Indledning
This manual provides detailed instructions for the proper use and care of your Korg PB-04 Pitchblack Portable Polyphonic Tuner. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
Produkt overview
Figure 1: Korg PB-04 Pitchblack Portable Polyphonic Tuner Front Panel
This image displays the Korg PB-04 Pitchblack tuner. On the front panel, from left to right, are the OUTPUT jack, the main display with tuning indicators for individual strings (1-6) and a FINE tuning meter, the INPUT jack, and the CABLE CHECK indicator. Below the display are the power button, CALIB, FLAT/CAPO, DISPLAY, and MUTE buttons. The 'pitchblack PORTABLE POLYPHONIC TUNER' logo is visible on the right.
The Korg PB-04 Pitchblack is a compact and versatile polyphonic tuner designed for guitar and bass. It features a bright LED display, multiple tuning modes, and a cable check function.
Opsætning
- Strømtilslutning: Connect a standard 9V DC power adapter (not included) to the DC IN jack on the rear panel. Alternatively, insert two AAA batteries into the battery compartment.
- Instrumenttilslutning: Tilslut dit instrument til INPUT stik ved hjælp af et standard 6,5 mm instrumentkabel.
- Output Connection (Optional): If you wish to pass the signal through to an amplifier or other effects pedal, connect a cable from the PRODUKTION jack to your next device.
- Tænd: Press and hold the power button (located next to the CALIB button) to turn the unit on.
Betjeningsvejledning
Basic Tuning (Polyphonic Mode)
- Ensure the tuner is powered on.
- Strum all open strings of your guitar or bass simultaneously. The display will show the tuning status for each string (1-6).
- Adjust each string individually until its corresponding indicator on the display turns green, indicating it is in tune. Red indicates flat, and yellow indicates sharp.
Kromatisk Tuning Mode
- To switch to chromatic mode, pluck a single string. The tuner will automatically detect the note and display it on the main screen, along with the BØDE tuning meter.
- Adjust the string until the note name is correct and the BØDE tuning meter indicates the pitch is centered.
Calibration (A4 Pitch Adjustment)
- Tryk på CALIB knappen for at gå ind i kalibreringstilstand.
- Brug FLAT/CAPO og VISE buttons to adjust the A4 reference pitch in 1 Hz increments (typically from 436 Hz to 445 Hz).
- Trykke CALIB again to exit calibration mode.
Flat/Capo Settings
- Tryk på FLAT/CAPO button to cycle through flat tuning settings (e.g., b, bb, bbb). This is useful for tuning down.
- Hold FLAT/CAPO button to activate capo mode, which transposes the display to show the actual pitch while accounting for a capo.
Visningstilstande
- Tryk på VISE button to cycle through different display modes, such as standard meter, strobe, or half-strobe.
Mute-funktion
- Tryk på STUM button to silence the output signal. The STUM indicator on the display will illuminate. This is useful for silent tuning during performances.
- Tryk på STUM button again to unmute the output.
Cable Check Function
- To check your instrument cable, connect one end to the INPUT jack and the other end to the PRODUKTION stik.
- De CABLE CHECK indicator will illuminate if the cable is functioning correctly. If it does not light up, the cable may be faulty.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Udskiftning af batteri: If using batteries, replace them when the display dims or the unit fails to power on. Ensure correct polarity when inserting new batteries.
- Opbevaring: When not in use for extended periods, remove batteries to prevent leakage. Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | No power adapter connected, dead batteries, incorrect battery polarity. | Connect power adapter, replace batteries, check battery orientation. |
| Tuner is inaccurate. | Incorrect calibration, noisy environment, faulty instrument. | Recalibrate A4 pitch, tune in a quiet environment, check instrument's intonation. |
| No sound from OUTPUT. | Mute function active, faulty cable, incorrect connection. | Deactivate MUTE, check cables, ensure correct signal path. |
| Cable Check fails. | Defekt kabel. | Replace the instrument cable. |
Specifikationer
- Stemmeskala: 12-toners lige temperament
- Registreringsområde: E0 (20.60 Hz) – C8 (4186 Hz)
- Kalibreringsområde: A4 = 436 – 445 Hz (i trin på 1 Hz)
- Detektionsnøjagtighed: +/- 0.1 cent
- Indgangsimpedans: 1 MΩ
- Udgangsimpedans: 1 kΩ
- Forbindelser: INPUT (1/4" mono jack), OUTPUT (1/4" mono jack), DC IN (9V)
- Strømforsyning: Two AAA batteries (3V) or AC adapter (9V, not included)
- Batterilevetid: Approximately 3 hours (continuous use, alkaline batteries)
- Dimensioner (B x D x H): Cirka 100 x 60 x 25 mm (3.94 x 2.36 x 0.98 tommer)
- Vægt: Approximately 80 g (2.82 oz) (excluding batteries)
Specifikationerne kan ændres uden varsel med henblik på produktforbedring.
Garanti og support
Korg products are manufactured to high-quality standards. This product is covered by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, service, or further inquiries, please visit the official Korg webwebstedet eller kontakt din lokale Korg-distributør. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
