Respekta Black Glass Sink 100cm Model NEWYORK100X50S Instruction Manual

Produkt overview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Respekta Black Glass Sink 100cm, model NEWYORK100X50S. This kitchen sink features two stainless steel basins and an integrated black glass draining board, designed for reversible installation in a 60 cm under-cabinet space.

Samlet set view of the Respekta Black Glass Sink, showing the two stainless steel basins and the integrated black glass draining board.

Sikkerhedsoplysninger

• Håndter altid glaskomponenter forsigtigt for at forhindre brud.
• Brug passende personlige værnemidler (PPE) såsom handsker og sikkerhedsbriller under installationen.
• Ensure all plumbing connections are secure and watertight to prevent leaks.
• Do not place excessively heavy objects on the glass draining board. The maximum weight load is 100 kg.
• Avoid sudden temperature changes on the glass surface, although it is temperature resistant up to 180 °C.
• Keep cleaning agents away from children.

Pakkens indhold

• Respekta Black Glass Sink (100cm)
• Basket Valve
• Excenter fitting
• Drain and Overflow Fitting

Specifikationer

Installation

Tjekliste før installation

• Kontroller, at alt indhold i pakken er til stede og ubeskadiget.
• Ensure the countertop opening matches the cut-out dimensions (approximately 61.8 cm x 47 cm).
• Confirm adequate space for a 60 cm under-cabinet installation.
• Gather necessary tools (e.g., sealant, screwdriver, wrench, measuring tape).

The Respekta Black Glass Sink installed in a kitchen countertop, featuring a faucet and showing the two basins and draining area.

Installationstrin

1. Forbered bordpladen: Carefully cut the opening in your countertop according to the specified dimensions. Ensure edges are smooth and clean.
2. Placering af vasken: Place the Respekta Black Glass Sink into the prepared opening. The sink is designed for reversible installation, allowing you to choose the orientation of the basins and draining board.
3. Fastgør vasken: Use appropriate clips or fasteners (not explicitly listed but standard for drop-in sinks) to secure the sink to the countertop. Apply a silicone sealant around the perimeter of the sink to create a watertight seal.
4. Installer vandhane: Mount your kitchen faucet into one of the two pre-punched tap holes. Secure it according to the faucet manufacturer's instructions.
5. Install Drain and Overflow Fittings: Assemble and install the basket valve, excenter fitting, and the drain and overflow fitting into the sink basins. Ensure all connections are tightened properly to prevent leaks.
6. Tilslut VVS: Connect the faucet water supply lines and the drain assembly to your household plumbing. Test for leaks by running water through the faucet and checking all connections.

Underside view of the Respekta Black Glass Sink, illustrating the stainless steel basin construction and the connection points for plumbing.

Bemærk: Professionel installation anbefales for optimale resultater og for at sikre overholdelse af lokale VVS-forskrifter.

Operation

The Respekta Black Glass Sink is designed for standard kitchen use. The two basins allow for versatile tasks such as washing dishes in one basin and rinsing in the other. The integrated draining board provides a convenient area for drying dishes or preparing food.

• Vandflow: Use your installed faucet to control water flow and temperature.
• Dræning: The basket valve in each basin helps to catch food debris, preventing clogs. The excenter fitting allows for remote control of the main drain plug.
• Draining Board: Utilize the glass draining board for air-drying dishes, fruits, or vegetables.

Detaljeret view of the basket valve in one of the stainless steel basins, designed for efficient drainage and debris collection.

Close-up of the excenter fitting control knob, located on the black glass surface next to the basins.

Vedligeholdelse og pleje

Proper care will ensure the longevity and appearance of your Respekta Black Glass Sink.

• Daglig rengøring: After each use, wipe the sink surfaces (glass and stainless steel) with a soft, damp cloth and mild dish soap. Rinse thoroughly with clean water.
• Tørring: As per product instructions, wipe with a dry cloth to prevent water spots and streaks, especially on the black glass surface.
• Pletfjernelse: For stubborn stains on stainless steel, use a non-abrasive stainless steel cleaner. For glass, use a glass cleaner. Always follow the cleaner manufacturer's instructions.
• Undgå slibemidler: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., bleach, ammonia-based cleaners) on either the glass or stainless steel surfaces, as these can cause scratches or damage.
• Undgå ridser: Avoid dragging heavy or sharp objects across the glass draining board.
• Vedligeholdelse af afløb: Regularly clean the basket valves to remove accumulated food debris and prevent blockages.

Fejlfinding

This section addresses common issues you might encounter with your sink.

Garanti og support

For warranty information and customer support regarding your Respekta Black Glass Sink, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Respekta webwebsted for yderligere hjælp.

Gem venligst dit købsbevis for garantikrav.