Indledning
This manual provides detailed instructions for the safe and efficient operation of your Pyle PDA35BT Mini Bluetooth Power Digital Class D Amplifier. This compact 2-channel stereo amplifier features Bluetooth connectivity, two auxiliary inputs, and a headphone output, making it suitable for various audio setups. Please read this manual thoroughly before use and retain it for future reference.
Sikkerhedsinstruktioner
- Sørg for, at strømforsyningen voltage opfylder de krav, der er angivet på enheden.
- Udsæt ikke enheden for regn, fugt eller ekstreme temperaturer.
- Undgå at placere enheden i nærheden af varmekilder eller i direkte sollys.
- Åbn ikke ampliber casing. Overlad al service til kvalificeret personale.
- Hold enheden væk fra børn.
- Tag strømadapteren ud af stikkontakten, hvis enheden ikke skal bruges i længere tid.
- Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
Pakkens indhold
Kontroller, at alle genstande er til stede ved udpakning:
- Pyle PDA35BT Mini Bluetooth Power Amplivligere
- Wall Power Adapter (24V DC, 4.5A)
- Bluetooth antenne
- RCA (L/R) Audio Cable
- Banana Plugs (for speaker connection)
- 3.5mm (AUX) Input Cable
Figure 1: Pyle PDA35BT Amplifier and Accessories
This image displays the compact Pyle PDA35BT amplifier alongside its essential accessories, including the power adapter, detachable Bluetooth antenna, RCA audio cables, banana plugs for speaker wire termination, and a 3.5mm AUX input cable, illustrating a complete package for immediate setup.
Produkt overview
Frontpanel
Figure 2: Front and Rear Panel Diagram
This diagram provides a clear, numbered illustration of both the front and rear panels of the Pyle PDA35BT amplifier, highlighting all input, output, and control features for easy identification and setup.
- Strømindikator: Lyser, når enheden er tændt.
- BT-indikator: Illuminates when Bluetooth is active and flashes during pairing.
- Inputvælger: Toggle switch to select between Bluetooth (BT) and Line (AUX) input.
- Headphone Jack (1/4''): Connect headphones for private listening. Automatically mutes speaker output.
- Volume/ON/OFF Knob: Rotary control for adjusting master volume and powering the unit on/off.
- AUX-INDGANG (3.5 mm): Tilslut eksterne lydenheder via et 3.5 mm kabel.
Bagpanel
- BT ANT (Bluetooth Antenna): Connect the included Bluetooth antenna for optimal wireless range.
- R OUT / L OUT (Speaker Outputs): Connect passive speakers using banana plugs. Supports 2-channel stereo output (50W x 2 @ 8 Ohm).
- LINE INPUT (RCA L/R): Connect external audio sources using RCA cables.
- DC 24V (Power Input): Tilslut den medfølgende 24V DC strømadapter.
Figure 3: Pyle PDA35BT Front and Rear Views
This image provides a clear visual of the Pyle PDA35BT amplifier from both the front and rear, detailing the layout of all control knobs, input jacks, output terminals, and the Bluetooth antenna connection point.
Opsætning
- Tilslut højttalere:
Tilslut dine passive højttalere til R UD og L UD terminals on the rear panel using banana plugs. Ensure correct polarity (red to red, black to black) for optimal sound quality. This amplifier is designed for bookshelf or small outdoor speakers, not large 10-12 inch speakers or subwoofers.
- Tilslut Bluetooth-antenne:
Screw the included Bluetooth antenna onto the BT ANT connector on the rear panel.
- Connect Audio Source (Optional - Wired):
- For RCA input: Connect your audio device (e.g., CD player, TV) to the LINE INPUT (RCA L/R) on the rear panel using RCA cables.
- For 3.5mm AUX input: Connect your audio device (e.g., smartphone, tablet) to the AUX-IN (3.5 mm) stikket på frontpanelet ved hjælp af et 3.5 mm lydkabel.
- Tilslut strøm:
Connect the included 24V DC wall power adapter to the DC 24V input on the rear panel, then plug the adapter into a suitable wall outlet.
Betjeningsvejledning
- Tænd/sluk:
Drej på Volume/ON/OFF Knob clockwise to turn the unit on. The Strømindikator (1) will illuminate. Rotate counter-clockwise until it clicks to turn off.
- Bluetooth-parring:
- Sørg for Inputvælger (3) is set to BT. De BT-indikator (2) will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Pyle Audio" or "PDA35BT".
- Vælg amplifier from the list to pair. Once connected, the BT-indikator (2) will glow solid blue.
- The Bluetooth version is 4.0, offering a range of approximately 30 feet. If no device connects within a certain time, the amplifier may time out. Turn the unit off and on again to re-enter pairing mode.
- Using AUX Input:
- For 3.5mm AUX-IN (front panel): Connect your device and set the Inputvælger (3) til LINE.
- For RCA LINE INPUT (rear panel): Connect your device and set the Inputvælger (3) til LINE.
- Hovedtelefonudgang:
Sæt dine hovedtelefoner i Headphone Jack (1/4'') (4) on the front panel. The speaker outputs will automatically mute when headphones are connected.
- Justering af lydstyrke:
Brug Volume/ON/OFF Knob (5) to adjust the overall output volume.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power adapter not connected or faulty; unit not turned on. | Ensure power adapter is securely connected and plugged into a working outlet. Rotate the Volume/ON/OFF knob clockwise to turn on. |
| Ingen lyd fra højttalerne | Speakers not connected correctly; input selector incorrect; volume too low; headphones connected. | Check speaker wire connections and polarity. Verify Input Selector is set to the correct source. Increase volume. Disconnect headphones if speakers are desired. |
| Bluetooth ikke parring | Enhed ikke i parringstilstand; enhed for langt væk; interferens | Ensure Input Selector is set to BT and BT Indicator is flashing. Move device closer to the amplifier (within 30ft). Turn amplifier off and on again to reset Bluetooth. |
| Forvrænget lyd | Volume too high; faulty cables; speaker impedance mismatch. | Reduce volume. Check and replace audio cables if necessary. Ensure speakers are compatible (8 Ohm recommended). |
Specifikationer
| Feature | Specifikation |
|---|---|
| Udgangseffekt | 100 Watts (RMS: 50 Watt x 2 @ 8 Ohm) |
| Antal kanaler | 2 |
| Bluetooth version | 4.0 |
| Bluetooth rækkevidde | Ca. 30 fod |
| Indgange | 3.5mm AUX-IN (Front), RCA (L/R) Line Input (Rear) |
| Udgange | Banana Plugs (Speaker), 1/4'' Headphone Jack |
| Maksimal forsyning Voltage | 24 volt (DC) |
| Varedimensioner (L x B x H) | 4.9 cm x 3.6 cm x 1.9 cm |
| Varens vægt | 1.06 pund |
Opretholdelse
- Rengør enheden med en blød, tør klud. Brug ikke flydende rengøringsmidler eller aerosoler.
- Keep the unit free from dust and debris to ensure proper ventilation.
- Opbevar ampOpbevar apparatet på et køligt og tørt sted, når det ikke er i brug.
Garanti og support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Pyle webwebsted. Gem din købsbevis i tilfælde af garantikrav.
