VAXCEL T0200

VAXCEL Walsh 2 Light Dusk to Dawn Outdoor Wall Lantern

Model: T0200 | Brand: VAXCEL

Indledning

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your VAXCEL Walsh 2 Light Dusk to Dawn Bronze ADA Dark Sky Outdoor Wall Lantern. Designed for durability and energy efficiency, this fixture enhances the safety and aesthetic appeal of your outdoor spaces. Please read this manual thoroughly before beginning installation or operation.

Sikkerhedsoplysninger

Always adhere to local electrical codes and regulations. Installation should be performed by a qualified electrician if you are unsure about any steps. Disconnect power at the circuit breaker before installation, servicing, or changing bulbs.

Hvad er der i æsken

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

Note: Bulbs are not included and must be purchased separately.

Specifikationer

FeatureDetalje
MærkeVAXCEL
ModelnavnT0200
FarveMørk bronze
MaterialeLegeret stål
StilNutidige
Lysarmatur FormVæg
Produktdimensioner4 cm L x 12 cm B x 4.75 cm H
Indendørs/Udendørs brugUdendørs
StrømkildeHardwired
InstallationstypeVægmonteret
Særlige funktionerDark Sky Compliant, Dusk to Dawn Sensor, Suitable for Indoor and Outdoor Use
LyskildetypeLED kompatibel
Finish TypeMat
Antal lyskilder2
Voltage120 volt
Pære baseE26 medium
Wattage40 watt (maks. pr. pære)
VandmodstandsniveauVandafvisende
Montering påkrævetJa
Varens vægt2.13 pund
CertificeringETL, C ETL Listed

Opsætning og installation

For detaljerede installationsvejledninger henvises til den officielle Installationsmanual (PDF).

General steps for wall-mounted light fixture installation:

  1. Forbered området: Sluk for strømmen ved afbryderen. Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
  2. Fastgør monteringsplade: Fastgør monteringspladen til samledåsen med de medfølgende skruer.
  3. Ledningsforbindelser: Tilslut armaturets ledninger til husets ledninger (sort til sort, hvid til hvid, jord til jord) med møtrikker. Sørg for, at alle forbindelser er sikre.
  4. Monter armaturet: Juster forsigtigt armaturet med monteringspladen, og fastgør det med de medfølgende skruer.
  5. Installer pærer: Insert two E26 medium base bulbs (not included) into the sockets.
  6. Gendan strøm: Tænd for strømmen igen ved afbryderen.
Installed VAXCEL Walsh Outdoor Wall Lantern on a brick wall
The VAXCEL Walsh outdoor wall lantern installed on a brick wall, showcasing its dark bronze finish and sleek design.
Diagram showing product dimensions of the VAXCEL Walsh outdoor wall lantern
A diagram illustrating the key dimensions of the wall lantern: 12 inches wide (A), 4-7/8 inches high (B), and 4 inches deep (C).
Close-up of the photocell sensor on the VAXCEL Walsh outdoor wall lantern
Et nærbillede view highlighting the photocell sensor located on the top of the fixture, responsible for the dusk-to-dawn functionality.

Betjeningsvejledning

Your VAXCEL Walsh outdoor wall lantern is designed for ease of use and energy efficiency.

Skumring til daggry-funktion

This fixture is equipped with a built-in photocell sensor that automatically turns the light on at dusk and off at dawn. This feature provides added safety and security while conserving energy during daylight hours. Ensure the photocell is not obstructed by objects or direct light sources (e.g., other lights, reflections) that could interfere with its operation.

Graphic illustrating the Dusk to Dawn feature of the light fixture
A graphic explaining the Dusk to Dawn feature, showing the light turning on at dusk and off at dawn automatically via a photocell sensor.
Graphic illustrating the Dark Sky Compliant feature of the light fixture
A graphic highlighting the Dark Sky Compliant design, which minimizes upward glare to prevent light pollution, making it an eco-friendly choice.

Kompatible pærer

The fixture uses two E26 medium base bulbs (not included). It is compatible with various bulb types, including Halogen, Incandescent, Vintage Filament, LED, and LED Vintage Filament. For dimmable functionality, ensure your LED bulbs are listed as dimmable and used with a compatible dimmer switch.

Image showing various compatible bulb types for the light fixture
An illustration displaying various compatible bulb types: Halogen, Incandescent, Vintage Filament, LED, and LED Vintage Filament. Note that LED bulbs must be dimmable if used with a dimmer switch.

Opretholdelse

Regular maintenance will ensure the longevity and optimal performance of your light fixture.

Fejlfinding

If you encounter issues with your light fixture, refer to the following common troubleshooting steps:

ProblemMulig årsagLøsning
Lyset tænder ikkeIngen strøm til armaturetCheck circuit breaker, wall switch, and wire connections.
Lyse flimrerLoose bulb or wiring; incompatible dimmer (if applicable)Tighten bulb; check wire connections; ensure dimmer is compatible with LED bulbs.
Dusk to Dawn feature not working correctlyPhotocell obstructed or receiving too much lightEnsure photocell is clear of obstructions and not exposed to other light sources.
Pærer brænder hurtigt udForkert hvadtage; poor ventilationBrug pærer inden for den angivne watttage range; ensure proper air circulation around the fixture.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

Garantioplysninger

This VAXCEL product comes with a Limited Warranty. For specific details regarding the terms and conditions of your warranty, please refer to the documentation included with your purchase or contact VAXCEL customer support.

Kundesupport

For further assistance, product inquiries, or to explore other VAXCEL lighting solutions, please visit the official VAXCEL store:

Visit the VAXCEL Store on Amazon

About VAXCEL Lighting

For over 30 years, VAXCEL has been dedicated to designing and creating lighting and fan solutions that combine timeless style, enduring quality, and practical functionality. Their mission is to help homeowners transform their vision into reality, turning a house into a home.

VAXCEL brand story hero image showing various lighting fixtures in different home settings
A hero image from VAXCEL's brand story, showcasing a variety of their lighting fixtures integrated into diverse home environments, reflecting their commitment to enhancing living spaces.
VAXCEL brand philosophy text: 'It's your life. And when you love your home, life is good. We create lighting for life.'
A visual representation of VAXCEL's brand philosophy, emphasizing the connection between loving one's home and a good life, stating 'We create lighting for life.'

Produkt overview Video

An official video from VAXCEL providing an overview of their lighting products, including indoor, outdoor, and ceiling fan options, showcasing how their designs integrate with various home styles.

Relaterede dokumenter - T0200

Preview Vaxcel T0739 Monterings- og monteringsvejledning
Dette dokument indeholder monterings- og installationsvejledning til Vaxcel T0739-armaturet. Det indeholder en liste over hardwarepakker, trinvis monteringsvejledning, instruktioner til frakobling af valgfri fotocelle og garantioplysninger.
Preview Vaxcel T0571 Monterings- og monteringsvejledning
Detaljerede monterings- og installationsvejledninger til Vaxcel T0571 udendørslampen, inklusive hardwarelister, ledningsdiagrammer og garantioplysninger.
Preview Vaxcel T0804/T0805 Udendørs væglampe med bevægelsessensor: Monterings- og installationsvejledning
Omfattende monterings- og installationsvejledning til Vaxcel T0804 og T0805 udendørs væglamper med bevægelsessensor. Lær, hvordan du installerer, betjener og fejlfinder dit armatur.
Preview Vaxcel T0804/T0805 Outdoor Motion Sensor Wall Sconce: Assembly & Installation Guide
Comprehensive assembly and installation instructions for the Vaxcel T0804 and T0805 outdoor motion sensor wall sconce. Covers features, operation modes, customization, troubleshooting, spare parts, and warranty.
Preview Vaxcel T0694/T0695 Motion Activated Light Installation and Mounting Instructions
This guide provides detailed instructions for installing and operating the Vaxcel T0694/T0695 motion activated outdoor light fixture. It covers important safety information, features, mounting options, sensor and light head adjustments, various operating modes, troubleshooting tips, and warranty details.
Preview Vaxcel T0633/T0634 Outdoor Wall Light Assembly and Installation Instructions
Comprehensive guide for assembling and installing Vaxcel T0633 and T0634 outdoor wall lights. Includes hardware details, step-by-step installation, optional photocell disconnection, spare parts, and dimensions.