Brugermanual til TC CP-40S laserafstandsmåler

Indledning

Tak for købetasing the TC CP-40S Laser Distance Meter. This device is designed for precise and rapid measurement of distances, areas, and volumes. It is an ideal tool for various applications in construction, real estate, and other industries requiring accurate measurements. Please read this manual carefully before using the device to ensure safe and optimal operation.

Nøglefunktioner:

• High accuracy with a wide measuring range up to 40 meters.
• Quick measurement of distance, area, and volume with a single button operation.
• Automatic calculation functions for area and volume.
• Indirect measurement using the Pythagorean theorem.
• Minimum/Maximum distance tracking.
• Easy addition and subtraction of measurements.
• Selectable measurement reference point (front or rear benchmark).
• Switchable units: meters (m), inches (in), and feet (ft).
• Bright laser pointer for easy targeting.
• Large LCD with backlight and multi-line display (4 lines).
• Automatic correction and error reporting technology.
• Lavt batteri indikation.
• Automatic and manual power-off functions.
• Compact, handheld, and portable design.

Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle varer er til stede og i god stand:

• 1 x TC CP-40S Laser Distance Meter
• 1 x bærbar pose
• 1 x Hængereb
• 1 x Brugermanual (dette dokument)

Image: The TC CP-40S Laser Distance Meter shown alongside its retail packaging and the included hanging rope, demonstrating the complete package contents.

Sikkerhedsinstruktioner

This device uses a Class 2 laser. Please observe the following safety precautions:

• GØR IKKE stirre direkte ind i laserstrålen.
• GØR IKKE point the laser beam at people or animals.
• Undgå direkte øjeneksponering for laserstrålen.
• Opbevar enheden utilgængeligt for børn.
• Do not attempt to modify or disassemble the device. Unauthorized modifications can lead to hazardous laser radiation exposure.
• Use only the specified battery type (2 x 1.5V AAA).
• Do not operate the device in explosive environments or near flammable liquids or gases.
• Sørg for, at enheden er ren og tør før brug.

Image: A side and back view of the laser distance meter, highlighting the yellow caution label with laser safety warnings and specifications.

Opsætning

Installation af batteri

The TC CP-40S requires two 1.5V AAA batteries (not included) for operation.

1. Find batteridækslet på bagsiden af ​​enheden.
2. Skub dækslet nedad for at åbne rummet.
3. Isæt to AAA-batterier, og sørg for at polerne (+ og -) vender korrekt som angivet i batterirummet.
4. Luk batteridækslet ved at skubbe det opad, indtil det klikker på plads.

Image: The back of the laser distance meter with the battery compartment cover removed, showing the two empty AAA battery slots and spring contacts.

Attaching the Hanging Rope

The included hanging rope can be attached to the device for convenient carrying and to prevent accidental drops.

1. Locate the small loop hole on the side or bottom of the device.
2. Thread the thin end of the hanging rope through the loop hole.
3. Pass the larger loop of the rope over the device and pull it tight to secure.

Betjeningsvejledning

Enhed overview og knapper

Billede: Forside view of the TC CP-40S Laser Distance Meter, displaying its LCD screen, control buttons, and laser aperture.

Familiarize yourself with the device's buttons:

• ON/MEAS (Red Button): Powers on the device, initiates single measurement, or starts continuous measurement.
• + (Plus Button): Adds measurements, navigates up in menus.
• - (Minus Button): Subtracts measurements, navigates down in menus.
• UNIT knap: Changes measurement units (m, ft, in).
• Function Button (Cube Icon): Toggles between distance, area, volume, and Pythagorean measurement modes.
• Reference Point Button (Arrows Icon): Switches between front and rear measurement reference points.
• CLR/OFF (Red Button): Clears the current measurement, exits a function, or powers off the device (long press).

Tænd/sluk

• For at tænde: Tryk på ON/MEAS button. The backlight will illuminate, and the device will be ready for use.
• For at slukke: Tryk og hold på CLR/OFF button for a few seconds. The device also features an automatic power-off function after 150 seconds of inactivity to conserve battery life.

Ændring af måleenheder

Tryk på ENHED button repeatedly to cycle through the available measurement units: meters (m), feet (ft), and inches (in).

Indstilling af målereferencepunkt

The device can measure from its front edge or its rear edge. Press the Referencepunkt button (arrows icon) to toggle between these two options. The display will show an icon indicating the current reference point.

Enkelt afstandsmåling

1. Sørg for, at enheden er tændt.
2. Ret laseren mod måloverfladen.
3. Tryk på ON/MEAS tryk én gang på knappen. Laseren aktiveres.
4. Tryk på ON/MEAS Tryk på knappen igen for at foretage målingen. Resultatet vises på skærmen.

Arealmåling

1. Tryk på Fungere button (cube icon) until the area icon (rectangle) appears on the display.
2. Measure the first side (e.g., length) by pressing ON/MEAS.
3. Measure the second side (e.g., width) by pressing ON/MEAS igen.
4. Enheden beregner og viser automatisk arealet.

Volumenmåling

1. Tryk på Fungere button (cube icon) until the volume icon (3D cube) appears on the display.
2. Mål længden ved at trykke på ON/MEAS.
3. Mål bredden ved at trykke på ON/MEAS.
4. Mål højden ved at trykke på ON/MEAS.
5. Enheden beregner og viser automatisk volumen.

Pythagorean Measurement (Indirect Measurement)

This mode allows you to calculate inaccessible heights or distances using two or three measurements based on the Pythagorean theorem.

1. Tryk på Fungere button (cube icon) until the desired Pythagorean mode icon appears (e.g., triangle with one unknown side).
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. Enheden vil beregne og vise den ukendte side.

Addition og subtraktion af målinger

After taking a measurement:

• Tryk på + button to add the next measurement to the current one.
• Tryk på - button to subtract the next measurement from the current one.
• Take the next measurement by pressing ON/MEAS. The result will be updated.

Min/Max Distance Tracking (Continuous Measurement)

1. Tryk og hold på ON/MEAS knappen. Enheden vil gå i kontinuerlig måletilstand.
2. Move the device slowly towards or away from the target. The display will show the current distance, along with the minimum and maximum distances recorded during the session.
3. Trykke CLR/OFF or ON/MEAS for at afslutte kontinuerlig måling.

Opretholdelse

• Rensning: Brug en blød, damp klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at laserlinsen er ren og fri for støv for at opnå nøjagtige målinger.
• Opbevaring: When not in use for extended periods, remove the batteries to prevent leakage. Store the device in its portable pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
• Udskiftning af batteri: Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
• Undgå dråber: While the device is designed to be robust, avoid dropping it or subjecting it to strong impacts, which can affect its calibration and functionality.

Fejlfinding

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official TC webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

This product is designed for general measurement purposes. For professional or critical applications, always cross-verify measurements with other calibrated instruments.