RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock User Manual

1. Introduktion

Tak for købetasing the RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock. This device is a radio-controlled alarm clock equipped with a thermometer, hygrometer, and calendar display. Its compact design and user-friendly interface make it ideal for various indoor settings. This manual provides detailed instructions to help you set up, operate, and maintain your new alarm clock.

Nøglefunktioner:

• Atomic Clock Movement: Automatically synchronizes time via radio waves for precise accuracy.
• Temperaturvisning: Shows ambient temperature from -9.9 to 50 ℃.
• Fugtighedsdisplay: Shows ambient humidity from 20% to 95%.
• Electronic Sound Alarm: Features an alarm with an auto-stop function.
• Snooze-funktion: Slukker midlertidigt for alarmen.
• Dial Light: Includes an afterglow function for visibility in low light (5 seconds).
• Kalendervisning: Shows date and day of the week, including Rokuyoku (Japanese traditional calendar).
• 12/24 Hour Display: Switchable time format.

2. Pakkens indhold

Kontroller venligst, at alle varer er til stede i pakken:

• RHYTHM 8RZ166SR03 Fit Wave Smart Alarm Clock
• Instruktionsmanual (dette dokument)

Note: 2 x AA manganese batteries are required and sold separately.

3. Produktet er slutview

Front View and Display Elements:

This image displays the front of the RHYTHM 8RZ166SR03 alarm clock. It features a large digital LCD screen at the top, showing time, date, temperature, and humidity. Below the screen are five circular control buttons labeled (from left to right): Monitor, Time Adjustment, Reset, Back, and Forward.

This diagram illustrates the various elements of the LCD display:

• Tidsvisning: Shows the current time in 12-hour (AM/PM) or 24-hour format.
• Radio Wave Reception Indicator: Displays the status of radio wave reception.
• Alarmindikator: An icon appears when the alarm is activated.
• Temperaturvisning: Viser den aktuelle rumtemperatur.
• Fugtighedsdisplay: Shows the current room humidity.
• Kalendervisning: Shows the current date and day of the week, including Rokuyoku.

Tilbage View og kontroller:

The back of the clock features the alarm ON/OFF slide switch on the left side and the battery compartment cover in the center. The model number '8RZ166' and 'MADE IN CHINA' are also visible.

Control Buttons Explained:

This image details the function of each button:

• Skærmknap: Used to check the alarm sound.
• Time Adjustment Button: Used for manual time setting and switching between 12/24 hour display.
• Nulstil knap: Resets the clock and also functions as a forced radio wave reception button.
• Back Button (←): Used to decrease values during alarm or time settings.
• Forward Button (→): Used to increase values during alarm or time settings.
• Alarm Switch (on back): Slides up for ON, down for OFF.
• Snooze Button (top): Activates the snooze function and the dial light.

4. Opsætning

4.1 Batteriinstallation

1. Fjern batteridækslet på bagsiden af ​​uret.
2. Insert two (2) AA manganese batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.


This image shows the open battery compartment with two AA batteries correctly inserted, indicating the positive and negative terminals.

3. Sæt batterirummets dæksel på igen.

4.2 Initial Power On and Radio Wave Reception

After battery installation, the clock will automatically attempt to receive radio waves to set the correct time. This process may take several minutes. Ensure the clock is placed in an area with good reception, away from electronic devices that may cause interference.

This diagram illustrates how radio-controlled clocks receive standard time signals from two transmission stations (one in Fukushima, 40kHz, and one in Fukuoka/Saga, 60kHz) to automatically correct and display the precise time. The clock will automatically adjust its time based on these signals.

If reception is successful, the time will be set automatically. If not, you may need to manually set the time (refer to Section 5.1).

5. Betjeningsvejledning

5.1 Manuel indstilling af tid og dato

In cases where radio wave reception is difficult or for specific time zone adjustments:

1. Tryk og hold på Tidsjustering knappen, indtil tidsvisningen begynder at blinke.
2. Brug Tilbage (←) og Forward (→) knapper for at justere timerne.
3. Tryk på Tidsjustering button again to move to minutes, then adjust using Tilbage (←) og Forward (→).
4. Fortsæt med at trykke Tidsjustering for at gennemgå indstillingerne for år, måned og dag, og justere hver med Tilbage (←) og Forward (→).
5. Når alle indstillinger er korrekte, skal du trykke på Tidsjustering knappen en sidste gang for at bekræfte og afslutte indstillingstilstanden.

5.2 Alarmindstillinger

1. For at indstille alarmtidspunktet skal du trykke på og holde Tidsjustering button until the alarm time starts flashing (this may require cycling past the current time settings if already in manual time setting mode).
2. Brug Tilbage (←) og Forward (→) knapperne til at indstille den ønskede alarmtime og -minut.
3. Tryk på Tidsjustering knappen for at bekræfte alarmtidspunktet.

5.3 Aktivering/deaktivering af alarmen

Brug Alarm ON/OFF slide switch located on the back of the clock:

• Skub kontakten UP to activate the alarm. An alarm icon will appear on the display.
• Skub kontakten NED to deactivate the alarm. The alarm icon will disappear.

5.4 Snooze Function and Dial Light

Når alarmen lyder, skal du trykke på den store Snooze knap located on the top of the clock. This will:

• Temporarily silence the alarm (snooze duration is preset).
• Activate the dial light for approximately 5 seconds, illuminating the display for easy viewi mørket.

Alarmen lyder igen efter snooze-perioden. For at stoppe alarmen helt skal du skubbe Alarm ON/OFF kontakt til FRA.

5.5 Display Modes (12/24 Hour Format)

To switch between 12-hour (with AM/PM indicator) and 24-hour time formats, briefly press the Tidsjustering button outside of setting mode.

5.6 Checking Alarm Sound

Til præview the alarm sound, press the Overvåge button on the front of the clock.

6. Vedligeholdelse

6.1 Rengøring

To clean the clock, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing eller display.

6.2 Udskiftning af batteri

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. It is recommended to replace both batteries at the same time with new ones.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

RHYTHM products are manufactured with high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact the RHYTHM customer support or your local distributor. Keep your purchase receipt as proof of purchase.