Indledning
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Figur 1: Forside view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Opsætning
1. Udpakning og inspektion
- Tag forsigtigt printeren og alt tilbehør ud af emballagen.
- Kontroller, at alle komponenter, der er anført på følgesedlen, er til stede.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Batteriinstallation og opladning
- Sørg for, at printeren er slukket.
- Find batterirummet på printeren.
- Insert the battery, ensuring proper alignment with the contacts.
- Luk batterirummet forsvarligt.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Ilægning af termopapir
- Åbn dækslet til papirrummet.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Søg efter available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Serie: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Betjeningsvejledning
1. Tænd/sluk
- For at tænde skal du trykke på og holde tænd/sluk-knappen nede, indtil displayet lyser.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Udskrivning af en kvittering
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Brug af LCD-skærmen
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Opretholdelse
1. Rengøring af printhovedet
- Sluk printeren, og afbryd den fra enhver strømkilde.
- Åbn papirrummet.
- Gently wipe the print head surface with a lint-free cloth dampafsluttet med isopropylalkohol.
- Lad printhovedet tørre helt, før du lukker dækslet og tænder printeren.
- Perform this cleaning regularly, especially if print quality degrades.
2. Batteripleje
- For at maksimere batteriets levetid bør du undgå at aflade batteriet helt ofte.
- Opbevar printeren og batteriet et køligt og tørt sted, når de ikke er i brug i længere perioder.
- Use only genuine Intermec replacement batteries.
3. Generel rengøring
Tør printerens yderside af med en blød, tør klud.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Printeren tænder ikke | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Ingen udskrivning | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Dårlig printkvalitet | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Forbindelsesproblemer | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | PB51B33004100 |
| Udskrivningsteknologi | Direkte termisk |
| Printer output | Monokrom |
| Maksimal mediestørrelse | 4 tommer |
| Forbindelsesteknologi | USB, Serial, Bluetooth |
| Varens vægt | 42 Ounces (approx. 2.63 lbs) |
| Pakkedimensioner | 10.2 x 10 x 5 tommer |
| Controller type | Android (kompatibel) |
| Fabrikant | Intermec |
Garanti og support
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) webhjemmeside for detaljerede garantivilkår.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
