1. Introduktion
This manual provides essential information for the safe and efficient operation of your TROTEC Convector Heater TCH 20 E. Please read these instructions carefully before using the appliance and keep them for future reference.
The TROTEC Convector Heater TCH 20 E is designed to provide quick and easy heating for indoor spaces. It functions as an optimal heating solution for various scenarios, including supplementary heating, transitional heating, or heating rooms not connected to central heating systems. The device operates by heating the air inside, which then rises, creating a natural circulation of warm air throughout the room.
Figur 1: Forside view of the TROTEC Convector Heater TCH 20 E, showcasing dens kompakte design og kontrolpanel.
2. Sikkerhedsinstruktioner
ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i brand, elektrisk stød eller personskade.
- Read all instructions thoroughly before operating the heater.
- Sørg for, at voltagDen strømstyrke, der er angivet på typeskiltet, svarer til din elnetstrøm.tage før tilslutning af apparatet.
- Do not cover the heater. Covering the heater can cause overheating and create a fire hazard.
- Keep the heater away from water and do not use it in bathrooms, laundry areas, or similar wet locations.
- Do not insert any objects into the heater's openings. This can cause electric shock, fire, or damage to the heater.
- Tag altid stikket ud af stikkontakten, når varmeapparatet ikke er i brug, eller før rengøring.
- Hold børn og kæledyr væk fra varmeapparatet, især når det er i drift.
- Place the heater on a stable, level surface to prevent tipping.
- Maintain a minimum distance of 1 meter (3 feet) from flammable materials such as curtains, furniture, and other combustible items.
- Do not use the heater with an external timer, programmer, or any other device that switches the heater on automatically, as a fire risk exists if the heater is covered or positioned incorrectly.
- Dette apparat er kun til indendørs brug.
3. Opsætning og installation
- Udpakning: Tag forsigtigt varmelegemet ud af emballagen. Gem emballagen til senere opbevaring eller transport.
- Placering: Place the heater on a firm, level, and heat-resistant surface. Ensure there is adequate clearance around the heater for proper air circulation. Do not place it directly under a power outlet.
- Strømtilslutning: Plug the power cord into a suitable 230V electrical outlet. Ensure the outlet is easily accessible.
Figure 2: Dimensions of the TROTEC Convector Heater TCH 20 E, showing its compact size for easy placement.
4. Betjeningsvejledning
The TCH 20 E Convector Heater features multiple power settings and a thermostat for precise temperature control.
4.1 Kontrolpanel overview
Figur 3: Forside view of the heater, highlighting the power switches and thermostat knob.
Figur 4: Side view of the heater, providing a clearer perspective of the control panel layout.
4.2 Strømindstillinger
The heater offers three heat levels, controlled by two rocker switches on the side panel:
- Switch 1 (Bottom): Activates 750W heating power.
- Switch 2 (Top): Activates 1250W heating power.
- Both Switches On: Activates the maximum 2000W heating power (750W + 1250W).
Figur 5: Detaljeret view of the two power switches, indicating their respective wattage indstillinger.
4.3 Termostatstyring
The steplessly adjustable thermostat knob allows you to set your desired room temperature. Once the pre-set temperature is reached, the device will automatically turn off. It will switch on again if the room temperature falls below the set level.
- Turn the knob towards "MIN" for lower temperatures.
- Turn the knob towards "MAX" for higher temperatures.
Figure 6: Close-up of the thermostat control knob, ranging from MIN to MAX settings.
4.4 Frost Protection Feature
The TCH 20 E includes a frost guard feature. When activated (usually by setting the thermostat to its lowest setting with a snowflake symbol), the heater will automatically turn on if the room temperature drops below a certain point (typically around 5°C / 41°F) to prevent freezing.
4.5 Overophedningsbeskyttelse
For safety, the heater is equipped with an integrated overheat protection system. If the heater's internal components reach an unsafe temperature, the device will automatically shut off. If this occurs, unplug the heater, allow it to cool down, and check for any obstructions around the air inlets or outlets before restarting.
5. Vedligeholdelse og rengøring
WARNING: Always unplug the heater from the power outlet and allow it to cool completely before performing any maintenance or cleaning.
- Udvendig rengøring: Tør varmeapparatets udvendige overflader af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen.
- Luftventiler: Periodically check the air inlet and outlet grilles for dust and debris. Use a vacuum cleaner with a brush attachment to gently remove any accumulations. Ensure the vents are clear to maintain proper airflow and prevent overheating.
- Nedsænk ikke varmeren i vand eller anden væske.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | Ingen strømforsyning. Termostat indstillet for lavt. Overophedningsbeskyttelse aktiveret. | Kontroller, om netledningen er tilsluttet korrekt, og om stikkontakten fungerer. Øg termostatindstillingen. Tag stikket ud, lad det køle af, kontroller for blokeringer, og genstart derefter. |
| Varmeapparatet producerer utilstrækkelig varme. | Lav strømindstilling valgt. Termostat indstillet for lavt. Rummet er for stort i forhold til varmelegemets kapacitet. | Select a higher power setting (1250W or 2000W). Øg termostatindstillingen. Consider using additional heating or a higher capacity heater for larger rooms. |
| Varmeapparatet slukker pludselig. | Desired temperature reached (thermostat). Overophedningsbeskyttelse aktiveret. | This is normal operation. The heater will restart when the temperature drops. Tag stikket ud, lad det køle af, kontroller for blokeringer, og genstart derefter. |
7. Tekniske specifikationer
- Model: TCH 20 E
- Mærke: Trotec
- Varmekraft: 750 W / 1250 W / 2000 W
- Voltage: 230 volt
- Antal hastigheder: 3 (corresponding to power settings)
- Produktmål (L x B x H): 52 cm x 13.3 cm x 39 cm (ca. 20.5 x 5.2 x 15.4 tommer)
- Vægt: 2 kg (ca. 4.4 lbs)
- Særlige funktioner: Noiseless operation, Thermostat control, Frost protection, Overheat protection
- Opvarmningsmetode: Konvektion
- Monteringstype: Gulvmontering
- Varemodelnummer: 1410000510
8. Opbevaring
When not in use for extended periods, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
9. Bortskaffelse
Bortskaf ikke elektriske apparater som usorteret husholdningsaffald. Brug separate indsamlingsfaciliteter. Kontakt din kommune for information om tilgængelige indsamlingssystemer. Hvis elektriske apparater bortskaffes på lossepladser eller lossepladser, kan farlige stoffer sive ud i grundvandet og komme ind i fødekæden, hvilket skader dit helbred og velbefindende.
10. Garanti og support
For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.
