1. Produktet er slutview
The Omega 3-Tier Stationary Garment Rack is a heavy-duty storage solution designed for organizing clothes, shoes, and accessories. It features a robust metal construction with three adjustable wire shelves and a garment rod, offering significant storage capacity and ventilation. This unit is suitable for various organizational needs, including laundry rooms, closets, and general storage areas.
Image: Fully assembled Omega 3-Tier Stationary Garment Rack, black finish, showing three shelves and a hanging rod.
2. Sikkerhedsoplysninger
- Læs alle instruktioner omhyggeligt før montering og brug.
- Hold små dele væk fra børn under montering.
- Ensure all components are securely fastened before loading the rack.
- Do not exceed the maximum weight capacity for each shelf or the garment rod.
- Distribute weight evenly across shelves to maintain stability.
- Avoid climbing on the rack or allowing children to play on it.
- Place the rack on a flat, stable surface to prevent tipping.
3. Pakkens indhold
Før monteringen påbegyndes, skal du kontrollere, at alle dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.
| Del | Mængde | Beskrivelse |
|---|---|---|
| Trådhylder | 3 | Main storage surfaces. |
| Lodrette indlæg | 4 | Support columns for the shelves. |
| Plastklemmer | Ca.. 24 | Used to secure shelves to posts. |
| Garment Rod | 1 | For hanging clothes. |
| Garment Rod Brackets | 2 | Supports for the garment rod. |
| Nivellerende fødder | 4 | Adjustable feet for stability on uneven surfaces. |
| Screws/Washers (for rod) | 2 hver | Hardware for attaching garment rod brackets. |
Image: The black garment rod with two mounting brackets, screws, and washers.
4. Opsætning og montering
No tools are required for the main shelving unit assembly. A screwdriver may be needed for the garment rod attachment.
- Attach Leveling Feet: Screw the four leveling feet into the bottom of each vertical post. Adjust them later to ensure stability.
Billede: Et nærbillede view of an adjustable leveling foot, typically screwed into the bottom of the vertical posts.
- Install Plastic Clips: On each vertical post, locate the grooves. Snap two plastic clips together around each post at the desired height for the bottom shelf. Ensure the arrows on the clips point upwards. Repeat for all four posts at the same height.
Image: A close-up of a black vertical post, showing the circular grooves where plastic clips are attached.
- Placer nederste hylde: Carefully slide one wire shelf down over the four posts until it rests securely on the installed plastic clips. Apply even pressure to all corners.
- Install Middle and Top Shelves: Repeat step 2 and 3 for the middle and top shelves, positioning the plastic clips at your desired heights. Ensure all clips are at the same level on each post before placing a shelf.
Billede: Et nærbillede view of the wire shelf construction, highlighting the grid pattern and sturdy edges.
- Attach Garment Rod: Determine the desired position for the garment rod, typically between the top and middle shelves. Attach the two garment rod brackets to the underside of the top shelf using the provided screws and washers. Insert the garment rod into the brackets.
Image: A close-up showing the black garment rod securely attached to the underside of a wire shelf using its brackets.
- Endelige justeringer: Once assembled, gently push down on each shelf to ensure it is fully seated on the clips. Adjust the leveling feet as needed to eliminate any wobbling.
5. Betjening
The Omega Garment Rack is designed for straightforward use. Utilize the shelves for folded items, shoes, or storage boxes, and the garment rod for hanging clothing. The open wire design promotes air circulation, which is beneficial for stored items.
- Indlæser: Distribute items evenly across the shelves and along the garment rod to maintain balance and prevent strain on any single point.
- Kapacitet: Adhere to the maximum weight capacities: 600 lbs per shelf and 100 lbs for the garment rod.
- Justering af hylder: To adjust shelf height, remove all items from the shelf, lift the shelf off the clips, remove the clips, reposition them at the desired height, and then re-seat the shelf.
Image: The garment rack in use, displaying various hanging clothes on the rod and a handbag on a lower shelf, demonstrating its storage versatility.
6. Vedligeholdelse
- Rensning: Tør metaloverfladerne af med en blød,amp klud. Undgå slibende rengøringsmidler eller barske kemikalier, der kan beskadige overfladen.
- Inspektion: Periodically check all connections, especially the plastic clips and leveling feet, to ensure they remain secure.
- Rustforebyggelse: While the rack is designed for durability, avoid prolonged exposure to excessive moisture to prevent potential rust.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Rack is wobbly. | Uneven floor surface; loose leveling feet; shelves not fully seated. | Adjust the leveling feet until the rack is stable. Ensure all shelves are firmly pressed onto their plastic clips. |
| Shelves do not fit onto clips. | Clips not properly aligned or snapped together; clips installed upside down. | Ensure plastic clips are fully snapped around the posts and the arrows on the clips point upwards. Verify all clips for a single shelf are at the same height. |
| Garment rod is loose. | Brackets not securely screwed; rod not fully seated in brackets. | Tighten screws on the garment rod brackets. Ensure the rod is fully inserted into both brackets. |
| Manglende dele ved ankomst. | Emballagefejl. | Contact Omega Products Corporation customer support immediately for replacement parts. Refer to the "Warranty & Support" section. |
8. Specifikationer
- Mærke: Omega
- Modelnummer: GR3-182463-B
- Dimensioner (D x B x H): 18 cm x 24 cm x 63 cm
- Farve: Sort
- Antal niveauer: 3
- Materiale: Metal
- Hyldekapacitet: Up to 600 lbs per shelf (evenly distributed)
- Garment Rod Capacity: Op til 100 lbs
- Installationstype: Fritstående
- Speciel funktion: Justerbare hylder
- Varens vægt: Cirka 33 lbs
- Certificeringer: NSF certificeret
9. Garanti og support
For warranty information, replacement parts, or technical assistance, please contact Omega Products Corporation directly. Specific warranty terms may vary and are typically provided with the product packaging or available on the manufacturer's official webwebsted.
Fabrikant: Omega Products Corporation
Henvis til embedsmanden Omega-butik på Amazon for yderligere produktinformation og supportressourcer.
