Indledning
The Elinchrom EL-Skyport Transmitter Plus offers simplicity, durability, and reliability for remote control and triggering of Elinchrom flash units. Operating on the 2.4 GHz bandwidth, this transmitter provides extensive control over 16 frequency channels, each with 4 groups, extending its range up to 200 meters (656 feet). It is designed for seamless integration with various Elinchrom units, including RX, ELC, and ELB series.
Hvad er der i æsken
- EL-Skyport Transmitter Plus
- Håndledsrem
- 2.5 mm sync cord to PC
- Oplysninger om 2 års garanti
Opsætning
Installer batterier: The EL-Skyport Transmitter Plus requires AA batteries for operation. Open the battery compartment located on the underside of the unit and insert two AA batteries, ensuring correct polarity.
Image: Elinchrom EL-Skyport Transmitter Plus with its battery compartment open, revealing two AA batteries correctly inserted. This view helps in understanding battery installation.
Montering på kamera: Slide the transmitter onto your camera's hot shoe mount. Ensure it is securely seated.
Image: The Elinchrom EL-Skyport Transmitter Plus securely mounted on the hot shoe of a DSLR camera, ready for use.
Connect to Flash Unit (Optional): For flash units without built-in Skyport receivers, use the provided 2.5 mm sync cord to connect the transmitter to the flash unit's PC sync port.
Tænd: Locate the ON/OFF switch on the side of the transmitter and slide it to the 'ON' position. The indicator lights on the transmitter will illuminate.
Billede: En nærbillede fra siden view of the Elinchrom EL-Skyport Transmitter Plus, highlighting the power switch and the 2.5mm sync port.
Betjeningsvejledning
The EL-Skyport Transmitter Plus allows for reliable triggering and power adjustment of your Elinchrom flash units.
Channel and Group Selection: The transmitter features 16 different channels (8 in normal mode and 8 in speed mode) and 4 groups per channel. Use the 'CH' button to cycle through channels and the 'Group' button to select the desired group (1-4). Ensure your flash units are set to the same channel and group as the transmitter.
Billede: Top-down view of the Elinchrom EL-Skyport Transmitter Plus, clearly showing the control panel with buttons for Group, Mode, Channel (CH), and power adjustment (+/-).
Justering af blitzstyrke: Use the '+' and '-' buttons on the transmitter to quickly increase or decrease the flash power for the selected group. This adjustment is reflected on compatible Elinchrom units.
Udløser: Once connected and configured, simply press the test button on the transmitter or trigger your camera's shutter to fire the connected flash units. The transmitter provides a reliable trigger up to 200 meters (656 feet) away.
Image: The main front view of the Elinchrom EL-Skyport Transmitter Plus, showcasing its display and primary control buttons.
Optimering af modtagelse: For best performance and extended range, optimize reception by rotating the transmitter on the camera's hot shoe.
Image: A visual representation of the Elinchrom EL-Skyport Transmitter Plus rotating on its hot shoe mount, illustrating its adjustable orientation for improved signal reception.
Opretholdelse
- Keep the transmitter clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Store the unit in its protective case when not in use to prevent damage.
- Fjern batterierne, hvis enheden ikke skal bruges i længere tid, for at forhindre lækage.
Fejlfinding
- Enheden tænder ikke: Kontroller, om batterierne er korrekt isat og har tilstrækkelig opladning. Udskift om nødvendigt.
- Blitzen udløses ikke:
- Ensure the transmitter and flash unit are set to the same channel and group.
- Verify the sync cord connection if using one.
- Check the distance between the transmitter and flash unit; ensure it's within the operational range (up to 200m).
- Confirm the flash unit is powered on and ready to fire.
- Intermittent triggering: Try rotating the transmitter for optimal signal reception. Ensure there are no major obstructions between the transmitter and receiver.
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 4.53 x 3.54 x 2.24 tommer |
| Varens vægt | 3.88 ounce |
| Modelnummer | ELC-EL19370 |
| Mærke | Elinchrom |
| Kompatible monteringer | Hot Shoe Mount |
| Flash-synkroniseringshastighed | 1/250 |
| Farve | Sort |
| Oprindelsesland | Kina |
Garanti og support
The Elinchrom EL-Skyport Transmitter Plus comes with a 2-year warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact Elinchrom customer service directly. Refer to the documentation included in your product packaging for specific contact details or visit the official Elinchrom webwebsted.
