Nerf cs-6

Nerf N-Strike Elite Alpha Trooper CS-6 Mission Kit Instruction Manual

Model: CS-6

1. Introduktion

Welcome to the world of Nerf N-Strike Elite! The Alpha Trooper CS-6 Mission Kit is a pump-action blaster designed for rapid-fire dart blasting. This manual provides essential information for safe assembly, operation, maintenance, and troubleshooting of your new blaster.

2. Sikkerhedsoplysninger

Please read and understand all safety warnings before using the blaster. Failure to follow these instructions may result in injury.

3. Pakkens indhold

Verify that all components are present in your Nerf N-Strike Elite Alpha Trooper CS-6 Mission Kit:

Nerf N-Strike Elite Alpha Trooper CS-6 Blaster with included stock, two magazines, and twelve Elite darts laid out.
Image 3.1: All components of the Nerf N-Strike Elite Alpha Trooper CS-6 Mission Kit.
Nerf N-Strike Elite Alpha Trooper CS-6 Mission Kit in its retail packaging, showing the blaster, magazines, and darts.
Image 3.2: The Nerf N-Strike Elite Alpha Trooper CS-6 Mission Kit as packaged.

4. Opsætning

4.1 Attaching the Stock

Align the detachable stock with the stock attachment point at the rear of the blaster. Push firmly until it clicks securely into place.

Side view of the Nerf N-Strike Elite Alpha Trooper CS-6 blaster with the stock attached, resting on a concrete surface.
Image 4.1: The Alpha Trooper CS-6 blaster with the stock attached.
Vinklet view of the Nerf N-Strike Elite Alpha Trooper CS-6 blaster with the stock attached, showing the pump handle and magazine well.
Billede 4.2: Endnu en view of the Alpha Trooper CS-6 blaster with the stock.

4.2 Indlæsning af magasinet

Insert Elite darts into the magazine one by one, ensuring they are fully seated. Each 6-dart magazine holds up to six darts.

4.3 Inserting the Magazine

With the blaster unprimed, insert the loaded magazine into the magazine well located on the underside of the blaster until it clicks into place.

5. Betjening af blæseren

5.1 Priming og fyring

  1. Ensure a loaded magazine is inserted.
  2. Grasp the pump handle located under the barrel.
  3. Pull the pump handle all the way back until it locks into place, then push it all the way forward. This action primes the blaster and loads a dart into the firing chamber.
  4. Aim the blaster at a safe target.
  5. Pull the trigger to fire the dart.

5.2 Slam-Fire Feature

The Alpha Trooper CS-6 features slam-fire for rapid dart blasting. To use slam-fire:

  1. Hold aftrækkeren nede.
  2. Rapidly pump the handle back and forth. Darts will fire continuously as long as the trigger is held and the blaster is pumped.

6. Vedligeholdelse

6.1 Pleje af dartpile

To ensure optimal performance, keep darts clean and free from damage. Do not use bent, torn, or otherwise compromised darts, as this can lead to jams.

6.2 Rengøring

Wipe the blaster clean with a damp klud. Sænk ikke blæsepistolen ned i vand, og brug ikke skrappe kemikalier.

7. Fejlfinding

ProblemMulig årsagLøsning
Blaster not firing or dart not launching far.
  • Blasteren er ikke fuldt primet.
  • Damaged or worn darts.
  • Magasinet er ikke helt isat.
  • Dart-jam.
  • Internal mechanism issue (e.g., spring, O-ring).
  • Ensure pump handle is pulled all the way back and pushed all the way forward.
  • Use only new, undamaged Elite darts.
  • Tryk magasinet godt ned, indtil det klikker.
  • Refer to "Clearing Jams" section below.
  • Kontakt kundesupport, hvis problemerne fortsætter.
Darts jamming frequently.
  • Damaged or incorrect darts.
  • Magazine not properly loaded or inserted.
  • Pump handle not operated smoothly.
  • Use only genuine, undamaged Elite darts.
  • Ensure darts are fully seated in the magazine and the magazine is clicked into place.
  • Operate the pump handle with a full, smooth motion.

7.1 Udredning af papirstop

Hvis en pil sætter sig fast:

  1. Remove the magazine from the blaster.
  2. Pull the pump handle back to its rearmost position.
  3. Carefully inspect the dart chamber and barrel for any lodged darts.
  4. Gently remove any jammed darts. Do not force them.
  5. Reinsert the magazine and attempt to prime and fire again.

8. Specifikationer

9. Garanti og support

For warranty information and customer support, please refer to the official Hasbro webwebstedet eller kontakt deres kundeserviceafdeling direkte. Gem din købsbevis til eventuelle garantikrav.

Producentkontakt: Please visit the Hasbro official webhjemmeside for de seneste kontaktoplysninger.

Relaterede dokumenter - cs-6

Preview Guide til udskiftning af Nerf N-Strike Elite Alpha Trooper CS-12-løb
Detaljeret vejledning til udskiftning af løbet på Nerf N-Strike Elite Alpha Trooper CS-12 legetøjspistolen. Indeholder nødvendige værktøjer og trinvise instruktioner til adskillelse og samling.
Preview Nerf N-Strike Elite Strongarm Blaster: Brugervejledning
Officiel vejledning til Nerf N-Strike Elite Strongarm legetøjsblasteren. Lær, hvordan du lader pile, affyrer enkeltskud og bruger slam-fire-funktionen til hurtig affyring. Indeholder sikkerhedsadvarsler og produktoplysninger.
Preview Nerf Alpha Trooper CS-18 Plunger Udskiftningsvejledning
En trin-for-trin guide fra iFixit til, hvordan man udskifter stemplet i en Nerf Alpha Trooper CS-18 dartblaster. Inkluderer nødvendige værktøjer og detaljerede instruktioner til adskillelse.
Preview NERF N-Strike Elite AccuStrike FalconFire Blaster: Instruktioner og funktioner
Officielle instruktioner og deroverview til NERF N-Strike Elite AccuStrike Series FalconFire dartblasteren, inklusive hvordan legetøjet lades, affyres og opbevares. Indeholder produktdetaljer og sikkerhedsoplysninger.
Preview NERF MEGALODON instruktionsmanual - Vejledning til belastning, brand og sikkerhed
Officiel instruktionsmanual til NERF N-STRIKE MEGA MEGALODON blasteren. Lær, hvordan du lader, affyrer, fjerner blokeringer, opbevarer og bruger slam fire-tilstanden sikkert. Indeholder aldersanbefalinger og advarsler.
Preview Nerf Hyper MACH-100 Blaster: Brugsanvisning og sikkerhedsinstruktioner
Omfattende guide til Nerf Hyper MACH-100 blasteren, der beskriver, hvordan man lader, affyrer, fjerner blokeringer, opbevarer blasteren og vigtige sikkerhedsforanstaltninger. Indeholder batteriinformation og produktkompatibilitet.