Wisi VX 81 0S Hjemmeforbindelse Amplivligere brugervejledning

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Wisi VX 81 0S Home Connection Amplifier. Please read these instructions carefully before using the device to ensure optimal performance and safety. The Wisi VX 81 0S is a 1 GHz home connection amplifier designed for signal distribution within a residential environment, featuring a compact Mini Line housing and a variable damping regulator.

2. Sikkerhedsinstruktioner

• Ensure the device is connected to a power supply that matches the specified voltage (230 VAC 50/60 Hz).
• Udsæt ikke amplifier to moisture, rain, or extreme temperatures.
• Undgå at blokere ventilationsåbningerne for at forhindre overophedning.
• Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret personale.
• Hold enheden væk fra stærke elektromagnetiske felter.
• Dette produkt er kun beregnet til indendørs brug.

3. Produktet er slutview

This image displays the Wisi VX 81 0S Home Connection Amplifier. It features a compact silver housing with 'Input DS' and 'Output DS' ports at the bottom. The label on the device shows 'WISI MINI LINE VX 81 0S Verstärker Amplifier', along with electrical specifications (230 VAC 50/60 Hz ≤ 4.5W), downstream frequency range (85-1006 MHz / 21 dB), CENELEC specifications (42 ch. flat 98 dBµV), and upstream frequency range (5-65 MHz / 16 dB). Manufacturer details, model number (74123), and a barcode (4010056741235) are also visible. A black power cable extends from the right side.

Nøglefunktioner:

• Compact Mini Line housing for discreet installation.
• Equipped with all necessary RF connectors for seamless integration.
• Adjustment elements with rotary support for precise signal level control.

4. Opsætning

4.1 Montering

The Wisi VX 81 0S amplifier is designed for wall mounting. Use appropriate screws and anchors suitable for your wall material to securely fasten the device. Ensure sufficient space around the amplifier for ventilation and cable connections.

4.2 Kabelforbindelser

1. Connect the incoming signal cable from your antenna or cable provider to the 'Input DS' port på amplivligere.
2. Connect the outgoing signal cable(s) to your distribution network or individual devices from the 'Output DS' havn.
3. Ensure all F-connectors are securely tightened to prevent signal loss.

4.3 Strømtilslutning

Plug the integrated power cable into a standard 230 VAC 50/60 Hz electrical outlet. The amplifier will power on automatically.

5. Betjeningsvejledning

The Wisi VX 81 0S features a variable damping regulator, which is a rotary selector, allowing you to adjust the signal amplification level. This adjustment helps optimize signal quality and prevent over-amplification or under-amplifikation.

5.1 Adjusting Signal Level

1. Locate the rotary selector on the amplivligere.
2. Slowly turn the selector clockwise to increase amplification or counter-clockwise to decrease it.
3. Monitor the signal quality on your connected television or other receiving devices while making adjustments. Aim for a clear, stable picture and sound without distortion.
4. Optimal adjustment ensures that the signal is strong enough to overcome cable losses but not so strong that it overloads the receiving equipment.

6. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre ydersiden af ampBrug ikke flydende rengøringsmidler eller slibende materialer.
• Ventilation: Periodically check that the ventilation slots are free from dust and debris to ensure proper heat dissipation.
• Kabelforbindelser: Occasionally inspect all cable connections for tightness and signs of corrosion. Re-tighten if necessary.
• Miljøforhold: Sørg for amplifier remains in a dry, indoor environment within its specified operating temperature range.

7. Fejlfinding

7.1 No Signal or Weak Signal

• Tjek strøm: Sørg for amplifier is properly plugged in and receiving power.
• Kabelforbindelser: Verify that all input and output cables are securely connected to the amplifier and receiving devices.
• Signalkilde: Confirm that the incoming signal from your antenna or cable provider is active and strong enough.
• Tilpasse Ampliifikation: Use the rotary selector to adjust the amplification level. Too low or too high amplification can cause signal issues.
• Bypass Test: Temporarily bypass the amplifier by connecting the input cable directly to a receiving device to determine if the issue lies with the amplifier eller signalkilden.

7.2 Distorted Picture or Sound

• Over-ampliifikation: Reducer amplification level using the rotary selector. An excessively strong signal can cause distortion.
• Kabelkvalitet: Ensure you are using high-quality coaxial cables. Damaged or low-quality cables can introduce noise.
• Interferens: Check for nearby electronic devices that might be causing interference.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Wisi customer service directly. Keep your proof of purchase for warranty claims.

Producentkontakt:
WISI Communications GmbH & Co. KG
75223 Niefern-Oeschelbronn, GERMANY