Sceptre IPS 34-inch UltraWide Monitor User Manual

Indledning

Tak for købetasing the Sceptre IPS 34-inch UltraWide Monitor. This manual provides essential information for setting up, operating, and maintaining your monitor to ensure optimal performance and longevity. Please read this manual thoroughly before using your new monitor.

Opsætning

1. Udpakning og pakkeindhold

Carefully remove the monitor and all accessories from the packaging. Ensure all items listed below are present:

• Sceptre IPS 34-inch UltraWide Monitor
• Monitorstativ (base og hals)
• Strømadapter og strømkabel
• DisplayPort-kabel
• HDMI kabel
• USB-C kabel
• Brugervejledning (dette dokument)
• Skruer til montering af stativ
• 2 AAA batteries (for remote control, if included)

2. Montering af stativ

Sådan samles skærmstativet:

1. Fastgør stativets hals til skærmpanelet med de medfølgende skruer.
2. Secure the stand base to the stand neck using the remaining screws.
3. Placer den samlede skærm på en stabil, plan overflade.

Figure 1: The monitor stand allows for height, tilt, and swivel adjustments for optimal viewkomfort.

3. VESA-montering (valgfrit)

The Sceptre E345B-QUN168W monitor is VESA compatible, allowing it to be mounted on a wall or an articulating arm (mount sold separately). Follow the instructions provided with your VESA mount for proper installation. Ensure the VESA mount is rated to support the monitor's weight (20.9 pounds).

4. Tilslutningskabler

Tilslut de nødvendige kabler til din skærm og computer:

• Magt: Connect the power adapter to the monitor's DC input and then plug the power cable into a power outlet.
• Video: Connect one end of the DisplayPort, HDMI, or USB-C cable to the corresponding port on your monitor and the other end to your computer's video output.
• USB-hub: Connect the USB-B 3.0 upstream cable from the monitor to your computer to enable the monitor's USB-A 3.0 ports.
• Lyd: Hvis det ønskes, kan du tilslutte hovedtelefoner eller eksterne højttalere til 3.5 mm lydudgangsstikket på skærmen.

Figur 2: Bagside view illustrating the monitor's connectivity options, including multiple HDMI, DisplayPort, USB-C, and USB-A ports.

Betjening af monitoren

1. Tænd/sluk

Press the power button (usually a joystick or dedicated button on the bottom/rear of the monitor) to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.

2. On-Screen Display (OSD) menu

The OSD menu allows you to adjust various monitor settings. Use the joystick/buttons to navigate the menu:

• Billedindstillinger: Adjust brightness, contrast, sharpness, color temperature, and HDR modes.
• Skærmindstillinger: Configure aspect ratio, input source, and FreeSync Premium.
• Lydindstillinger: Styr lydstyrke og slå lyd fra.
• PIP/PBP: Enable Picture-in-Picture or Picture-by-Picture modes to view flere kilder samtidigt.
• Systemindstillinger: Access language, OSD timeout, and factory reset options.

Figure 3: The monitor supports Picture-in-Picture (PIP) and Picture-by-Picture (PBP) functions, allowing multiple video sources to be displayed simultaneously for enhanced multitasking.

3. Nøglefunktioner

• 144 Hz opdateringshastighed: Provides smooth visuals, especially beneficial for fast-paced gaming.
• 1ms MPRT: Minimizes motion blur for crisp imagery.
• HDR400: Enhances dynamic contrast and color vibrancy.
• AMD FreeSync Premium: Synchronizes refresh rates to eliminate screen tearing and stuttering.
• IPS panel: Offers consistent color performance and wide viewing vinkler.

Opretholdelse

To ensure the longevity and optimal performance of your Sceptre monitor, follow these maintenance guidelines:

• Rengøring af skærmen: Tør forsigtigt skærmen af ​​med en blød, fnugfri klud. Brug en skærmspecifik rengøringsopløsning på kluden, ikke direkte på skærmen, til genstridige pletter.
• Rengøring af Casing: Brug en blød, tør klud til at rengøre skærmens casing. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Ventilation: Sørg for, at skærmens ventilationsåbninger ikke er blokerede for at forhindre overophedning.
• Sluk, når den ikke er i brug: Sluk skærmen, når den ikke er i brug i længere perioder, for at spare energi og forlænge dens levetid.

Fejlfinding

Hvis du støder på problemer med din skærm, kan du se følgende almindelige fejlfindingstrin:

• Ingen strøm: Kontroller, om strømkablet er korrekt tilsluttet til både skærmen og stikkontakten. Sørg for, at stikkontakten fungerer.
• Intet signal: Verify that the video cable (DisplayPort, HDMI, or USB-C) is correctly connected to both the monitor and your computer. Ensure the correct input source is selected in the OSD menu.
• Flimrende/forvrænget billede: Check the video cable for damage. Try a different cable or port. Ensure your graphics card drivers are up to date.
• Knapper reagerer ikke: Try resetting the monitor to factory defaults via the OSD menu.
• Lydproblemer: Check the volume settings in the OSD menu and on your computer. Ensure external speakers or headphones are properly connected.

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Sceptre webwebsted. Gem din købsbevis i tilfælde af garantikrav.