Klipsch RW-5802 II IW SUB Indbygget Subwoofer Brugsanvisning

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Klipsch RW-5802 II IW SUB In-Wall Subwoofer. The RW-5802 II IW SUB is designed to deliver powerful low-frequency effects for architectural home theater or two-channel audio systems, integrating seamlessly into your wall space. For optimal performance, it is recommended to pair this subwoofer with the Klipsch RSA-500 dedicated subwoofer amplivligere.

2. Sikkerhedsinstruktioner

Please read all safety instructions carefully before installing or operating the Klipsch RW-5802 II IW SUB In-Wall Subwoofer. Retain this manual for future reference.

Elektrisk sikkerhed: Ensure all wiring is performed by a qualified professional and complies with local electrical codes. Disconnect power to the installation area before beginning any wiring.
Amplifier kompatibilitet: Use only with a compatible external subwoofer amplifier, such as the Klipsch RSA-500, that meets the power handling requirements of the RW-5802 II IW SUB. Overpowering the subwoofer can cause damage.
Installation placering: Install the subwoofer in a wall cavity free from electrical wires, plumbing, or other obstructions. Ensure the wall material can adequately support the weight of the subwoofer.
Vibration: High bass output can cause wall vibrations. Consider reinforcing the wall structure around the installation area to prevent rattles and buzzes.
Fugtighed: This product is not waterproof. Do not install in areas exposed to moisture or extreme humidity.
Rensning: Brug en tør, blød klud til rengøring. Brug ikke flydende rengøringsmidler eller aerosoler.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

Klipsch RW-5802 II IW SUB In-Wall Subwoofer Unit
Paintable Magnetic Steel Grille
Installationsskabelon
Instruktionsmanual (dette dokument)

4. Opsætning og installation

Proper installation is crucial for optimal performance and safety. If you are unsure about any step, consult a qualified installer.

4.1 Planning the Installation Location

Vægtype: The RW-5802 II IW SUB is designed for standard drywall construction. Ensure the wall cavity is clear of studs, electrical conduits, plumbing, and HVAC ducts.
Stiftplacering: Use a stud finder to locate wall studs. The subwoofer requires a clear opening between studs.
Ledningssti: Plan the route for speaker wire from your amplifier to the subwoofer location. Ensure adequate length and gauge of wire.
Akustik: Consider room acoustics and desired bass distribution when selecting the installation point.

4.2 Cutting the Wall Opening

Using the provided installation template, carefully trace the cutout dimensions onto the wall at your chosen location.
Before cutting, double-check for any obstructions behind the wall using a small pilot hole or inspection camera.
Using a drywall saw or utility knife, carefully cut along the traced line to create the opening.

4.3 Ledningsforbindelser

Før du foretager nogen tilslutninger, skal du sørge for din ampApparatet er slukket og taget ud af stikkontakten.

Run appropriate gauge speaker wire (e.g., 14-gauge or thicker for longer runs) from your dedicated subwoofer amplifier to the wall opening.
Strip approximately 1/2 inch (12mm) of insulation from the ends of the speaker wires.
Connect the speaker wires to the binding posts on the back of the RW-5802 II IW SUB. Ensure correct polarity: positive (+) from the amplifier to positive (+) on the subwoofer, and negative (-) to negative (-).
Spænd bindingsstolperne godt fast for at sikre en god forbindelse.

4.4 Montering af subwooferen

Klipsch RW-5802 II IW SUB In-Wall Subwoofer with dual 8-inch Cerametallic woofers

Figur 1: Front view of the Klipsch RW-5802 II IW SUB In-Wall Subwoofer, showcasing its dual 8-inch Cerametallic woofers. This unit is designed for discreet in-wall installation.

Carefully insert the subwoofer into the wall opening.
The RW-5802 II IW SUB features dog-leg mounting clamps. Turn the screws on the front baffle of the subwoofer clockwise. This will rotate the clamps outwards and tighten them against the inside of the drywall.
Tighten the screws until the subwoofer is snug and secure in the wall. Do not overtighten, as this can damage the drywall or the subwoofer frame.
Once the subwoofer is securely mounted, attach the paintable magnetic steel grille. The grille will snap into place magnetically.

5. Betjeningsvejledning

The Klipsch RW-5802 II IW SUB is a passive subwoofer and requires an external ampløfter til drift.

Ensure all connections between the subwoofer and your ampLifier er sikre.
Connect your dedicated subwoofer amplifier (e.g., Klipsch RSA-500) to your audio receiver or pre-amplifier's subwoofer output (LFE or Sub Out).
Tilslut og tænd for din amplivligere.
Adjust the volume, crossover frequency, and phase settings on your amplifier according to your room acoustics and personal preference. Refer to your amplifier's instruction manual for detailed adjustment procedures.
Begin with low volume levels and gradually increase to avoid sudden loud sounds.

6. Vedligeholdelse

The Klipsch RW-5802 II IW SUB requires minimal maintenance.

Rensning: Use a soft, dry cloth to gently wipe the grille and surrounding areas. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
Gitter: The magnetic grille can be removed for cleaning or painting. Ensure it is reattached securely after any maintenance.
Inspektion: Periodically check the mounting screws to ensure the subwoofer remains securely fastened in the wall.

7. Fejlfinding

If you experience issues with your Klipsch RW-5802 II IW SUB, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Ingen lyd fra subwooferen	AmpLifieren er ikke tændt. Forkert ledningsføring eller løse forbindelser. Amplifier input/output settings incorrect. Kildeenheden sender ikke signal.	Sikre amplifier is powered on and connected. Check all speaker wire connections for correct polarity and tightness. Verificere amplifier settings (volume, crossover, input selection). Confirm audio source is playing and connected correctly to the amplivligere.
Distorted or Unclear Bass	AmpLifier-volumen er for høj. Forkert delefrekvens. Subwoofer phase setting incorrect. Wall vibrations.	Reducere amplifier volumen. Juster delefrekvensen på amplifier til at blande sig med hovedhøjttalerne. Experiment with the phase setting (0° or 180°) on the amplivligere. Inspect wall for loose fixtures or inadequate reinforcement.
Rattling or Buzzing Sound	Løse monteringsskruer. Objects vibrating within the wall cavity. Grille not properly seated.	Spænd monteringsskruerne forsigtigt. Check for and secure any loose items in the wall. Ensure the magnetic grille is fully seated.

8. Specifikationer

Key technical specifications for the Klipsch RW-5802 II IW SUB In-Wall Subwoofer:

Højttalertype: In-Wall Subwoofer
Woofer: Dobbelte 8-tommer cerametalliske bashøjttalere
Indkapsling: Sealed Integrated Enclosure
Impedans: 8 Ohm
Strømhåndtering: Up to 500 Watts (Peak)
Forbindelse: Speaker Wire (Wired)
Produktdimensioner: 3.7 x 11.8 x 20.8 tommer (dybde x bredde x højde)
Varens vægt: 22 pund
Gitter: Flat, Magnetic, Paintable Steel
Modelnummer: RW-5802 II IW SUB
UPC: 743878029581

9. Garanti og support

The Klipsch RW-5802 II IW SUB In-Wall Subwoofer is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Klipsch webwebsted.

For technical support, troubleshooting assistance, or to inquire about service, please contact Klipsch customer support through their official webwebstedet eller kontaktoplysningerne i din produktdokumentation.

Klipsch Officiel Webwebsted: www.klipsch.com

	Klipsch R-120SWi Reference Subwoofer Brugermanual Brugermanual til Klipsch R-120SWi Reference Subwoofer, der dækker inspektion, placering, betjening, kabelbaserede og trådløse forbindelser, pleje og produktregistrering. Lær, hvordan du opsætter og bruger din Klipsch subwoofer for optimal lydgengivelse.
	Klipsch Flexus Core 300 Soundbar brugermanual Brugermanual til Klipsch Flexus Core 300 soundbaren, der beskriver dens funktioner, opsætning og betjening. Lær om Klipsch Connect Plus-appen, soundbarens betjeningselementer, tilslutningsmuligheder og LED-lysstyrke.
	Klipsch Reference Subwoofers brugervejledning Officiel brugermanual til Klipsch Reference subwoofere (R-8SW, R-10SW, R-12SW). Lær om opsætning, tilslutninger, betjeningselementer, placering og pleje af dit Klipsch-lydsystem.
	Klipsch ProMedia Lumina Computer Speakers User Manual Comprehensive user manual for the Klipsch ProMedia Lumina computer speaker system, detailing setup, connections, features, lighting control, troubleshooting, and warranty information.
	Klipsch Reference Subwoofers brugervejledning Brugermanual til Klipsch Reference Series subwoofere, inklusive modellerne R-10SW og R-12SW. Indeholder instruktioner om opsætning, tilslutning, styring og vedligeholdelse for optimal lydgengivelse.
	Klipsch Flexus Sub 200 brugermanual Denne manual indeholder omfattende instruktioner til opsætning, betjening og fejlfinding af den trådløse subwoofer Klipsch Flexus Sub 200. Lær om dens funktioner, tilslutningsmuligheder og placering for optimal lydgengivelse.