægtkapacitet på 124.74 kg.
• Ensure proper assembly of all components before use.
• Use the chair on a hard, level floor surface for optimal stability and mobility.
• Undersøg regelmæssigt alle dele for slid eller skader. Stop brugen, hvis der konstateres skader.
• Hold små dele væk fra børn under montering.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

• Rygpude
• Sædepude
• Sædeplade
• Gaslift
• Grundlag
• Hjul (5 stk.)
• Samlebeslag (skruer, skiver, unbrakonøgle)

Opsætning og montering

Follow these steps for quick and easy assembly. An Allen wrench is included for all necessary fastenings.

Trin 1: Fastgør hjulene til basen

Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.

Image: The five-star base with casters inserted.

Step 2: Insert Gas Lift into Base

Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.

Step 3: Attach Seat Plate to Seat Cushion

Align the seat plate with the pre-drilled holes on the underside of the seat cushion. Use the provided screws and Allen wrench to securely fasten the plate. Ensure the adjustment lever faces the front of the seat.

Image: Close-up of the seat adjustment lever mechanism.

Step 4: Attach Back Cushion to Seat Assembly

Connect the back cushion support to the seat plate using the remaining screws and Allen wrench. Tighten all screws firmly but do not overtighten.

Billede: Bagside view of the chair showing the mesh back and connection points.

Step 5: Place Assembled Seat onto Gas Lift

Carefully place the assembled seat (with the seat plate attached) onto the top of the gas lift cylinder. The seat will settle into place once weight is applied.

Montering Video

Video: Official Amazon Basics assembly guide for the Low-Back Computer Chair. This video demonstrates the step-by-step process of putting the chair together, from attaching the casters to securing the seat and backrest.

Betjeningsvejledning

Sædehøjdejustering

To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, lift your weight off the seat and pull the lever upwards. Release the lever at your desired height.

Image: A hand demonstrating the use of the pneumatic seat height adjustment lever.

Drejning og mobilitet

The chair features a 360-degree swivel function, allowing for easy rotation. The smooth-rolling casters provide effortless movement across hard floor surfaces.

Image: A person comfortably seated in the Amazon Basics desk chair, illustrating its use in an office setting.

Opretholdelse

To maintain the appearance and functionality of your chair:

• Rensning: Tør af med annonceamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Efterspænd efter behov.
• Hjul: Hold hjulene fri for snavs for at sikre jævn rulning.

Fejlfinding

Specifikationer

Image: Diagram illustrating the dimensions of the Amazon Basics Rolling Desk Chair.

Garanti og support

For warranty information or customer support, please refer to the Amazon Basics official webwebstedet eller kontakt Amazons kundeservice direkte. Gem din købskvittering til eventuelle garantikrav.