1. Introduktion
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Omron E-Stop Push Button, Model 11004-7002. This device is designed as an emergency stop control for industrial machinery and systems, ensuring immediate cessation of operations when activated.
The Omron E-Stop Push Button features a 22mm mounting diameter, a 40mm red mushroom head, and a 2NC (Normally Closed) contact configuration. It operates with a maintained push action for activation and a turn-to-release mechanism for resetting.
Image 1: Omron E-Stop Push Button. This image displays the Omron E-Stop Push Button. It features a prominent red 40mm mushroom-shaped head with white arrow indicators for the 'turn to release' function. The main body is black, housing the contact blocks at the bottom. The overall design emphasizes quick identification and activation in emergency situations.
2. Sikkerhedsoplysninger
ADVARSEL: Manglende overholdelse af disse sikkerhedsinstruktioner kan resultere i alvorlig personskade eller død.
- Installation og vedligeholdelse må kun udføres af kvalificeret personale.
- Always disconnect and lock out/tag out all power sources before installing, wiring, or servicing the E-Stop button.
- Ensure the E-Stop button is integrated into a safety circuit that complies with all relevant local and international safety standards (e.g., UL, CE).
- Regularly test the E-Stop button for proper functionality.
- Do not bypass or modify the E-Stop button or its associated safety circuitry.
3. Opsætning og installation
Follow these steps for proper installation of the E-Stop Push Button:
- Paneludskæring: Create a 22mm diameter hole in the control panel for mounting. Ensure sufficient clearance behind the panel for the contact blocks and wiring.
- Montering: Insert the E-Stop button assembly through the panel cutout from the front. Secure it in place using the provided locking nut on the rear of the panel. Tighten the nut firmly to prevent rotation.
- Ledningsføring: Connect the control circuit wires to the screw clamp terminals of the 2NC contact blocks. Ensure correct polarity and secure connections. The 2NC contacts will open when the button is pressed. Refer to your system's wiring diagram for specific connections.
- Verifikation: After wiring, visually inspect all connections for tightness and correct routing.
- Funktionstest: Before restoring power to the system, perform a continuity test on the 2NC contacts to confirm they are closed in the released state and open when the button is pressed.
4. Betjeningsvejledning
- Aktivering: In an emergency, firmly push the red mushroom head of the E-Stop button. The button will latch in the depressed position, and the 2NC contacts will open, immediately stopping the connected machinery or process.
- Nulstilling: To reset the E-Stop button, turn the red mushroom head clockwise (as indicated by the arrows on the button) until it springs back to its original, unlatched position. This action closes the 2NC contacts, allowing the system to be restarted once the emergency condition is resolved and it is safe to do so.
- Visuel indikation: The button's physical state (depressed or released) provides a clear visual indication of its activation status.
5. Vedligeholdelse
Regular maintenance ensures the reliable operation of the E-Stop button:
- Periodisk eftersyn: Visually inspect the E-Stop button and its mounting for any signs of damage, wear, or loose connections. Ensure the button head is free from obstructions.
- Funktionstest: Perform routine functional tests by activating and resetting the E-Stop button to confirm it operates smoothly and latches/unlatches correctly. Verify that the connected machinery responds as expected.
- Rensning: Clean the button head and surrounding area with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic materials.
- Kontaktintegritet: Periodically check the screw clamp terminals for tightness to ensure good electrical contact.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| E-Stop does not activate (machine does not stop). | Loose wiring, damaged contact block, incorrect wiring, button mechanism jammed. | Check all wiring connections. Inspect contact block for damage. Verify wiring against schematic. Ensure button head moves freely. |
| E-Stop does not reset (button remains latched). | Button mechanism jammed, internal damage. | Ensure the button is turned fully clockwise. Inspect for physical obstructions. If persistent, replace the unit. |
| Intermitterende operation. | Loose connections, worn contacts, environmental factors (dust, moisture). | Tighten all wiring. Inspect contacts for wear. Clean the unit and ensure proper environmental protection. |
If troubleshooting steps do not resolve the issue, contact Omron technical support or a qualified electrician.
7. Specifikationer
| Punkt | Nødstop-trykknap |
| Modelnummer | 11004-7002 |
| Størrelse | 22 mm |
| Farve | Rød |
| Type of Operator | 40mm Mushroom Head |
| Handling | Maintained Push / Turn To Release |
| Kontaktformular | 2NC (Normalt lukket) |
| Kontaktvurdering | 10A ved 440VAC |
| Hovedmateriale | Plast |
| Bezel-materiale | Plast |
| Terminalforbindelse | Skrue Clamp |
| Legende | No Legend |
| Materiale | Plast |
| IP-vurdering | 65 |
| Standarder | UL, CE |
| Produktmål (L x B x H) | 6 x 3.4 x 1.8 tommer |
| Vægt | 1 pund |
| Fabrikant | OMRON STI |
8. Garanti og support
This Omron product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Omron webwebsted.
For technical support, product inquiries, or to explore other Omron products, please visit the Omron-butik på Amazon or contact Omron customer service directly.
