True TUC-60-HC 60-tommer køleskab med to sektioner til underbordsmontering, brugsanvisning

1. Sikkerhedsoplysninger

Please read all instructions carefully before operating the appliance to ensure safe and efficient use. Retain this manual for future reference.

• Elektrisk sikkerhed: Sørg for, at enheden er tilsluttet en korrekt jordet stikkontakt med det korrekte volum.tage as specified on the product label. Do not use extension cords.
• Ventilation: Maintain adequate clearance around the unit for proper ventilation. Blocked vents can lead to overheating and reduced efficiency.
• Tungt apparat: This appliance is heavy. Use appropriate lifting techniques and equipment when moving to prevent injury.
• Rensning: Disconnect power before cleaning or performing any maintenance. Use non-abrasive cleaners.
• Brandfarlige materialer: Opbevar ikke eksplosive stoffer eller brandfarlige materialer inde i eller i nærheden af ​​køleskabet.

2. Produktet er slutview

The True TUC-60-HC is a 60-inch two-section undercounter refrigerator designed for commercial use, featuring solid stainless steel doors and a robust construction for durability and performance.

Front view of the True TUC-60-HC undercounter refrigerator, showcasing its stainless steel finish and two solid doors.

Nøglefunktioner:

• 60-inch width, two-section design
• Solid stainless steel doors
• 15.5 Cubic Feet capacity
• Automatisk afrimningssystem
• Undercounter installation type
• Holdbar rustfri stålkonstruktion

Diagram showing the dimensions of the True TUC-60-HC refrigerator: 60.38 inches width, 30.13 inches depth, and 29.75 inches height.

3. Opsætning

3.1 Udpakning

1. Fjern forsigtigt alle emballagematerialer, inklusive tape og beskyttelsesfilm.
2. Undersøg enheden for eventuelle transportskader. Rapporter eventuelle skader til transportfirmaet med det samme.
3. Fjern al intern emballage og tilbehør.

3.2 Placering

• Place the refrigerator on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation around the unit. Do not block the condenser air intake or exhaust vents.
• Avoid direct sunlight or proximity to heat-generating appliances (ovens, stoves) to maintain optimal performance.

3.3 Elektrisk tilslutning

• Before plugging in, ensure the power supply matches the voltage og amperage requirements listed on the unit's serial tag.
• Plug the unit directly into a dedicated, grounded electrical outlet. Do not use adapter plugs or extension cords.

3.4 Indledende rengøring

• Before first use, clean the interior and exterior surfaces with a mild soap and water solution.
• Tør af med en blød klud.

4. Betjeningsvejledning

4.1 Tænding og temperaturkontrol

1. After setup, plug in the unit. The compressor will start automatically.
2. Allow the refrigerator to run for several hours (typically 2-4 hours) to reach its set temperature before loading products.
3. Temperature settings are typically adjusted via a digital controller located on the front or interior of the unit. Refer to the specific controller's instructions for detailed adjustment procedures.

4.2 Fyldning af køleskabet

• Fordel varerne jævnt på hylderne for at sikre god luftcirkulation.
• Overfyld ikke hylderne ud over deres bæreevne.
• Avoid blocking the internal air vents to maintain consistent temperatures.

4.3 Dørbetjening

• Ensure doors close completely after each use to maintain internal temperature and energy efficiency.
• Check door gaskets regularly for wear or damage that could compromise the seal.

5. Vedligeholdelse

5.1 Regelmæssig rengøring

• Indre: Clean the interior weekly with a mild, non-abrasive cleaner and warm water. Rinse thoroughly and dry.
• Ydre: Wipe down stainless steel surfaces regularly with a soft cloth and a stainless steel cleaner to maintain appearance.
• Kondensatorspole: The condenser coil should be cleaned monthly or quarterly, depending on the operating environment. Disconnect power, locate the coil (usually at the rear or bottom), and use a brush or vacuum cleaner to remove dust and debris. A dirty coil reduces efficiency and can lead to compressor failure.

5.2 Pakningsinspektion

• Inspect door gaskets monthly for cracks, tears, or stiffness. Damaged gaskets can lead to air leaks and increased energy consumption.
• Clean gaskets with warm, soapy water to keep them pliable and ensure a good seal.

5.3 Automatisk afrimning

This unit features an automatic defrost system, eliminating the need for manual defrosting. Ensure the drain pan is clear and the drain line is not obstructed to allow proper water evaporation.

6. Fejlfinding

Før du kontakter service,view disse almindelige problemer og løsninger:

7. Specifikationer

8. Garanti og support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official TRUE webKontaktoplysninger til kundeservice findes typisk på producentens hjemmeside. webwebsted.