1. Introduktion
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOOLCRAFT TC4636 10-inch Miter Saw. Please read this manual thoroughly before operating the tool to ensure proper use and to prevent injury or damage.
2. Generelle sikkerhedsinstruktioner
Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade. Gem denne manual til senere brug.
- Bær passende personlige værnemidler (PPE), herunder sikkerhedsbriller, høreværn og støvmaske.
- Sørg for, at arbejdsområdet er rent, godt oplyst og fri for forhindringer.
- Hold børn og omkringstående væk fra betjeningsområdet.
- Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af brændbare væsker, gasser eller støv.
- Tag altid stikket ud af stikkontakten, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
- Brug den korrekte klinge til det materiale, der skal skæres. Sørg for, at klingen er skarp og fri for skader.
- Secure the workpiece firmly before cutting. Never hold the workpiece by hand.
- Avoid awkward body positions. Maintain proper footing and balance at all times.
- Do not force the tool. Allow the saw to reach full speed before beginning a cut.
- Undersøg regelmæssigt netledningen for skader. Hvis den er beskadiget, skal den repareres af en kvalificeret tekniker.
3. Produktkomponenter
Familiarize yourself with the main parts of your miter saw.
Figur 1: Overview of the TOOLCRAFT TC4636 10-inch Miter Saw. This image displays the complete miter saw unit, including the motor housing, blade guard, cutting table, fence, and base. The dust collection bag is visible at the rear of the motor housing.
- Motorhus: Contains the motor and drive mechanism.
- Bladbeskytter: Trækker sig tilbage under skæring for at blotlægge bladet og dækker det, når det ikke er i brug.
- Cutting Table/Base: Provides a stable surface for the workpiece.
- Hegn: Supports the workpiece against the blade.
- Justering af geringsvinkel: Mechanism for setting the horizontal cutting angle.
- Affasningsvinkeljustering: Mechanism for setting the vertical cutting angle.
- Støvopsamlingspose: Attaches to the dust port to collect sawdust.
- Forlængerstænger: Provide additional support for longer workpieces.
- Emne Clamp (Trykke): Sikrer emnet under skæring.
- Blade Wrench (Key): Used for changing the saw blade.
4. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Model | TC4636 |
| Diskens diameter | 10 tommer (254 mm) |
| Magt | 2000 W |
| Voltage | 127 V AC - 60 Hz |
| Strøm | 16.6 A |
| Motorhastighed | 4500 RPM |
| Cutting Capacity (0°/0°) | 340 x 104 mm |
| Cutting Capacity (45°/0°) | 240 x 104 mm |
| Cutting Capacity (0°/45°) | 340 x 55 mm |
| Cutting Capacity (45°/45°) | 240 x 55 mm |
| Skrå vinkel | 45° højre |
| Inkluderet tilbehør | 60-tooth disc, dust collection bag, 2 extension bars, workpiece clamp, blade wrench |
| Varens vægt | 26 kilo |
| Produktdimensioner | 91 x 58 x 53 cm |
5. Opsætning og montering
Before operating the miter saw, ensure it is properly assembled and secured.
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Kontroller, at alt anført tilbehør er til stede.
- Montering: Secure the miter saw to a stable workbench using bolts through the mounting holes in the base. This prevents movement during operation.
- Installing Extension Bars: Insert the two extension bars into their designated slots on the saw base. Tighten the locking knobs to secure them. These provide additional support for longer workpieces.
- Montering af støvopsamlingspose: Connect the dust collection bag to the dust port located at the rear of the blade housing. Ensure it is securely fastened to minimize dust dispersion.
- Montering af kniv (hvis ikke forudinstalleret):
- Afbryd saven fra strømkilden.
- Løft den nederste klingebeskyttelse.
- Use the provided blade wrench to loosen the arbor nut while holding the arbor lock button.
- Place the 60-tooth disc onto the arbor, ensuring the teeth are pointing downwards towards the front of the saw.
- Re-tighten the arbor nut securely.
- Emne Clamp (Press) Installation: Fastgør emnet clamp to the saw table. It can be adjusted to hold various workpiece sizes.
6. Betjeningsvejledning
Følg disse trin for sikker og effektiv betjening af din geringssav.
- Strømtilslutning: Connect the saw to a 127V AC, 60Hz power outlet. Ensure the circuit can handle the 16.6A current draw.
- Justering af geringsvinkel:
- Løsn geringslåsehåndtaget.
- Rotate the turntable to the desired angle (e.g., 0°, 45°). The scale indicates the angle.
- Tighten the miter lock handle to secure the angle.
- Justering af skråvinkel:
- Løsn skrålåseknappen.
- Tilt the saw head to the desired bevel angle (up to 45° right).
- Spænd skrålåseknappen.
- Placering af emne:
- Place the workpiece firmly against the fence and the saw table.
- Use the extension bars for support if the workpiece is long.
- Secure the workpiece with the workpiece clamp to prevent movement during the cut.
- Laver et snit:
- Ensure the blade is clear of the workpiece before starting the motor.
- Press the power switch to start the saw. Allow the blade to reach full speed (4500 RPM).
- Slowly and steadily lower the saw head through the workpiece. Do not force the cut.
- Når savningen er færdig, slip tænd/sluk-knappen og lad klingen stoppe helt, før savhovedet hæves.
- Wait for the blade to stop before removing the workpiece or clearing sawdust.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din geringsavs lange levetid og sikker drift.
- Rensning: After each use, disconnect the power and clean the saw. Remove sawdust and debris from the motor vents, blade guard, and table using a brush or compressed air.
- Bladinspektion: Undersøg savklingen regelmæssigt for skarphed, revner eller manglende tænder. Udskift sløve eller beskadigede klinger med det samme.
- Smøring: Apply a light coat of machine oil to moving parts and pivot points as needed to ensure smooth operation.
- Kulbørster: Check carbon brushes periodically. If worn down, replace them with genuine TOOLCRAFT replacement parts. Refer to a qualified service technician if unsure.
- Strømledning: Inspect the power cord for any cuts, abrasions, or damage. Do not use the saw if the cord is damaged.
- Opbevaring: Store the miter saw in a clean, dry, and secure location, out of reach of children.
8. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Saven starter ikke | No power supply; faulty switch; worn carbon brushes | Check power connection and circuit breaker; test switch; replace carbon brushes |
| Klingen sidder fast i emnet | Dull blade; improper workpiece support; forcing the cut | Replace blade; ensure workpiece is securely clamped; reduce feed rate |
| Overdreven vibration | Loose blade; damaged blade; saw not securely mounted | Tighten blade arbor nut; replace damaged blade; secure saw to workbench |
| Poor cut quality (rough cuts, splintering) | Dull blade; incorrect blade type for material; too fast feed rate | Replace or sharpen blade; use appropriate blade; slow down cutting speed |
9. Garanti og support
For warranty information, technical support, or to order replacement parts, please contact TOOLCRAFT customer service. Keep your purchase receipt as proof of purchase.
Fabrikant: VÆRKTØJSGÅND
Please refer to the official TOOLCRAFT website or your point of purchase for the most current contact information and warranty details.
