Dualit Classic 2 Slice NewGen Toaster

Indledning

The Dualit Classic 2 Slice NewGen Toaster is a robust and versatile appliance designed for efficient toasting. Hand-built in the UK, this toaster features durable stainless steel construction, patented ProHeat elements, and a mechanical timer for precise control. It includes functions for defrosting and selecting specific slots for toasting, ensuring optimal results for various bread types.

This manual provides essential information for the safe and effective operation, maintenance, and care of your Dualit toaster.

Vigtige sikkerhedsoplysninger

• Læs alle instruktioner før brug af apparatet.
• Rør ikke ved varme overflader. Brug håndtag eller knopper.
• To protect against electrical hazards, do not immerse cord, plugs, or toaster in water or other liquid.
• Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af ​​børn.
• Træk stikket ud af stikkontakten, når det ikke er i brug, og før rengøring. Lad det køle af, før du sætter dele på eller af.
• Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
• Må ikke bruges udendørs.
• Lad ikke ledningen hænge ud over kanten af ​​bordet eller bordpladen eller røre ved varme overflader.
• Må ikke placeres på eller i nærheden af ​​en varm gas- eller elektrisk brænder eller i en opvarmet ovn.
• Der skal udvises ekstrem forsigtighed ved flytning af et apparat, der indeholder varm olie eller andre varme væsker.
• Brug ikke apparatet til andet end tilsigtet brug.
• For store fødevarer, metalfolieemballager eller bestik må ikke lægges i en brødrister, da de kan forårsage brand eller risiko for elektrisk stød.
• Der kan opstå brand, hvis brødristere er dækket eller rører brandbart materiale, herunder gardiner, gardiner, vægge og lignende, når de er i drift.
• Forsøg ikke at skubbe mad ud, når brødristeren er tilsluttet.
• Always unplug the toaster after use to prevent fire risk.

Opsætning

Udpakning

Carefully remove the toaster and all packaging materials from the box. Retain packaging for future storage or transport if needed.

Placering

Placer brødristeren på en stabil, flad og varmebestandig overflade, væk fra brandfarlige materialer såsom gardiner eller vægge. Sørg for tilstrækkelig ventilation omkring apparatet.

Billede: Bagside view of the toaster with its power cord and plug.

First Use / Conditioning

Before first use, it is recommended to run the toaster through one or two full toasting cycles without any bread. This process helps to condition the new heating elements and burn off any manufacturing residues, which may produce a slight odor or smoke. Ensure the area is well-ventilated during this initial conditioning.

Betjeningsvejledning

Kontrol overview

Image: Labeled diagram of the toaster's controls and features.

• Vælgerkontakt: Located on the top right, this dial allows you to choose which slots are active (e.g., 1 slot, 2 slots, or bagel mode).
• Mekanisk timer: The lower dial on the right side controls the toasting duration. Turn it clockwise to set the desired browning level.
• Manual Ejector Lever: Positioned at the bottom front, this lever is used to lower bread into the slots and manually raise it when toasting is complete or to check progress.
• Afrimningsfunktion: Integrated into the mechanical timer, typically indicated by a snowflake symbol or a specific time setting (e.g., 1 minute) for frozen items.

Ristning af brød

1. Tilbered brød: Insert slices of bread into the toaster slots. For optimal results, ensure the bread fits comfortably without forcing.
2. Select Slots: Use the selector switch to activate the desired number of slots (1 or 2). For single slices, use the leftmost slot.
3. Set Browning: Turn the mechanical timer dial to your preferred browning level. The dial typically has markings for light, medium, and dark.
4. Start med at riste: Push the manual ejector lever down until it locks into place. The heating elements will activate, and the timer will begin to count down.
5. Overvåg fremskridt: You can raise the ejector lever at any time to check the toast's browning without interrupting the cycle. Lower it again to continue toasting.
6. Hent toast: Once the timer completes its cycle, the heating elements will switch off. Push the ejector lever down to raise the toast for retrieval. The toaster is designed to keep toast warm until manually ejected.

Image: Dualit toaster with two slices of toast.

Afrimningsfunktion

To defrost frozen bread before toasting, place the frozen bread in the slots. Set the mechanical timer to the defrost setting (often marked with a snowflake or a specific short duration like 1 minute). After the defrost cycle, wait approximately 20 seconds, then proceed with normal toasting as described above.

Bagel and Bun Function

For bagels or buns, select the appropriate setting on the selector switch. In this mode, typically only the inner heating elements activate, toasting the cut side while gently warming the outer side. Place the cut side of the bagel or bun facing inwards towards the center elements.

Nøglefunktioner

Hand-Built and Fully Repairable

Image: Features collage showing hand-built quality, repairability, and ProHeat elements.

Each Dualit Classic Toaster is hand-assembled in the UK, ensuring high quality and attention to detail. A unique aspect of Dualit toasters is their full repairability; all parts are designed to be replaceable, extending the lifespan of the appliance significantly.

ProHeat Elements

Image: Diagram detailing the benefits of ProHeat elements.

Exclusive to Dualit, ProHeat elements feature a protective, armor-plated layer that makes them highly durable and virtually unbreakable. This design contributes to a longer working life compared to traditional wire elements and ensures a superior, even heat spread for consistent toasting results.

Aftagelig krummebakke

Image: Toaster with its removable crumb tray.

The toaster is equipped with an easy-to-remove crumb tray located at the bottom. This tray collects crumbs during operation, simplifying cleaning and preventing build-up that could pose a fire risk.

Vedligeholdelse og rengøring

Crumb Tray Emptying

Regularly empty the crumb tray to prevent crumb accumulation. To do this, ensure the toaster is unplugged and cool. Pull out the tray from the front bottom of the toaster, discard crumbs, and wipe the tray clean with a damp cloth. Reinsert the tray securely.

Udvendig rengøring

Tør brødristerens yderside af med en blød, tør klud.amp cloth. For stubborn marks on the stainless steel, a non-abrasive cleaner can be used. Do not use harsh chemicals, abrasive pads, or immerse the toaster in water.

Udskiftning af element

One of the unique benefits of the Dualit Classic Toaster is that its ProHeat elements are replaceable. If an element fails, contact Dualit customer support or an authorized service center for replacement parts and instructions. This feature significantly extends the product's lifespan.

Fejlfinding

Specifikationer

Image: Toaster with its dimensions.

Garanti og support

The Dualit Classic 2 Slice NewGen Toaster is designed for longevity and features fully repairable components. For warranty information, service, or to purchase replacement parts (such as ProHeat elements), please contact Dualit customer support directly or visit their official webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For further assistance, please refer to the contact information provided with your product packaging or on the official Dualit webwebsted.