NERF N-Strike Elite HyperFire Blaster brugermanual

Indledning

This manual provides essential information for the safe and effective operation of your NERF N-Strike Elite HyperFire Blaster. Please read all instructions carefully before use to ensure proper assembly, operation, and maintenance.

Figure 1: NERF N-Strike Elite HyperFire Blaster packaging, highlighting its rapid-fire capabilities.

Sikkerhedsoplysninger

WARNING: CHOKING HAZARD – Small parts may be generated. Not for children under 3 years.

CAUTION: Do not aim at eyes or face. TO AVOID INJURY: Use only darts designed for this product. Do not modify darts or dart blaster.

• Alder 8 og opefter.
• Kræver 4 D-batterier (medfølger ikke).

Hvad er der i æsken

Your NERF N-Strike Elite HyperFire Blaster package includes the following components:

• 1 x NERF N-Strike Elite HyperFire Blaster
• 1 x 25-dart tromme
• 25 x Elite Darts
• Instruktionsmanual

Figure 2: All components included with the HyperFire Blaster, including the blaster, drum, and darts.

Opsætning

1. Batteriinstallation

The HyperFire Blaster requires 4 "D" size batteries (not included) for motorized operation. Follow these steps to install batteries:

1. Locate the battery compartment on the blaster.
2. Using a Phillips head screwdriver (not included), unscrew the battery compartment cover.
3. Insert 4 "D" size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Sæt batterirummets dæksel på igen og fastgør det med skruen.

2. Indlæsning af dartpile

The blaster comes with a 25-dart drum. Load the Elite darts into the drum as follows:

1. Ensure the drum is detached from the blaster.
2. Insert each Elite dart into the slots of the drum until it is fully seated.
3. Once the drum is loaded, align it with the blaster's dart receiver and push firmly until it clicks into place.

Betjeningsvejledning

Firing the Blaster

The HyperFire Blaster features rapid-fire capabilities. To operate:

1. Ensure batteries are installed and the 25-dart drum is loaded and attached.
2. Hold fast i blasteren med begge hænder.
3. Press and hold the acceleration button (typically located on the handle) to power up the motor. You will hear the motor spin up.
4. While holding the acceleration button, pull the trigger to fire darts. The blaster can unleash up to 5 darts per second.
5. Darts can be fired up to 90 feet (27 meters) under optimal conditions.

Figure 3: Proper hand placement for operating the acceleration button and trigger.

Figure 4: User demonstrating how to hold the HyperFire Blaster.

Opretholdelse

• Rensning: Wipe the blaster with a dry cloth to remove dust and debris. Do not submerge the blaster in water or use harsh chemicals.
• Dart Care: Use only official NERF Elite darts. Darts can become damaged or deformed over time, which may affect performance. Replace worn or damaged darts.
• Opbevaring: Store the blaster in a cool, dry place away from direct sunlight. Remove batteries if the blaster will not be used for an extended period to prevent corrosion.

Fejlfinding

Specifikationer

• Modelnummer: B5573EU4
• Produktdimensioner: 23.62 x 3.94 x 11.81 tommer
• Varens vægt: 4.2 pund
• Anbefalet alder: 8 - 18 år
• Batterier påkrævet: 4 x "D" size batteries (not included)
• Dartkapacitet: 25 dartpile (tromme)
• Brandhastighed: Up to 5 darts per second
• Maks. Rækkevidde: Op til 90 fod (27 meter)
• Fabrikant: Hasbro

Garanti og support

For information om produktgaranti, returnering eller teknisk support henvises til producentens officielle website or contact their customer service directly. Specific warranty terms and support contact details are typically provided with the product packaging or on the manufacturer's official channels.

Fabrikant: Hasbro