Produkt overview
The Brita Metro Water Filter Pitcher is designed to provide healthier, great-tasting tap water. This BPA-free pitcher has a 6-cup capacity, suitable for daily use. It features advanced filter technology that reduces the taste and odor of chlorine, and is certified to reduce impurities such as copper, cadmium, and mercury. The pitcher includes an ergonomically designed flip-top lid for easy refilling and an electronic filter indicator to signal when a filter replacement is needed. Each standard filter is designed to last approximately 2 months or filter 40 gallons of water.
Image: The Brita Metro Water Filter Pitcher in red, shown with a white Brita filter cartridge. The pitcher is clear, allowing visibility of the water level and filter housing.
Image: A diagram illustrating key features of the Brita Metro Water Filter Pitcher, including the electronic indicator, easy-to-fill and clean design, BPA-free material, 6-cup capacity, and its ability to fit in a refrigerator.
Opsætning og første brug
- Udpakning og vask: Remove all components from the packaging. Wash the pitcher, lid, and reservoir by hand with mild detergent and rinse thoroughly. Do not wash the filter in a dishwasher.
- Klargør filteret: Wash your hands before handling the filter. Flush the new Brita Standard filter under cold running tap water for 15 seconds. This helps remove any loose carbon dust.
- Indsæt filteret: Align the groove on the filter with the notch in the pitcher's reservoir. Firmly insert the filter into the reservoir until it clicks into place.
- Fyld kanden: Fill the reservoir with cold tap water. The water will begin to filter through immediately.
- Kassér de første portioner: The first three pitchers of filtered water may contain carbon dust, which is harmless. For best results, discard this water or use it to water plants.
- Set Filter Indicator: If your pitcher has an electronic filter indicator, press and hold the "STATUS" button on the lid for a few seconds until the green light flashes, indicating the filter life has been reset.
Image: The back of the Brita Metro Water Filter Pitcher packaging, displaying a visual guide for easy setup, including steps for flushing and inserting the filter, and filling the pitcher.
Betjeningsvejledning
Fyldning af kanden
- To refill, simply open the flip-top lid and pour cold tap water into the reservoir. The lid is designed for easy access without needing to remove the entire top.
- Allow the water to filter through the cartridge into the main pitcher body. This process may take a few minutes depending on the water flow.
Pouring Filtered Water
- Once the water has filtered, you can pour it directly from the pitcher's spout. The design ensures that only filtered water is dispensed.
Electronic Filter Indicator
- The electronic indicator on the lid tracks filter life. It will typically show a green light when the filter is good, a yellow light when it's nearing replacement, and a red light when it's time to change the filter.
- Refer to the "Maintenance" section for filter replacement guidelines.
Billede: En top-down view of the Brita Metro Water Filter Pitcher's red lid, showing the electronic filter indicator button and the "Lift to Open" label for the flip-top lid, facilitating easy refilling.
Opretholdelse
Udskiftning af filter
For optimal performance and water quality, replace your Brita Standard filter every 40 gallons or approximately every 2 months, whichever comes first. The electronic filter indicator will signal when it's time for a replacement.
- Remove the old filter by pulling it straight up from the reservoir.
- Prepare the new filter as described in the "Setup and First Use" section (flush under cold water for 15 seconds).
- Insert the new filter firmly into the reservoir until it clicks into place.
- Reset the electronic filter indicator by pressing and holding the "STATUS" button until the green light flashes.
Image: A cross-section diagram showing the internal workings of a Brita filter, detailing the patented aeration design, mesh screen to prevent black flecks, and the activated carbon and ion exchange resin that reduce contaminants and improve taste and odor.
Rengøring af kanden
- The pitcher, lid, and reservoir should be hand-washed regularly with mild soap and water.
- Do not place the filter in a dishwasher.
- Ensure all parts are thoroughly rinsed before reassembly.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Slow filtration | Filteret kan være tilstoppet eller nærme sig slutningen af sin levetid. | Remove filter and re-insert firmly. If problem persists, replace the filter. |
| Black flecks in water | Kulstøv fra nyt filter. | This is harmless. Discard the first few pitchers of filtered water or use for plants. Ensure filter was flushed for 15 seconds before first use. |
| Water tastes "off" or like tap water | Filter needs replacement or is not properly seated. | Ensure filter is firmly inserted. Replace filter if it has reached its 2-month or 40-gallon capacity. |
| Electronic indicator not working | Battery issue or needs reset. | Press and hold the "STATUS" button to reset. If it still doesn't work, the battery may be depleted (some models have non-replaceable batteries, consult Brita support). |
Specifikationer
- Mærke: Brita
- Modelnavn: Metro
- Modelnummer: 0B11/OB03
- Kapacitet: 6 kopper
- Produktdimensioner: 9.8 cm L x 9.37 cm B x 4.45 cm H
- Varens vægt: 0.01 Ounces (Note: This weight seems unusually low and may refer to the filter or a component, not the full pitcher. Actual weight with water will be significantly higher.)
- Speciel funktion: Skift filterindikator
- Installationstype: Bordplade
- Strømkilde: Manual Operation (for pitcher), Battery (for indicator, if applicable)
- Filtertype: Brita Standardfilter
- Filterlevetid: Cirka 40 gallon eller 2 måneder
- Materiale: BPA-fri plast
- UPC: 060258360943
Garanti og support
For specific warranty information regarding your Brita Metro Water Filter Pitcher, please refer to the documentation included with your purchase or visit the official Brita website. Brita products typically come with a limited warranty covering defects in materials and workmanship.
For customer support, filter reminders, or to register your product, please visit the official Brita website or contact their customer service line. Contact information can usually be found on the product packaging or Brita's official webwebsted.
Online ressourcer: www.brita.com
