1. Introduktion
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Figur 1: Forside view of the Legrand LEG97605 Dimmer Switch.
2. Vigtige sikkerhedsoplysninger
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- Installationen skal udføres af en kvalificeret elektriker eller i overensstemmelse med lokale el-forskrifter.
- Overskrid ikke det maksimale wattage-effekt på 300W.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Denne enhed er kun designet til indendørs brug.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Instruktionsmanual (dette dokument)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Installationsvejledning
Follow these steps carefully to install your dimmer switch:
- Sluk for strømmen: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage tester, før du fortsætter.
- Forbered monteringssted: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Ledningsføring:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Montering: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Gendan strøm: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
Figur 3: Øverst view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Figur 4: Vinklet view highlighting the rotary control knob.
6. Vedligeholdelse
Your Legrand dimmer switch requires minimal maintenance.
- Rensning: To clean the surface of the dimmer, wipe with a soft, damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen.
- Inspektion: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Fejlfinding
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power to the switch; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Lyset flimrer eller summer. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte Legrands kundesupport eller en kvalificeret elektriker.
8. Tekniske specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Legrand |
| Modelnummer | LEG97605 |
| Driftstilstand | TÆND SLUK |
| Nuværende vurdering | 10 Amps |
| Wattage | 300 watt |
| Kontakttype | Normalt åben |
| Connector Type | Skruer |
| Terminal | Skrue |
| Kredsløbstype | 1-vejs |
| Aktuator type | Rotary |
| Controller type | Tryk knap |
| Kontaktmateriale | Kobber |
| International Protection Rating | IP54 |
| Monteringstype | Overflademontering |
| Farve | Hvid |
| Varens vægt | 2.46 ounce |
| Dato først tilgængelig | 25. september 2015 |
9. Garanti og kundesupport
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.
Legrand-embedsmand Webwebsted: www.legrand.us
