Indledning
The Mr. Beams MB720 LED Motion Sensor Light is a versatile, battery-operated light designed for various indoor and outdoor applications. It provides 20 lumens of brightness and features a motion sensor for automatic illumination. Its waterproof design allows for flexible placement, making it an ideal solution for illuminating pathways, steps, or small areas where light is needed only when motion is detected.
Sikkerhedsoplysninger
Læs venligst alle sikkerhedsinstruktioner, inden produktet tages i brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Bland ikke gamle og nye batterier.
- Bland ikke alkaliske, standard (kul-zink) eller genopladelige (nikkel-cadmium) batterier.
- Bortskaf brugte batterier korrekt i henhold til lokale regler.
- Opbevar enheden utilgængeligt for børn.
- Do not stare directly into the LED light when it is illuminated.
- Do not attempt to disassemble or modify the light.
Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1 x Mr. Beams MB720 LED Motion Sensor Light Unit
- (Note: 4 x AA batteries are required and sold separately.)
Opsætning og installation
Installation af batteri
The MB720 light requires 4 x AA batteries (sold separately) for operation.
- Locate the battery compartment on the back or bottom of the light unit.
- Åbn batterirummets dæksel.
- Isæt 4 AA-batterier, og sørg for at polerne (+ og -) vender korrekt som angivet inde i batterirummet.
- Close the battery compartment cover securely to ensure the waterproof seal is maintained.
Placering
This light is designed to stand on its own on a flat surface or can be mounted. Its IPX4 waterproof rating makes it suitable for both indoor and outdoor environments.
- For optimal motion sensing, place the light where the sensor has a clear line of sight to the desired detection area.
- The maximum sensing distance is approximately 14.8 feet (4.5 meters).
- Consider placing the light in areas such as bathrooms, hallways, stairwells, verandas, or wood decks where temporary illumination is beneficial.
Figur 1: Forside view of the Mr. Beams MB720 LED Motion Sensor Light, showing the motion sensor at the top.
Figure 2: Dimensions of the MB720 light, approximately 3.9 x 3.3 x 1.2 inches (10 x 8.5 x 3 cm).
Figure 3: Key features of the MB720 light, including motion sensor, 20 lumens brightness, 1m² irradiation area, 30-second auto-off, and battery compartment.
Operation
Automatisk aktivering
The Mr. Beams MB720 light is designed for fully automatic operation, utilizing both a light sensor and a motion sensor.
- The light will only activate in dark conditions. The built-in light sensor prevents activation during daylight hours to conserve battery life.
- When motion is detected within the sensing range (up to 14.8 ft / 4.5 m) in a sufficiently dark environment, the light will automatically turn on.
- The light will remain illuminated as long as motion is detected. Approximately 30 seconds after motion ceases, the light will automatically turn off.
Lysstyrke
The light provides 20 lumens of brightness, which is suitable for accent lighting, illuminating steps, or providing a low level of ambient light in dark areas.
Figure 4: Recommended usage scenarios for the MB720 light, including under sinks, near toilets, and on stairs for foot lighting.
Opretholdelse
Udskiftning af batteri
When the light begins to dim, flickers, or fails to activate, it is likely time to replace the batteries. Refer to the 'Battery Installation' steps in the Setup section.
- The estimated battery life is 12 months, but actual life may vary significantly based on the frequency of activation and environmental conditions.
Rensning
To clean the exterior of the light, gently wipe it with a soft, damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen eller de indvendige komponenter.
Fejlfinding
If you encounter issues with your Mr. Beams MB720 light, please refer to the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Utilstrækkelig mørke. | Ensure the light is in a sufficiently dark environment for the light sensor to activate. |
| Lyset tændes ikke. | Døde eller forkert installerede batterier. | Replace batteries with new AA batteries, ensuring correct polarity (+/-). |
| Lyset tændes ikke. | Motion sensor obstructed or out of range. | Fjern eventuelle forhindringer fra sensorens view. Ensure motion occurs within 14.8 ft (4.5 m) of the sensor. |
| Lyset er tændt konstant. | Kontinuerlig bevægelse registreret. | Ensure there is no continuous motion in the sensor's field of view. |
| Lyset er tændt konstant. | Sensorfejl. | Remove batteries for 60 seconds, then reinsert to reset the unit. If the problem persists, contact customer support. |
Specifikationer
Detailed technical specifications for the Mr. Beams MB720 LED Motion Sensor Light:
| Feature | Detalje |
|---|---|
| Modelnummer | MB720 |
| Mærke | Hr. Bjælker |
| Dimensioner (L x B x H) | Ca. 3.9 x 3.3 x 1.2 tommer (10 x 8.5 x 3 cm) |
| Vægt | Approx. 0.4 lbs (0.135 kg) / 4.8 ounces |
| Materiale | ABS Resin / Acrylonitrile Butadiene Styrene |
| Lysstrøm | 20 lumen |
| Irradiation Area | 1 m² |
| Bevægelsessensor | Ja |
| Max Sensing Distance | 14.8 fod (4.5 m) |
| Auto-sluk tid | 30 seconds after motion ceases |
| Batterier påkrævet | 4 x AA batteries (sold separately) |
| Anslået batterilevetid | 12 months (varies with usage frequency) |
| LED liv | Ca. 30,000 timer |
| Vandtæt vurdering | IPX4 |
| Lyssensor | Built-in (activates only after dark) |
| Indendørs/Udendørs brug | Udendørs |
| Strømkilde | Batteridrevet |
Garanti og support
For warranty information, technical support, or to inquire about replacement parts, please contact Mr. Beams customer service. Refer to the product packaging or the official Mr. Beams webhjemmeside for de seneste kontaktoplysninger.
Først tilgængelig fra: 21. september 2015
