Brugermanual til SDC CB401-AU Kommunikationstrykknap til badekar

Produkt overview

The SDC CB401-AU is a communicating bath push switch designed for secure access control in shared bathroom environments. This stainless steel switch is compatible with Emlock, Selectric, Electra, and Hi-Tower locking systems. It ensures that both doors of a communicating bathroom must be closed for the lock to engage, enhancing privacy and security. A visual indicator light confirms the locked status.

SDC CB401-AU Communicating Bath Push Switch with red button and text 'BATHROOM LOCK BOTH DOORS MUST BE CLOSED TO LOCK PUSH TO LOCK OR UNLOCK LIGHT ON DOOR LOCKED'

Figure 1: SDC CB401-AU Communicating Bath Push Switch. This image displays the front of the stainless steel switch, featuring a prominent red square push button. Above the button, text reads "BATHROOM LOCK" and "BOTH DOORS MUST BE CLOSED TO LOCK". Below the button, it states "PUSH TO LOCK OR UNLOCK" and "LIGHT ON DOOR LOCKED". The SDC logo is visible at the top.

Opsætning og installation

This section provides general guidelines for the installation of the CB401-AU switch. Professional installation is recommended to ensure proper functionality and compliance with local electrical codes.

Tjekliste før installation:

Verify compatibility with your existing Emlock, Selectric, Electra, or Hi-Tower locking system.
Ensure all necessary wiring and power sources are available and meet specifications.
Confirm the mounting location inside the shared bathroom is suitable and accessible.
Gather required tools (e.g., screwdriver, wire strippers, drill).

Monteringsvejledning:

Sluk for strømmen til installationsområdet ved afbryderen.
Carefully remove the existing switch plate, if applicable.
Connect the wiring from the locking system to the appropriate terminals on the CB401-AU switch. Refer to the wiring diagram provided with your specific locking system for correct connections.
Mount the switch securely to the wall box using the provided screws.
Fastgør frontpladen.
Genopret strømmen og test funktionaliteten.

Vigtig: This switch requires both communicating bathroom doors to be closed for the lock to engage. Ensure the associated door sensors and wiring are correctly installed and functioning.

Betjeningsvejledning

The SDC CB401-AU switch provides simple operation for securing a shared bathroom.

Locking the Bathroom:

Ensure both communicating bathroom doors are fully closed.
Press the red push button on the CB401-AU switch.
The integrated light on the CB401-AU switch will illuminate, indicating that the doors are locked.
Verify that both doors are securely locked from the outside.

Unlocking the Bathroom:

Press the red push button on the CB401-AU switch again.
The integrated light will turn off, indicating that the doors are unlocked.
Verify that both doors can be opened.

Note: If the light does not illuminate when attempting to lock, ensure both doors are completely closed and the system is receiving power.

Opretholdelse

The SDC CB401-AU switch is designed for durability and requires minimal maintenance.

Rensning: Wipe the stainless steel surface with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen eller de indvendige komponenter.
Inspektion: Periodically check the switch for any signs of physical damage, loose connections, or unusual operation.
Funktionstest: Regularly test the locking and unlocking function to ensure proper operation.

Do not attempt to disassemble the switch. Refer all internal repairs to qualified service personnel.

Fejlfinding

Problem	Mulig årsag	Løsning
Switch does not lock doors.	Doors not fully closed. Ingen strøm til systemet. Ledningsproblem. Defekt låsemekanisme.	Ensure both doors are completely closed. Kontroller afbryderen og strømforsyningen. Verify all wiring connections are secure (consult professional). Inspect the associated Emlock/bolt lock for proper function.
Light does not illuminate when locked.	Light bulb failure (if applicable). Wiring issue to the indicator light. System not fully engaged.	Contact SDC support for replacement or service. Check wiring connections (consult professional). Ensure doors are fully closed and lock mechanism is engaged.
Switch feels loose or wobbly.	Monteringsskruerne er løse. Forkert installation.	Gently tighten mounting screws. Do not overtighten. If issue persists, professional re-installation may be required.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact SDC customer support.

Specifikationer

Feature	Detalje
Modelnummer	CB401-AU
Produktdimensioner	2 x 3 x 5 tommer
Varens vægt	4.8 ounce
Materiale	Rustfrit stål
Driftstilstand	ON-NONE-OFF
Monteringstype	Vægmontering
Aktuator type	Tryk knap
International Protection Rating	IP00
Kontrolmetode	App (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Forbindelsesprotokol	Wi-Fi (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Kompatible systemer	Emlock, Selectric, Electra, Hi-Tower

Bemærk: Specifikationerne kan ændres uden varsel.

Garanti og support

Garantioplysninger:

Specific warranty details for the SDC CB401-AU switch are typically provided with the product packaging or can be obtained directly from SDC. Generally, SDC products come with a limited warranty covering defects in materials and workmanship under normal use.

Gem venligst dit købsbevis for garantikrav.

Kundesupport:

For technical assistance, troubleshooting, or warranty inquiries, please contact SDC customer support. Contact information can usually be found on the SDC official webwebstedet eller i produktdokumentationen.

When contacting support, please have your product model number (CB401-AU) and purchase date available.

	SDC's konstruerede systemdesigntjenester til adgangs- og udgangskontrol SDC's Engineered System Design Services tilbyder omfattende løsninger til adgangs- og udgangskontrol med flere døre, inklusive UR-seriens controllere, EMLåse, elektriske slutblekker og detaljerede systemdiagrammer til forskellige anvendelser.
	Installationsvejledning til SDC CB-seriens kommunikerende badeværelsesafbryder Detaljerede installationsvejledninger til SDC CB-serien af kommunikerende badeværelsesafbrydere, inklusive modellerne CB400-A, CB400-B og CB700. Dækker specifikationer, ledningsføring og monteringsprocedurer for døradgangskontrol.
	SDC 352 smal linje EMLock installationsvejledning Omfattende installationsvejledning til SDC 352 Narrow Line elektromagnetisk lås. Lær, hvordan du korrekt installerer og tilslutter denne adgangskontrolhardware til 12VDC- eller 24VDC-systemer.
	Installationsvejledning til SDC 482A6RPH/484A6RPH HDPE ADA trykpladeafbryder Installationsvejledning til SDC 482A6RPH og 484A6RPH HDPE runde trykpladeafbrydere. Disse ADA-kompatible døråbnerknapper har en blå flade med hvid 'PUSH TO OPEN'-tekst og er designet til nem installation med forskellige el-dåser.
	SDC 432KLDUR Lockdown Push Switch Installation Instructions Detailed installation instructions for the SDC 432KLDUR Lockdown Push Switch, covering operation, specifications, wiring diagrams, and UL 294 performance ratings. Includes contact information for SDC Security Door Controls.
	Installationsvejledning til SDC 410/420-seriens trykknap Installationsvejledning til SDC 410/420-serien af trykknapper, med detaljerede elektriske specifikationer, ledningsdiagrammer og produktfunktioner til sikre adgangskontrolsystemer.

SDC CB401-AU